[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
**82C735 I/O Peripheral Controller With Printgine c:Jul93
***Info:
The CHIPS 82C735 enhanced I/O peripheral controller is a single-chip
solution offering complete I/O capabilities for PC/AT and PC/XT
motherboard applications. The controller is configured via
software. The 82C735 features a floppy disk controller, a digital data
separator, two 16550 compatible UARTs, an enhanced bidirectional
parallel port interface called Printgine, IDE interface control logic,
and a game port chip select. For more information about these
systems, see the Functional Description [see datasheet].
4MB FLOPPY DISK CONTROLLER
The floppy disk controller is software compatible with 765B and 82077
controller functions. It provides a 4MB perpendicular recording format
as well as the standard floppy drive format for 5.25-inch and 3.5-inch
media. The controller supports two drives directly and up to four
drives with an external decoder.
DIGITAL DATA SEPARATOR
The digital data separator is capable of data transfer rates up to
1MB/sec and requires no external components.
NS16550 UARTS AND IDE
The two licensed NS16550 UARTs are improved versions of the NS16450
UARTs. They are provided with individual 16-byte FIFOs to relieve the
CPU of excessive software overhead and are still capable of running
existing 16450 software.
The IDE control logic provides a complete IDE interface for embedded
hard disk drives.
MOUSE PORT LOGIC
The 82C735 controller features optional PS/2 style mouse port logic
with BIOS and driver support. Only one of the UARTs can be used when
the mouse is operational.
PRINTGINE PARALLEL PORT INTERFACE
The parallel port interface, Printgine, is a multiprotocol interface
capable of supporting both unidirectional and bidirectional transfer
modes. It is fully compatible with ISA and PS/2 in the standard modes,
and also supports Microsoft ECP, EPP, and fast Centronics in the
enhanced modes. The output on the control pins switch to become
bidirectional TTL drivers in the fast modes. This makes the port run
faster than is possible with the open-drain drivers provided for the
standard modes.
Printgine provides an economical mechanism for significantly improving
the throughput of an improved parallel port that is upward compatible
with the existing parallel port. The interface can operate in five
different modes: standard (ISA-style unidirectional), bi-di
(PS/2-style bidirectional), Microsoft ECP, EPP, and fast
Centronics. The standard and bi-di modes are compatible with existing
parallel port protocols.
The ECP, EPP, and fast Centronics protocols are enhanced bidirectional
modes that achieve dramatic improvement by implementing the protocols
in hardware. The fast Centronics mode is capable of a data transfer
rate of 200KB/sec, while the ECP and EPP modes are capable of data
transfer rates of 2MB/sec, compared to 15KB/sec in the standard mode.
POWER MANAGEMENT
The 82C735 is provided with several power management features that are
controllable through hardware or software. In hardware, the device
can be completely powered down through a powerdown pin. In this mode,
all inputs are disabled, all outputs are inactive, and the contents of
all registers are preserved (as long as the power supply is
maintained). In software, the device allows each port to be powered
down independently.
***Versions:...
***Features:...
**82C835 Single CHIP 386sx AT Cache Controller c:Apr91...
**F87000 Multi-Mode Peripheral Chip 11/23/93...
**Other:...
**Disk:...
**Video:...
*Contaq . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**450NX (?) 06/29/98:
Chips:
[82454NX] (PXB) [82453NX] (MUX)
[82452NX] (RCG) [82451NX] (MIOC)
