[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**????? (Profusion) c:99
Chips:
Memory Access Controller (MAC)
Data Interface Buffer (DIB)
CPUs: 8x P-III Xeon Oct
DRAM Types: SDRAM PC100 2-way Interleave dual channel
Max Mem: 32GB
ECC/Parity: ECC
AGP speed: N/A
Bus Speed: 100
PCI Clock/Bus: 1/3 PCI-66/64
**800 series...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
**5581/5582 (Jessie) Pentium PCI/ISA Chipset (75MHz) <04/15/97
***Info:...
***Configuration:...
***Features:
o Support Intel Pentium CPU and other compatible CPU host bus at
50/55/60/66/75 MHz
o Support CPU with MMX feature
o Support the Pipelined Address Mode of Pentium CPU
o Support the Full 64-bit Pentium Processor data Bus
o Meet PC97 Requirements
o Integrated Second Level (L2) Cache Controller
- Write Back Cache Modes
- 8 bits or 7 bits Tag with Direct Mapped Cache Organization
- Integrated 16K bits Dirty RAM
- Support Pipelined Burst SRAM
- Support 256 KBytes and 512 KBytes Cache Sizes
- Cache Hit Read/Write Cycle of 3-1-1-1
- Cache Back-to-Back Read/Write Cycle of 3-1-1-1-1-1-1-1
o Integrated DRAM Controller
- Support 6 RAS Line (3 Banks) of FPM/EDO/SDRAM DIMMs/SIMMs
- Support 2Mbytes to 384Mbytes of main memory
- Support Cacheable DRAM Sizes up to 128 MBytes.
- Support 256K/512K/1M/2M/4M/8M/16M/32M x N FPM/EDO/SDRAM DRAM
- Support 64 Mb DRAM Technology
- Support 3.3V or 5V DRAM.
- Supports Symmetrical and Asymmetrical DRAM.
- Support 32 bits/64 bits mixed mode configuration
- Support Concurrent Write Back
- Support CAS before RAS Refresh
- Support Relocation of System Management Memory
- Programmable CAS#, RAS#, RAMWE# and MA Driving Current.
- Fully Configurable for the Characteristic of Shadow RAM (640
KBytes to 1 MBytes)
- Support FPM DRAM 5-3-3-3(-3-3-3-3) Burst Read Cycles
- Support EDO DRAM 5-2-2-2(-2-2-2-2) Burst Read Cycles
- Support SDRAM 6-1-1-1(-2-1-1-1) Burst Read Cycles
- Support X-1-1-1/X-2-2-2/X-3-3-3 Burst Write Cycles
- Support 8 Qword Deep Buffer for Read/Write Reordering, Dword
Merging and 3/2-1-1-1 Post write Cycles
- Two Programmable Non-Cacheable Regions
- Option to Disable Local Memory in Non-Cacheable Regions
- Shadow RAM in Increments of 16 KBytes
o Integrated PMU Controller
- Meet ACPI Requirements
- Support Both ACPI and Legacy PMU
- Support Suspend to Disk
- Support SMM Mode of CPU
- Support CPU Stop Clock
- Support Power Button for ACPI function
- Support Automatic Power Control for system power off function
- Support Modem Ring-in, RTC Alarm Wake up
- Support Thermal Detection
- Support GPIOs, and GPOs for External Devices Control
- Support Programmable Chip Select
o Provides High Performance PCI Arbiter.
- Support up to 5 PCI Masters
- Support Rotating Priority Mechanism
- Hidden Arbitration Scheme Minimizes Arbitration Overhead.
- Support Concurrency between CPU to Memory and PCI to PCI
o Integrated Host-to-PCI Bridge
- Support Asynchronous and Synchronous PCI Clock
- Translates the CPU Cycles into the PCI Bus Cycles
- Provides CPU-to-PCI Read Assembly and Write Disassembly
Mechanism
- Translates Sequential CPU-to-PCI Memory Write Cycles into PCI
Burst Cycles
- Zero Wait State Burst Cycles
- Support IDE Posted Write
- Support Pipelined Process in CPU-to-PCI Access
- Support Advance Snooping for PCI Master Bursting
- Maximum PCI Burst Transfer from 256 Bytes to 4 KBytes
o Integrated Posted Write Buffers and Read Prefetch Buffers to
Increase System Performance
- CPU-to-Memory Posted Write Buffer (CTMFF) with 8 QW Deep,
Always Sustains 0 Wait Performance on CPU-to-Memory.
