[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**82495DX/490DX DX CPU-Cache Chip Set <Sep91
***Notes:...
***Info:
The 50 MHz Intel486 DX CPU-Cache Chip Set provides a high performance
solution for servers and high-end desktop systems. This binary
compatible solution has been optimized to provide 50 MHz, zero wait
state performance. The CPU-Cache chip set combines the 50 MHz Intel486
Microprocessor with the 82495DX/82490DX cache subsystem. It delivers
integer performance of 41 V1.1 Dhrystone MlPs and a SPEC integer
rating of 27.9. The cache subsystem features the 82495DX Cache
Controller and the 82490DX Dual Ported Data RAM. Dual ported buffers
and registers of the 82490DX allow the 82495DX Cache Controller to
concurrently handle CPU bus, memory bus, and internal cache operations
for maximum performance.
The CPU-Cache Chip Set offers many features that are ideal for multi-
processor based systems. The Write-Back feature provides efficient
memory bus utilization by reducing bus traffic through eliminating
unnecessary writes to main memory. The CPU-Cache chip set also
supports MESI protocol and monitors the memory bus to guarantee cache
coherency.
The 50 MHz Intel486 DX CPU and 82495DX/82490DX Cache subsystem are
produced on Intel's latest CHMOS V process which features submicron
technology and triple layer metal.
3.0 ARCHITECTURAL OVERVIEW
3.1 Introduction
The Intel486 CPU-cache chip set provides a tightly coupled processing
engine based on the Intel486 microprocessor and a cache subsystem
comprised of the 82495DX cache controller and multiple 82490DX cache
components. Figure 3.1 [see datasheet] diagrams the basic config-
uration.
The cache subsystem provides a gateway between the CPU and the memory
bus. All CPU accesses that can be serviced locally are transparent to
the memory bus and serve to avoid bus traffic. As a result, the cache
chip set reduces memory bus bandwidth to both increase Intel486
processor performance and support efficient multiprocessor systems.
The cache subsystem also decouples the CPU from the memory bus to
provide zero-wait-state operation at high clock frequencies while
allowing relatively slow and inexpensive memories.
The CPU-cache chip set prevents latency and bandwidth bottlenecks
across a variety of uniprocessor and multiprocessor designs. The
processor’s on-chip cache supports a very wide CPU data bus and
high-speed data movement. The second-level cache greatly extends the
capabilities of the on-chip cache resources, enabling a larger portion
of memory cycles to be satisfied independently of the memory bus.
3.2 CPU-Cache Chip Set Description
The chip set is comprised of three functional blocks:
3.2.1 CPU
The chip set includes a special version of the Intel486DX micropro-
cessor at 50 MHz. The Intel486DX Microprocessor Data Sheet provides
complete component specifications.
3.2.2 CACHE CONTROLLER
The 82495DX cache controller is the main control element for the chip
set. providing tags and line states. and determining cache hits and
misses. The 82495DX executes all CPU bus requests and coordinates all
main memory accesses with the memory bus controller (MBC).
The 82495DX controls the data paths of the 82490DX cache components
for cache hits and misses and furnishes the CPU with needed data. The
controller dynamically adds wait states as needed using the most
recently used (MRU) prediction algorithm.
The 82495DX also performs memory bus snoop operations in shared memory
systems and drives the cycle address and other attributes during
memory bus accesses. Figure 3.2 [see datasheet] diagrams the 82495DX.
3.2.3 CACHE SRAM
Multiple 82490DX cache components provide the cache SRAM and data
path. Each component includes the latches, muxes and logic needed to
work in lock step with the 82495DX to efficiently serve both hit and
miss accesses. The 82490DX components take full advantage of VLSI
silicon flexibility to exceed the capabilities of discrete
implementations. The 82490DX components support zero-wait-state hit
accesses and concurrent CPU and memory bus accesses, and they
replicate MRU bits for autonomous way prediction. During memory bus
cycles. the 82490DX components act as a gateway between CPU and memory
buses. Figure 3.3 [see datasheet] diagrams an 82490DX cache component.
