[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
**Who made the first chip set?
By the criteria of (2.) in 'Definition of a chip set' many sources
state this to be the Chips and Technologies NEAT chip set. I don't
know why this is stated as it is most definitely incorrect. The CS8221
NEW Enhanced AT (NEAT) chip set consisting of the chips;
82C211/82C212/82C215/82C206 was as far as I can establish, first
released sometime in 1986.
C&T itself have an earlier chip set called the CS8220 PC/AT compatible
Chip Set, and consists of the following chips; 82C201/82C202/
82A203/82A204/82A205. It was first available in OCT-85. (see:C&T>
CS8220>Notes for further info.)
That is, AFAIK, the first motherboard chip set from C&T and AFAIK the
worlds first chip set that meets the criteria of (2.). However C&T did
already have on the market their popular EGA chip set, but that isn't
a motherboard chip set.
By the criteria of (1.), IBM, or Intel, see IBM>PC/XT chip set.
Another pre-'86 chipset is the Faraday FE2010. The datasheet includes
a schematic on the very last page dated 11/22/85. This only indicates
the chip set was on paper at that date. An acutal release date has not
been found.
**Spelling errors/mistyped words...
**Info needed on:...
**A note on VESA support of 486 chipsets....
**Datasheets:...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**800 series
***810 (Whitney) 04/26/99...
***810L (Whitney) 04/26/99...
***810-DC100 (Whitney) 04/26/99...
***810e (Whitney) 09/27/99...
***810e2 (Whitney) 01/03/01...
***815 (Solano) 06/19/00...
***815e (Solano-2) 06/19/00...
***815em (Solano-?) 10/23/00...
***815ep (Solano-3) c:Nov'00...
***815p (Solano-3) c:Mar'01...
***815g (Solano-3) c:Sep'01...
***815eg (Solano-3) c:Sep'01...
***820 (Camino) 11/15/99...
***820e (Camino-2) 06/05/00...
***830M (Almador) 07/30/01...
***830MP (Almador) 07/30/01...
***830MG (Almador) 07/30/01...
***840 (Carmel) 10/25/99...
***845 (Brookdale) 09/10/01...
***845MP (Brookdale-M) 03/04/02...
***845MZ (Brookdale-M) 03/04/02...
***845E (Brookdale-E) 05/20/02...
***845G (Brookdale-G) 05/20/02...
***845GL (Brookdale-GL) 05/20/02...
***845GE (Brookdale-GE) 10/07/02...
***845PE (Brookdale-PE) 10/07/02...
***845GV (Brookdale-GV) 10/07/02...
***848P (Breeds Hill) c:Aug'03...
***850 (Tehama) 11/20/00...
***850E (Tehama-E) 05/06/02...
***852GM (Montara-GM) 01/14/03...
***852GMV (Montara-GM) ???
Chips:
[82852GMV](GMCH) [82801DBM] (ICH4-M)
CPUs: Pentium 4-M, Celeron, Celeron M
DRAM Types: DDR 200/266
Mem Rows: --
DRAM Density: ?
Max Mem: 1GB
ECC/Parity: no
AGP speed: no, Integrated 3D
Bus Speed: 400 MT/s (100 MHz QDR)
PCI Clock/Bus: 1/3 PCI 2.2
***852PM (Montara-GM) 06/11/03...
***852GME (Montara-GM) 06/11/03...
***854 (?) 04/11/05...
***855GM (Montara-GM) 03/12/03...
***855GME (Montara-GM) 03/12/03...
***855PM (Odem) 03/12/03...
***860 (Colusa) 05/21/01...
***865G (Springdale) 05/21/03...
***865PE (Springdale-PE) 05/21/03...
***865P (Springdale-P) 05/21/03...
***865GV (Springdale-GV) c:Sep'03...
***875P (Canterwood) 04/14/03...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
**W83977ATF WINBOND I/O (Multi I/O) <98
***Info:
GENERAL DESCRIPTION
The W83977ATF is an evolving product from Winbond's most popular I/O
chip W83877F --- which integrates the disk drive adapter, serial port
(UART), IrDA 1.0 SIR, parallel port, configurable plug-and-play
registers for the whole chip --- plus additional powerful features:
ACPI, 8042 keyboard controller with PS/2 mouse support, 23 general
purpose I/O ports, full 16-bit address decoding, OnNow keyboard
wake-up, OnNow mouse wake-up, and OnNow CIR wake-up. In addition, the
W83977ATF provides IR functions: IrDA 1.1 (MIR for 1.152M bps or FIR
for 4M bps) and TV remote IR (Consumer IR, supporting NEC, RC-5,
extended RC-5, and RECS-80 protocols).