[82371EB] (PIIX4E),
CPUs: Single/Dual/Quad P-II Xeon/P-III Xeon
DRAM Types: FPM EDO 2-way Interleave 4-way Interleave
Mem Rows: 8
DRAM Density: 16Mbit 64Mbit
Max Mem: 8GB
ECC/Parity: Both
AGP speed: N/A
Bus Speed: 100
PCI Clock/Bus: 1/3
**????? (Profusion) c:99...
**800 series...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
**5597/5598 (Jedi) Pentium PCI/ISA Chipset <04/15/97
***Info:...
***Configurations:...
***Features:
o Support Intel Pentium CPU and other compatible CPU host bus
at 50/55/60/66/75 MHz
o Support CPU with MMX feature
o Support the Pipelined Address Mode of Pentium CPU
o Support the Full 64-bit Pentium Processor data Bus
o Meet PC97 Requirements
o Integrated Second Level (L2) Cache Controller
- Write Back Cache Modes
- 8 bits or 7 bits Tag with Direct Mapped Cache Organization
- Integrated 16K bits Dirty RAM
- Support Pipelined Burst SRAM
- Support 256 KBytes and 512 KBytes Cache Sizes
- Cache Hit Read/Write Cycle of 3-1-1-1
- Cache Back-to-Back Read/Write Cycle of 3-1-1-1-1-1-1-1
o Integrated DRAM Controller
- Support 6 RAS lines (3 Banks) of FPM/EDO/SDRAM DIMMs/SIMMs
- Support 2Mbytes to 384Mbytes of main memory
- Support Cacheable DRAM Sizes up to 128 MBytes.
- Support 256K/512K/1M/2M/4M/8M/16M/32M x N FPM/EDO/SDRAM DRAM
- Support 64 Mb DRAM Technology
- Support 3.3V or 5V DRAM.
- Supports Symmetrical and Asymmetrical DRAM.
- Support 32 bits/64 bits mixed mode configuration
- Support Concurrent Write Back
- Support CAS before RAS Refresh
- Support Relocation of System Management Memory
- Programmable CAS#, RAS#, RAMWE# and MA Driving Current.
- Fully Configurable for the Characteristic of Shadow RAM (640
KBytes to 1 MBytes)
- Support FPM DRAM 5-3-3-3(-3-3-3-3) Burst Read Cycles
- Support EDO DRAM 5-2-2-2(-2-2-2-2) Burst Read Cycles
- Support SDRAM 6-1-1-1(-2-1-1-1) Burst Read Cycles
- Support X-1-1-1/X-2-2-2/X-3-3-3 Burst Write Cycles
- Support 8 Qword Deep Buffer for Read/Write Reordering, Dword
Merging and 3/2-1-1-1 Post write Cycles
- Two Programmable Non-Cacheable Regions
- Option to Disable Local Memory in Non-Cacheable Regions
- Shadow RAM in Increments of 16 KBytes
o Integrated PMU Controller
- Meet ACPI Requirements
- Support Both ACPI and Legacy PMU
- Support Suspend to Disk
- Support SMM Mode of CPU
- Support CPU Stop Clock
- Support Power Button for ACPI function
- Support Automatic Power Control for system power off function
- Support Modem Ring-in, RTC Alarm Wake up
- Support Thermal Detection
- Support GPIOs, and GPOs for External Devices Control
- Support Programmable Chip Select
o Provides High Performance PCI Arbiter.
- Support up to 4 PCI Masters
- Support Rotating Priority Mechanism
- Hidden Arbitration Scheme Minimizes Arbitration Overhead.
- Support Concurrency between CPU to Memory and PCI to PCI.
o Integrated Host-to-PCI Bridge
- Support Asynchronous and Synchronous PCI Clock
- Translates the CPU Cycles into the PCI Bus Cycles
- Provides CPU-to-PCI Read Assembly and Write Disassembly
Mechanism
- Translates Sequential CPU-to-PCI Memory Write Cycles into PCI
Burst Cycles
- Zero Wait State Burst Cycles
- Support IDE Posted Write
- Support Pipelined Process in CPU-to-PCI Access
- Support Advance Snooping for PCI Master Bursting
- Maximum PCI Burst Transfer from 256 Bytes to 4 KBytes
o Integrated Posted Write Buffers and Read Prefetch Buffers to
Increase System Performance
- CPU-to-Memory Posted Write Buffer (CTMFF) with 8 QW Deep,
Always Sustains 0 Wait Performance on CPU-to-Memory.