3.3 Secondary Cache Features
The 82495DX cache controller and 82490DX cache components provide a
unified, software transparent secondary data and instruction cache.
The cache enables a highspeed processor core that provides efficient
performance even when paired with a significantly slower memory bus.
The secondary cache interprets CPU bus cycles and can service most
memory read and write cycles without accessing main memory. I/O and
other special cycles are passed directly to the memory bus. The cache
has a dual-port structure that permits concurrent CPU and memory bus
operation.
The 82495DX cache controller contains the 8K tag entries and logic
needed to support a cache as large as 256K. Combinations of between 4
and 9 82490DX cache SRAMs are used to create caches ranging from 128K
to 256K, with or without data parity.
The MBC provides logic needed to interface the CPU, 82495DX and
82490DX to the memory bus. Because the MBC also affects system
performance. its design can be the basis of product differentiation.
***Configurations:...
***Features:...
**82495XP/490XP Cache Controller / Cache RAM (for i860) 06/05/91...
**82496/491 Cache Controller / Cache RAM (for P5 Pentium) 03/22/93...
**82497/492 Cache Controller / Cache RAM (for P54 Pentium) <Nov94...
**82498/493 Cache Controller / Cache RAM (for P54 Pentium) <Nov94...
**
**Later chipsets (basic spec):
**440 series:...
**450NX (?) 06/29/98:...
**????? (Profusion) c:99...
**800 series
***810 (Whitney) 04/26/99...
***810L (Whitney) 04/26/99...
***810-DC100 (Whitney) 04/26/99...
***810e (Whitney) 09/27/99...
***810e2 (Whitney) 01/03/01...
***815 (Solano) 06/19/00...
***815e (Solano-2) 06/19/00...
***815em (Solano-?) 10/23/00...
***815ep (Solano-3) c:Nov'00...
***815p (Solano-3) c:Mar'01...
***815g (Solano-3) c:Sep'01...
***815eg (Solano-3) c:Sep'01...
***820 (Camino) 11/15/99...
***820e (Camino-2) 06/05/00...
***830M (Almador) 07/30/01...
***830MP (Almador) 07/30/01...
***830MG (Almador) 07/30/01...
***840 (Carmel) 10/25/99...
***845 (Brookdale) 09/10/01...
***845MP (Brookdale-M) 03/04/02...
***845MZ (Brookdale-M) 03/04/02...
***845E (Brookdale-E) 05/20/02...
***845G (Brookdale-G) 05/20/02...
***845GL (Brookdale-GL) 05/20/02...
***845GE (Brookdale-GE) 10/07/02...
***845PE (Brookdale-PE) 10/07/02...
***845GV (Brookdale-GV) 10/07/02...
***848P (Breeds Hill) c:Aug'03...
***850 (Tehama) 11/20/00...
***850E (Tehama-E) 05/06/02...
***852GM (Montara-GM) 01/14/03...
***852GMV (Montara-GM) ???...
***852PM (Montara-GM) 06/11/03...
***852GME (Montara-GM) 06/11/03...
***854 (?) 04/11/05...
***855GM (Montara-GM) 03/12/03...
***855GME (Montara-GM) 03/12/03...
***855PM (Odem) 03/12/03...
***860 (Colusa) 05/21/01...
***865G (Springdale) 05/21/03...
***865PE (Springdale-PE) 05/21/03...
***865P (Springdale-P) 05/21/03...
***865GV (Springdale-GV) c:Sep'03...
***875P (Canterwood) 04/14/03...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
**5120 Pentium PCI/ISA Chipset (Mobile) <01/28/97
***Info:...
***Versions:...
***Features:
o Support Intel Pentium CPU and other compatible CPU host bus
at 50/55/60/66/75 MHz
