[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**82495XP/490XP Cache Controller / Cache RAM (for i860) 06/05/91
***Notes:...
***Info:...
***Features:...
**82496/491 Cache Controller / Cache RAM (for P5 Pentium) 03/22/93...
**82497/492 Cache Controller / Cache RAM (for P54 Pentium) <Nov94...
**82498/493 Cache Controller / Cache RAM (for P54 Pentium) <Nov94...
**
**Later chipsets (basic spec):
**440 series:...
**450NX (?) 06/29/98:...
**????? (Profusion) c:99...
**800 series...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
**5596/5513 (Genesis) Pentium PCI Chipset <03/26/96
***Info:
The SiS5596/5513 with built-in VGA controller is a two-chip solution
for Pentium PCI/ISA system. A portion of on board DRAM is shared with
the built-in VGA controller. In that way, the system cost is
substantially reduced.
The SiS5596/5513 two chips solution for shared memory architecture is
achieved by allowing both GUI / VGA, and System DRAM controller to
control system memory. For the shared memory application, the chipset
always acts as the arbiter of memory bus masters. Whenever the GUI
wants to access the memory bus, it requests the memory bus from the
chipset first. The chipset grants the memory bus to the GUI, only if
the memory bus is not needed by the chipset. The chipset also supports
the two priority scheme. Other important key features such as direct
access frame buffer and memory access latency are also supported.
***Configurations:...
***Features:...
**5597/5598 (Jedi) Pentium PCI/ISA Chipset <04/15/97...
**530/5595 (Sinbad) Host, PCI, 3D Graphics & Mem. Ctrl.<11/10/98...
**540 (Spartan) Super7 2D/3D Ultra-AGP Single C.S.<11/30/99...
**55x SoC (System-on-chip) <03/14/02...
**
**Support chips:
**85C206 Integrated Peripheral Controller [no datasheet] ?...
**5595 Pentium PCI System I/O <12/24/97...
**950 LPC I/O <07/16/99...
**Other:...
**PII/III/Pro...
**Athlon etc...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
**VL82C108 TOPCAT Combination I/O chip ?
***Info:
The VL82C108 Combo chip replaces with a single 100-pin chip, several
of the commonly used peripherals found in PC/AT-compatible
computers. This chip, when used with VLSI PC/AT-compatible chip set,
allows designers to implement a very cost-effective minimum chip count
motherboard containing functions that are common to virtually all PCs.
The on-chip UART is completely software compatible with the VL16C450
ACE.
The bidirectional parallel port provides a PS/2 software compatible
interface between a Centronics-type printer and the VL82C108. Direct
drive is provided so that all that is needed to interface to the line
printer is a resistor/ capacitor network. the bidirectional feature
(option) is software programmable for backwards PC/AT-compatibility.
The keyboard/mouse controller is selectable as PC/AT- or PS/2-
compatible.
Included is the control logic necessary for the support of the
Integrated Drive Electronics (IDE) hard disk bus interface. Hard disk
drives which support the IDE interface often refer to the interface as
"AT Bus" compatible or "Embedded AT Bus" compatible.
The Combo I/O chip also includes selectable chip selects for the
internal UART and printer port, and four fixed chip selected for
external floppy and hard disk controllers.
***Versions:...
***Features:...
**VL82C110 Combination I/O chip ?...
**VL82C113 SCAMP Combination I/O chip ?...
**VL82C114 Combination I/O chip ?...
**Video: ...
**Disk:...
**Modems:...
**Other:...
**Not sure if they actually exist...
*Western Digital...
*Winbond...
*ZyMOS...
*General Sources:...
(c) Copyright mR_Slugs Warehouse - All rights Reserved