[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**????? (Profusion) c:99
Chips:
Memory Access Controller (MAC)
Data Interface Buffer (DIB)
CPUs: 8x P-III Xeon Oct
DRAM Types: SDRAM PC100 2-way Interleave dual channel
Max Mem: 32GB
ECC/Parity: ECC
AGP speed: N/A
Bus Speed: 100
PCI Clock/Bus: 1/3 PCI-66/64
**800 series...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
**5591/5592/5595 (David) Pentium PCI A.G.P. Chipset <01/09/98
***Info:
The SiS5591/5592 SiS5595 glueless P5 A.G.P. chipset provides a high
performance/cost index Desktop/Mobile solution for the Intel Pentium
P54C/P55C, AMD K5/K6, and Cyrix M1/M2 A.G.P. system.
The SiS5591/SiS5592 A.G.P./PCI controller integrated the Host-to-PCI
bridge, the L2 cache controller, the DRAM controller, the Accelerated
Graphics Port interface, and the PCI IDE controller. The L2 cache
controller can support up to 1 M P.B. SRAM, and the DRAM controller
can support EDO/FP/SDRAM memory up to 768 MB with optional ECC or
parity check function. The A.G.P. 1.0 compliance interface supports
both 1X, and 2X speed mode with sideband address capability. The
built-in fast PCI IDE controller supports the ATA PIO/DMA, and the
Ultra DMA/33 functionality.
SiS5591 and SiS5592 have some pin-out switching to facilitate the
main-board layout. SiS5591 pin assignment is based on the ATX form
factor, and SiS5592 pin assignment is based on the NLX form
factor. Beside the pin-out switching, SiS5591 and SiS5592 is totally
the same on the internal logic circuit.
The SiS5595 PCI system I/O integrates the PCI-to-ISA bridge with the
DDMA, and Serial IRQ capability, the ACPI/Legacy PMU, the Data
Acquisition Interface, the Universal Serial Bus host/hub interface,
and the ISA bus interface which contains the ISA bus controller, the
DMA controllers, the interrupt controllers, and the Timers. It also
integrates the Keyboard controller, and the Real Time Clock (RTC). The
built-in USB controller, which is fully compliant to OHCI (Open Host
Controller Interface), provides two USB ports capable of running
full/low speed USB devices. The Data Acquisition Interface offers the
ability of monitoring and reporting the environmental condition of the
PC. It could monitor 4 positive analogue voltage inputs, 2 Fan speed
inputs, and one temperature input.
***Configurations:...
***Features:...
**5596/5513 (Genesis) Pentium PCI Chipset <03/26/96...
**5597/5598 (Jedi) Pentium PCI/ISA Chipset <04/15/97...
**530/5595 (Sinbad) Host, PCI, 3D Graphics & Mem. Ctrl.<11/10/98...
**540 (Spartan) Super7 2D/3D Ultra-AGP Single C.S.<11/30/99...
**55x SoC (System-on-chip) <03/14/02...
**
**Support chips:
**85C206 Integrated Peripheral Controller [no datasheet] ?...
**5595 Pentium PCI System I/O <12/24/97...
**950 LPC I/O <07/16/99...
**Other:...
**PII/III/Pro...
**Athlon etc...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
**W83977F/G/AF/AG WINBOND I/O (Multi I/O) c97
***Info:
GENERAL DESCRIPTION
This data sheet covers two products: W83977F/G, and W83977AF/AG whose
pin assignment, and most of the functions are the same. W83977AF/AG is
an advanced version of W83977F/G featuring the FIR function.
W83977F/G, W83977AF/AG are evolving products from Winbond’s most
popular I/O chip W83877F -- which integrates the disk drive adapter,
serial port (UART), IrDA 1.0 SIR, parallel port, configurable
plug-and-play registers in one chip --- plus additional powerful
features: ACPI, 8042 keyboard controller with PS/2 mouse support, Real
Time Clock, 14 general purpose I/O ports, full 16-bit address
decoding, TV remote IR (Consumer IR, supporting NEC, RC-5, extended
RC-5, and RECS-80 protocols). In addition, W83977AF/AG provides the
functions of IrDA 1.1 (MIR for 1.152M bps or FIR for 4M bps).