o Support the Pipelined Address Mode of Pentium CPU
o Support the Full 64-bit Pentium Processor data Bus
o Meet PC97 Requirements
o Integrated Second Level (L2) Cache Controller
- Write Back/Write Through Cache Modes
- 8 bits or 7 bits Tag with Direct Mapped Cache Organization
- Integrated 16K bits Dirty RAM
- Support Pipelined Burst SRAM
- Support 256 KBytes and 512 KBytes Cache Sizes
- Cache Hit Read/Write Cycle of 3-1-1-1
- Cache Back-to-Back Read/Write Cycle of 3-1-1-1-1-1-1-1
o Integrated DRAM Controller
- Support 6/3 Banks (Single/Double sided) of FPM/EDO/SDRAM
DIMMs/SIMMs
- Support 2Mbytes to 384Mbytes of main memory
- Support Cacheable DRAM Sizes up to 128 MBytes.
- Support 256K/512K/1M/2M/4M/8M/16M/32M x N FPM/EDO/SDRAM DRAM
- Support 64 Mb DRAM Technology
- Support 3.3V or 5V DRAM.
- Supports Symmetrical and Asymmetrical DRAM.
- Support 32 bits/64 bits mixed mode configuration
- Support Concurrent Write Back
- Support CAS before RAS Refresh
- Support Relocation of System Management Memory
- Programmable CAS#, RAS# and MA Driving Current, No Glue TTL
need in 2 banks (up to 64MB) configuration.
- Fully Configurable for the Characteristic of Shadow RAM (640
KBytes to 1 MBytes)
- Support FPM DRAM 5-3-3-3(-3-3-3-3) Burst Read Cycles
- Support EDO DRAM 5-2-2-2(-2-2-2-2) Burst Read Cycles
- Support SDRAM 6-1-1-1(-2-1-1-1) Burst Read Cycles
- Support X-1-1-1/X-2-2-2/X-3-3-3 Burst Write Cycles
- Support 8 Qword Deep Buffer for Read/Write Reordering, Dword
Merging and 3/2-1-1-1 Post write Cycles
- Two Programmable Non-Cacheable Regions
- Option to Disable Local Memory in Non-Cacheable Regions
- Shadow RAM in Increments of 16 KBytes
o Integrated PMU Controller
- Meet ACPI Requirements
- Support Both ACPI and Legacy PMU
- Support Suspend to Disk
- Support SMM Mode of CPU
- Support CPU Stop Clock
- Support Power Button
- Support Automatic Power Control
- Support Battery Management AC Indicator and LB,LLB
- Support Modem Ring-in, RTC Alarm Wake up
- Support Thermal Detection
- Support GPIOs, and GPOs for External Devices Control
- Support Two Programmable Chip Select
o Provides High Performance PCI Arbiter.
- Support up to 5 PCI Masters
- Support Rotating Priority Mechanism
- Hidden Arbitration Scheme Minimizes Arbitration Overhead.
- Support Concurrency between CPU to Memory and PCI to PCI.
- Support Concurrency between CPU to L2 Cache and PCI/ISA to DRAM.
o Integrated Host-to-PCI Bridge
- Support Asynchronous and Synchronous PCI Clock
- Translates the CPU Cycles into the PCI Bus Cycles
- Provides CPU-to-PCI Read Assembly and Write Disassembly
Mechanism
- Translates Sequential CPU-to-PCI Memory Write Cycles into PCI
Burst Cycles
- Zero Wait State Burst Cycles
- Support IDE Posted Write
- Support Pipelined Process in CPU-to-PCI Access
- Support Advance Snooping for PCI Master Bursting
- Maximum PCI Burst Transfer from 256 Bytes to 4 KBytes
o Integrated Posted Write Buffers and Read Prefetch Buffers to
Increase System Performance
- CPU-to-Memory Posted Write Buffer (CTMFF) with 8 QW Deep, Always
Sustains 0 Wait Performance on CPU-to-Memory.
