| Menu Item | Options | Description |
|---|---|---|
| Internal PCI/IDE | Both Primary Secondary Disabled |
Enables/disables onboard primary & secondary IDE controllers. |
| Onboard FDD Controller | Enabled Disabled |
Enables/disables the onboard floppy controller. |
| FDC Write Protect | Disabled Enabled |
Disables/enables write protection for the onboard Floppy Disk Controller |
| Onboard Serial Port 1 | 2E8/IRQ3 2F8/IRQ3 3E8/IRQ4 3F8/IRQ4 Auto Disabled |
Allows the user to disable/enable the onboard serial ports. 3F8 through 2E8 correspond to COM1 through COM4 port assignments, respectively. |
| Onboard Parallel Port | 278/IRQ5 378/IRQ7 3BC/IRQ7 Disabled |
Allows the user to disable/enable the onboard parallel port. 3BC, 378 and 278 correspond to printer ports LPT3, LPT2 and LPT1, respectively. |
| Onboard Parallel Mode | Bi-Direct Output Only ECP/EPP |
Allows the user to select the operating mode for the onboard parallel port. |
| USB Controller | Enabled Disabled |
Enables/disables the USB bus. |
| USB Keyboard Support | Disabled Enabled |
Enables/disables use of a USB keyboard. This option only funtions if the USB bus is enabled in the previous option. |
| Delay for HDD (Secs) | (0-15) | Allows the user to set the hard disk pre-delay to 0-15 seconds, allowing the drive to spin up prior to the Ultra-DMA controller attempting to recognize it. |
| 0.5MB 1.0MB 1.5MB 2.0MB 2.5MB 3.0MB 3.5MB 4.0MB |
Allows the user to set the size of the shared VGA memory block. | |
| ESS1869 Sound Chip | Enabled Disabled |
Enables/disables the onboard audio component. |
| Report No FDD for Win95 | No Yes |
When enabled, Windows95 will not recognize the presence of the floppy drive. |