- CPU-to-Memory Read Buffer with 4 QW Deep
- CPU-to-PCI Posted Write Buffer(CTPFF) with 8 DW Deep
- PCI-to-Memory Posted Write Buffer(PTHFF) with 8 QW Deep, Always
Streams 0 Wait Performance on PCI-to/from-Memory Access
- PCI-to-Memory Read Prefetch Buffer(CTPFF) with 8 QW Deep
o Integrated Video/Graphics Accelerator
- Support 32-bit PCI local bus standard revision 2.1
- Built-in an enhanced 64-bit BITBLT graphics engine
- Support tightly coupled host interface to VGA to speed up GUI
performance and the video playback frame rate
- Support direct access to video memory to speed up GUI
performance and the video playback frame rate
- Shared System Memory Area 0.5MB, 1MB, 1.5MB, 2MB, 2.5MB, 3MB,
3.5MB, 4MB
- Built-in programmable 24-bit true-color RAMDAC with reference-
voltage generator
- Built-in dual-clock generator
- Built-in monitor-sense circuit
- Built-in Phillips SAA7110/SAA7111, Brooktree Bt815/817/819A
(8 -bit SPI mode 1,2) video decoder interface
- Built-in Standard feature connector logic support
o Integrated PCI-to-ISA Bridge
- Translates PCI Bus Cycles into ISA Bus Cycles
- Translates ISA Master or DMA Cycles into PCI Bus Cycles
- Provides a Dword Post Buffer for PCI to ISA Memory cycles
- Two 32 bit Prefetch/Post Buffers Enhance the DMA and ISA Master
Performance
- Fully Compliant to PCI 2.1
o Enhanced DMA Functions
- 8-, 16- bit DMA Data Transfer
- ISA compatible, and Fast Type F DMA Cycles
- Two 8237A Compatible DMA Controllers with Seven Independent
Programmable Channels
- Provides the Readability of the two 8237 Associated Registers
- Support Distributed DMA
o Built-in Two 8259A Interrupt Controllers
- 14 Independently Programmable Channels for Level- or Edge-
triggered Interrupts
- Provides the Readability of the two 8259A Associated Registers
- Support Serial IRQ
o Three Programmable 16-bit Counters compatible with 8254
- System Timer Interrupt
- Generates Refresh Request
- Speaker Tone Output
- Provides the Readability of the 8254 Associated Registers
o Built-in Keyboard Controller
- Hardwired Logic Provides Instant Response
- Support PS/2 Mouse interface
- Support Hot Key "Wake-up" Function
- Capable of Enable/Disable Internal KBC and PS2 Mouse
o Built-in Real Time Clock(RTC) with 256B CMOS SRAM
- Built-in up to one Month Alarm for ACPI
o Fast PCI IDE Master/Slave Controller
- Bus Master Programming Interface for ATA Windows 95 Compliant
Controller
- Support PCI Bus Mastering
- Plug and Play Compatible
- Support Scatter and Gather
- Support Dual Mode Operation - Native Mode and Compatibility Mode
- Support IDE PIO Timing Mode 0, 1, 2 ,3 and 4
- Support Multiword DMA Mode 0, 1, 2
- Support Ultra DMA/33
- Two Separate IDE Bus
- Two 16 Dword FIFO for PCI Burst Transfers.
o Universal Serial Bus Host Controller
- OpenHCI Host Controller with Root Hub
- Two USB ports
- Support Legacy Devices
- Support Over Current Detection
o Support I2C serial Bus
o Support the Reroutibility of the four PCI Interrupts
o Support 2Mb Flash ROM Interface
o Support Signature Analysis for automatic test for VGA controller
o Support NAND Tree for ball connectivity testing
o 553-Balls BGA Package
o 0.35μm 3.3V Technology
**530/5595 (Sinbad) Host, PCI, 3D Graphics & Mem. Ctrl.<11/10/98...
**540 (Spartan) Super7 2D/3D Ultra-AGP Single C.S.<11/30/99...
**55x SoC (System-on-chip) <03/14/02...
**
**Support chips:
**85C206 Integrated Peripheral Controller [no datasheet] ?...
**5595 Pentium PCI System I/O <12/24/97...
**950 LPC I/O <07/16/99...
**Other:...
**PII/III/Pro...
**Athlon etc...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
*ZyMOS...
*General Sources:...
(c) Copyright mR_Slugs Warehouse - All rights Reserved