- CPU-to-Memory Read Buffer with 4 QW Deep
- CPU-to-PCI Posted Write Buffer(CTPFF) with 8 DW Deep
- PCI-to-Memory Posted Write Buffer(PTHFF) with 8 QW Deep,
Always Streams 0 Wait Performance on PCI-to/from-Memory Access
- PCI-to-Memory Read Prefetch Buffer(CTPFF) with 8 QW Deep
o Integrated PCI-to-ISA Bridge
- Translates PCI Bus Cycles into ISA Bus Cycles
- Translates ISA Master or DMA Cycles into PCI Bus Cycles
- Provides a Dword Post Buffer for PCI to ISA Memory cycles
- Two 32 bit Prefetch/Post Buffers Enhance the DMA and ISA Master
Performance
- Fully Compliant to PCI 2.1
o Enhanced DMA Functions
- 8-, 16- bit DMA Data Transfer
- ISA compatible, and Fast Type F DMA Cycles
- Two 8237A Compatible DMA Controllers with Seven Independent
Programmable Channels
- Provides the Readability of the two 8237 Associated Registers
- Support Distributed DMA
o Built-in Two 8259A Interrupt Controllers
- 14 Independently Programmable Channels for Level- or Edge-
triggered Interrupts
- Provides the Readability of the two 8259A Associated Registers
- Support Serial IRQ
o Three Programmable 16-bit Counters compatible with 8254
- System Timer Interrupt
- Generates Refresh Request
- Speaker Tone Output
- Provides the Readability of the 8254 Associated Registers
o Built-in Keyboard Controller
- Hardwired Logic Provides Instant Response
- Support PS/2 Mouse interface
- Support Hot Key "Wake-up" Function
- Capable of Enable/Disable Internal KBC and PS2 Mouse
o Built-in Real Time Clock(RTC) with 256B CMOS SRAM
- Built-in up to one Month Alarm for ACPI
o Fast PCI IDE Master/Slave Controller
- Bus Master Programming Interface for ATA Windows 95 Compliant
Controller
- Support PCI Bus Mastering
- Plug and Play Compatible
- Support Scatter and Gather
- Support Dual Mode Operation - Native Mode and Compatibility
Mode
- Support IDE PIO Timing Mode 0, 1, 2 ,3 and 4
- Support Multiword DMA Mode 0, 1, 2
- Support Ultra DMA/33
- Two Separate IDE Bus
- Two 16 Dword FIFO for PCI Burst Transfers.
o Universal Serial Bus Host Controller
- OpenHCI Host Controller with Root Hub
- Two USB ports
- Support Over Current Detection
- Support Legacy Devices
o Support I2C serial Bus
o Support the Reroutibility of the four PCI Interrupts
o Support 2Mb Flash ROM Interface
o Support NAND Tree for ball connectivity testing
o 553-Balls BGA Package
o 0.35μm 3.3V Technology
**5591/5592/5595 (David) Pentium PCI A.G.P. Chipset <01/09/98...
**5596/5513 (Genesis) Pentium PCI Chipset <03/26/96...
**5597/5598 (Jedi) Pentium PCI/ISA Chipset <04/15/97...
**530/5595 (Sinbad) Host, PCI, 3D Graphics & Mem. Ctrl.<11/10/98...
**540 (Spartan) Super7 2D/3D Ultra-AGP Single C.S.<11/30/99...
**55x SoC (System-on-chip) <03/14/02...
**
**Support chips:
**85C206 Integrated Peripheral Controller [no datasheet] ?...
**5595 Pentium PCI System I/O <12/24/97...
**950 LPC I/O <07/16/99...
**Other:...
**PII/III/Pro...
**Athlon etc...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
**WD76C30x Perip. Ctrl, Interrupt Multiplex, and Clock Gen <11/18/91
***Notes:...
***Info:
GENERAL
The WD76C30/LV device provides three functional groups. It is a Per-
ipheral Controller, Interrupt Multiplexer, and Clock Generator.
The low power CMOS WD76C30/LV is a single device solution which
provides interrupt multiplexing logic, clock generation, two serial
ports, and one bidirectional parallel port.
Interrupt multiplexing logic interfaces the PC/AT interrupt request
lines with the WD76C10 Single Chip AT Controller.
Integrated clock generation circuitry uses the 48 MHz input signal to
generate the 1.8462, 3.072, and 8.0 MHz clocks used internally for the
two serial ports, a 9.6 MHz Signal used for the keyboard controller
and floppy controller, a programmable duty/frequency clock for the
80287 coprocessor, and a 16 MHz clock for driving the WD76C10 Single
Chip AT Controller, and floppy controller.
For low power implementations such as laptops, oscillator disable and
sleep modes are available to power down unused logic.
The bidirectional parallel port is software configurable as either a
PC/AT or a PS/2 compatible port. The parallel port data lines and open
drain printer signals have high current drive capabilities.
Each ACE is programmable as either a WD16C550 or WD16C450 compatible
device. Each WD16C550 configured ACE is capable of buffering up to 16
bytes of data upon reception, relieving the CPU of interrupt
overhead. Buffering of data also allows greater latency time in
interrupt servicing which is vital in a multitasking environment. Each
ACE has a maximum recommended data rate of 512 Kbaud.
WD76C30/LV DIFFERENCES
Both the WD76C30 and WD76C30LV operate with two power supplies. The
WD76C30 logic is powered by a 5.0 volt supply, while the WD76C30LV
logic is powered by a 3.3 volt supply. The parallel and serial port
interfaces are only supported by the WD76C30.
PERIPHERAL CONTROLLER
The peripheral controller is functionally equivalent to the WD16C452/
552. The mode of operation of the serial ports and parallel port is
selectable via the Mode Select Register. Each serial port is
configurable as either a FIFO enhanced ACE (WD16C550 compatible) or a
standard ACE (WD16C450). The parallel port is configurable as either a
PS/2 bidirectional parallel port or a PC/AT compatible parallel port.
A detailed description of the Mode Selection Register is described in
the parallel port section.
***Versions:...
***Features:...
**WD7615 Desktop Buffer Manager <04/15/92...
**WD7625 Desktop Buffer Manager <10/01/92...
**WD8120LV Super I/O [no datasheet] ?
**Other Chips:...
*Winbond...
*ZyMOS...
*General Sources:...
(c) Copyright mR_Slugs Warehouse - All rights Reserved