The disk drive adapter functions of W83977ATF include a floppy disk
drive controller compatible with the industry standard 82077/ 765,
data separator, write pre-compensation circuit, decode logic, data
rate selection, clock generator, drive interface control logic, and
interrupt and DMA logic. The wide range of functions integrated onto
the W83977ATF greatly reduces the number of components required for
interfacing with floppy disk drives. The W83977ATF supports four 360K,
720K, 1.2M, 1.44M, or 2.88M disk drives and data transfer rates of 250
Kb/s, 300 Kb/s, 500 Kb/s,1 Mb/s, and 2 Mb/s.
The W83977ATF provides two high-speed serial communication ports
(UARTs), one of which supports serial Infrared communication. Each
UART includes a 16-byte send/receive FIFO, a programmable baud rate
generator, complete modem control capability, and a processor
interrupt system. Both UARTs provide legacy speed with baud rate up to
115.2k bps and also advanced speed with baud rates of 230k, 460k, or
921k bps which support higher speed modems. The W83977ATF provides
independent 3rd UART(32-byte FIFO) dedicated for the IR function.
The W83977ATF supports one PC-compatible printer port (SPP),
Bi-directional Printer port (BPP) and also Enhanced Parallel Port
(EPP) and Extended Capabilities Port (ECP). Through the printer port
interface pins, also available are: Extension FDD Mode and Extension
2FDD Mode allowing one or two external floppy disk drives to be
connected.
The configuration registers support mode selection, function
enable/disable, and power down function selection. Furthermore, the
configurable PnP features are compatible with the plug-and-play
feature demand of Windows 95TM, which makes system resource allocation
more efficient than ever.
The W83977ATF provides functions that comply with ACPI (Advanced
Configuration and Power Interface), which includes support of legacy
and ACPI power management through SMI or SCI function pins. The
W83977ATF also has auto power management to reduce power consumption.
The keyboard controller is based on 8042 compatible instruction set
with a 2K Byte programmable ROM and a 256-Byte RAM bank. Keyboard BIOS
firmware is available with optional AMIKEY-2, Phoenix MultiKey/42, or
customer code.
The W83977ATF provides a set of flexible I/O control functions to the
system designer through a set of General Purpose I/O ports. These GPIO
ports may serve as simple I/O or may be individually configured to
provide a predefined alternate function.
The W83977ATF is made to fully comply with Microsoft PC97 Hardware
Design Guide. IRQs, DMAs, and I/O space resource are flexible to
adjust to meet ISA PnP requirement. Moreover, W83977ATF is made to
meet the specification of PC97's requirement in the power management:
ACPI and DPM (Device Power Management).
Another benifit is that W83977ATF has the same pin assignment as
W83977AF, W83977F, W83977TF. This makes the design very flexible.
***Versions:...
***Features:...
**
**Disk Controller:
**W83759/A/F/AF Advanced VL-IDE Disk Controller <96...
**W83769 Local Bus IDE Solution <94...
**
**UARTS:
**W86C250A UART (equivalent of INS8C250A) [no datasheet]
**W86C450/P Universal Asynchronous Receiver/Transmitter <Jul89...
**W86C451 I/O controller for IBM PC/AT/XT <Jul89...
**W86C452 I/O controller for IBM PC/AT Jul89...
**W86C456 I/O controller [no datasheet] ?
**W860551/P UART with FIFO and Printer Port Controller <94...
**
**Other:...
*ZyMOS...
*General Sources:...
(c) Copyright mR_Slugs Warehouse - All rights Reserved