- CPU-to-Memory Read Buffer with 4 QW Deep
- CPU-to-PCI Posted Write Buffer(CTPFF) with 8 DW Deep
- PCI-to-Memory Posted Write Buffer(PTHFF) with 8 QW Deep, Always
Streams 0 Wait Performance on PCI-to/from-Memory Access
- PCI-to-Memory Read Prefetch Buffer(CTPFF) with 8 QW Deep
o Integrated PCI-to-ISA Bridge
- Translates PCI Bus Cycles into ISA Bus Cycles
- Translates ISA Master or DMA Cycles into PCI Bus Cycles
- Provides a Dword Post Buffer for PCI to ISA Memory cycles
- Two 32 bit Prefetch/Post Buffers Enhance the DMA and ISA Master
Performance
- Fully Compliant to PCI 2.1
o Enhanced DMA Functions
- 8-, 16- bit DMA Data Transfer
- ISA compatible, and Fast Type F DMA Cycles
- Two 8237A Compatible DMA Controllers with Seven Independent
Programmable Channels
- Provides the Readability of the two 8237 Associated Registers
- Support Distributed DMA
o Built-in Two 8259A Interrupt Controllers
- 14 Independently Programmable Channels for Level- or Edge-
triggered Interrupts
- Provides the Readability of the two 8259A Associated Registers
- Support Serial IRQ
o Three Programmable 16-bit Counters compatible with 8254
- System Timer Interrupt
- Generates Refresh Request
- Speaker Tone Output
- Provides the Readability of the 8254 Associated Registers
o Built-in Real Time Clock(RTC) with 256B CMOS SRAM
- Built-in up to one Month Alarm for ACPI
o Fast PCI IDE Master/Slave Controller
- Bus Master Programming Interface for ATA Windows 95 Compliant
Controller
- Support PCI Bus Mastering
- Plug and Play Compatible
- Support Scatter and Gather
- Support Dual Mode Operation - Native Mode and Compatibility
Mode
- Support IDE PIO Timing Mode 0, 1, 2 ,3 and 4
- Support Multiword DMA Mode 0, 1, 2
- Support Ultra DMA/33
- Two Separate IDE Bus
- Two 16 Dword FIFO for PCI Burst Transfers.
o Universal Serial Bus Host Controller
- OpenHCI Host Controller with Root Hub
- Two USB ports
- Support Legacy Devices
- Support Over Current Detection
o Support I2C Serial Bus
o Support the Reroutibilty of the four PCI Interrupts
o Support 2MB Flash ROM Interface
o Support NAND Tree for ball connectivity testing
o 480-Balls BGA Package
o 0.35μm 3.3V Technology
**5501/5502/5503 Pentium/P54C PCI/ISA Chipset <04/02/95...
**5511/5512/5513 Pentium PCI/ISA <06/14/95...
**5571 (Trinity) Pentium PCI/ISA Chipset (75MHz) <12/09/96...
**5581/5582 (Jessie) Pentium PCI/ISA Chipset (75MHz) <04/15/97...
**5591/5592/5595 (David) Pentium PCI A.G.P. Chipset <01/09/98...
**5596/5513 (Genesis) Pentium PCI Chipset <03/26/96...
**5597/5598 (Jedi) Pentium PCI/ISA Chipset <04/15/97...
**530/5595 (Sinbad) Host, PCI, 3D Graphics & Mem. Ctrl.<11/10/98...
**540 (Spartan) Super7 2D/3D Ultra-AGP Single C.S.<11/30/99...
**55x SoC (System-on-chip) <03/14/02...
**
**Support chips:
**85C206 Integrated Peripheral Controller [no datasheet] ?...
**5595 Pentium PCI System I/O <12/24/97...
**950 LPC I/O <07/16/99...
**Other:...
**PII/III/Pro...
**Athlon etc...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
*ZyMOS...
*General Sources:...
(c) Copyright mR_Slugs Warehouse - All rights Reserved