[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq  . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**?????  (Profusion)    c:99
Chips:         
Memory Access Controller (MAC)  
Data Interface Buffer (DIB)
CPUs:          8x P-III Xeon Oct
DRAM Types:    SDRAM PC100 2-way Interleave dual channel
Max Mem:       32GB
ECC/Parity:    ECC
AGP speed:     N/A
Bus Speed:     100
PCI Clock/Bus: 1/3 PCI-66/64



**800 series...
*Headland/G2...
**HT22          386SX/286 Single Chip (25 MHz)                 c:Sep91
***Info:
The HT22  is an  advanced PC/AT compatible,  single-chip 80386SX/80286
system  design solution.   This highly  integrated single  chip allows
simple, low  cost system design  options while featuring  high perfor-
mance,  low  power  consumption,  and  minimum  board  space  require-
ments. Advanced  memory management  features include support  for page
mode,  2 or  4-way interleaving  in both  pipelined  and non-pipelined
modes.  The EMS  4.0 hardware implementation features dual  sets of 32
registers   with  full   context  support   for   highest  performance
optimization  of  extended local  memory  accesses.   An advanced  EMS
hardware  write-protect option  has  been added  for  maximum EMS  4.0
compatibility. The HTZ2 supports 256K, 1M  and 4MB DRAMs in 1 by 1 and
1 by 4 device configurations for up to 20MB of on-board system memory.
16MB  is  addressed  directly   by  system  resources,  the  remainder
addressed by the EMS mode.

A flexible Shadow  RAM option for System and Video BIOS  as well as 8-
16-bit BIOS options adds to overall design versatility.

A  complete PC/AT  compatible  system with  advanced  features may  be
implemented with minimal external support logic. The HT22 performs all
CPU  and peripheral support  functions in  a single  chip.  Integrated
device  functions include  DMA Controllers,  a Memory  Mapper, Timers,
Counters, Interrupt  Controllers, a Bus Controller  and all supporting
circuitry for PC  core logic requirements. The chip  also contains all
the  necessary  address buffers,  data  transceivers, memory  drivers,
parity  checking   and  supporting  circuitry  for   a  complete  high
performance computer  solution.  An  asynchronous AT Bus  clock allows
for  a constant 8MHz  Bus clock  rate for  highest bus  device compat-
ibility as  defined in IEEE  Spec P996. This  device is packaged  in a
208-pin Plastic Quad Flat Pack.

***Configurations:...
***Features:...
**HT25          3-volt Core Logic for 386SX                    c:Dec92...
**HT35          Single-Chip Peripheral Controller [partial info]     ?...
**HTK320        386DX Chip Set                                 c:Sep91...
**HTK340        "Shasta" 486 Chip Set                          c:Jun92...
**Support Chips:
**HT44          Secondary Cache                                c:Jun92...
**Other:...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
**5595       Pentium PCI System I/O                          <12/24/97
***Notes:...
***Info:
SiS5595  is a  highly integrated  system I/O  that constitutes  a high
performance, rich featured, yet glueless solution for both Pentium and
Pentium  II  systems.   

The SiS5595 PCI  system I/O integrates the PCI-to-ISA  bridge with the
DDMA and PC/PCI  DMA, Serial IRQ capability, the  ACPI/Legacy PMU, the
Data  Acquisition   Interface,  the  Universal   Serial  Bus  host/hub
interface,  and the  ISA bus  interface,  which contains  the ISA  bus
controller, the  DMA controllers,  the interrupt controllers,  and the
Timers.  It also integrates the Keyboard controller, and the Real Time
Clock (RTC).  The built-in USB controller, which is fully compliant to
OHCI (Open Host Controller  Interface), provides two USB ports capable
of running full/low speed  USB devices. The Data Acquisition Interface
offers  the  ability of  monitoring  and  reporting the  environmental
condition  of the  PC.  It  could monitor  5  positive analog  voltage
inputs, 2  Fan speed inputs,  and one external temperature  inputs. It
also integrates the automatic power control logic to control the power
ON/OFF for ATX power supply.  In addition, SiS5595 also integrates the
thermal  detection and frequency  ratio control  logic for  Pentium II
CPU.

***Versions:...
***Features:...
**950        LPC I/O                                         <07/16/99...
**Other:...
**PII/III/Pro...
**Athlon etc...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
*ZyMOS...
*General Sources:...