The disk drive adapter functions of W83977F/G, W83977AF/AG include a
floppy disk drive controller compatible with the industry standard
82077/ 765, data separator, write pre-compensation circuit, decode
logic, data rate selection, clock generator, drive interface control
logic, and interrupt/ DMA logic. The wide range of functions
integrated onto the W83977F/G, W83977AF/AG greatly reduces the number
of components required for interfacing with floppy disk drives. The
W83977F/G, W83977AF/AG supports up to four 360K, 720K, 1.2M, 1.44M, or
2.88M disk drives and data transfer rates of 250 Kb/s, 300 Kb/s, 500
Kb/s,1 Mb/s, and 2 Mb/s.
The W83977F/G, W83977AF/AG provide two high-speed serial communication
ports (UARTs), one of which supports serial Infrared communication.
Each UART includes a 16-byte send/receive FIFO, a programmable baud
rate generator, complete modem control capability, and a processor
interrupt system. Both UARTs provide legacy speed with baud rate
115.2k and provide advanced speed with baud rate 230k, 460k, and 921k
bps which support higher speed modems. W83977AF/AG alone provides
independent 3rd UART (32-byte FIFO) dedicated for IR function.
The W83977F/G, W83977AF/AG supports one PC-compatible printer port
(SPP), Bi-directional Printer port (BPP) and also Enhanced Parallel
Port (EPP) and Extended Capabilities Port (ECP). Through the printer
port interface pins, also available are: Extension FDD Mode and
Extension 2FDD Mode allowing one or two external floppy disk drives to
be connected.
The configuration registers support mode selection, function
enable/disable, and power down function selection. Furthermore, the
configurable PnP features are compatible with the plug-and-play
feature demand of Windows 95TM, which makes system resource allocation
more efficient than ever.
W83977F/G, W83977AF/AG provides functions that comply with ACPI
(Advanced Configuration and Power Interface), which includes support
of legacy and ACPI power management through SMI or SCI function
pins. W83977F/G, W83977AF/AG also has auto power management to reduce
power consumption.
The keyboard controller is based on 8042 compatible instruction set
with a 2K Byte programmable ROM and a 256-Byte RAM bank. Keyboard BIOS
firmware is available with optional AMIKEY-2, Phoenix MultiKey/42, or
customer code.
The W83977F/G, W83977AF/AG provides a set of flexible I/O control
functions to the system designer through a set of General Purpose I/O
ports. These GPIO ports may serve as simple I/O or may be individually
configured to provide a pre-defined alternate function.
W83977F/G, W83977AF/AG is made to fully comply with Microsoft PC97
Hardware Design Guide. IRQs, DMAs, and I/O space resource are flexible
to adjust to meet ISA PnP requirement. Full 16-bit address decoding is
also provided. Moreover W83977F/G, W83977AF/AG is made to meet the
specification of PC97‘s requirement in the power management: ACPI and
DPM (Device Power Management).
***Versions:...
***Features:...
**W83977TF WINBOND I/O (Multi I/O) c97...
**W83977EF WINBOND I/O (Multi I/O) <98...
**W83977ATF WINBOND I/O (Multi I/O) <98...
**
**Disk Controller:
**W83759/A/F/AF Advanced VL-IDE Disk Controller <96...
**W83769 Local Bus IDE Solution <94...
**
**UARTS:
**W86C250A UART (equivalent of INS8C250A) [no datasheet]
**W86C450/P Universal Asynchronous Receiver/Transmitter <Jul89...
**W86C451 I/O controller for IBM PC/AT/XT <Jul89...
**W86C452 I/O controller for IBM PC/AT Jul89...
**W86C456 I/O controller [no datasheet] ?
**W860551/P UART with FIFO and Printer Port Controller <94...
**
**Other:...
*ZyMOS...
*General Sources:...
(c) Copyright mR_Slugs Warehouse - All rights Reserved