[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq  . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**82395SX     Smart Cache                                     12/17/90
***Notes:...
**82396SX     Smart Cache                                     12/17/90...
**82485       Turbo Cache (and 485Turbocache)                      c90...
**82489DX       Advanced Programmable Interrupt Controller    10/12/92...
**82495DX/490DX DX CPU-Cache Chip Set                           <Sep91...
**82495XP/490XP Cache Controller / Cache RAM (for i860)       06/05/91...
**82496/491     Cache Controller / Cache RAM (for P5 Pentium) 03/22/93...
**82497/492   Cache Controller / Cache RAM (for P54 Pentium)    <Nov94...
**82498/493   Cache Controller / Cache RAM (for P54 Pentium)    <Nov94...
**
**Later chipsets (basic spec):
**440 series:...
**450NX  (?)            06/29/98:...
**?????  (Profusion)    c:99...
**800 series...
*Headland/G2...
**HT44          Secondary Cache                                c:Jun92
***Info:
The  HT44 is  a  look-aside write-through,  80486SX,  486DX or  486DX2
secondary cache  controller. It is  packaged in an  inexpensive 84-pin
plastic-leaded chip carrier (PLCC).

Architecture
With  its look-aside architecture,  the HT44  fits beside  the CPU-to-
Memory bus  and not in  the data path.   Therefore, once the  HT44 has
been designed  into a  486 system, it  can be populated  for secondary
cache systems or left vacant for non-secondary cache systems. The HT44
is direct-mapped to the available address space.

Performance
The  HT44  has a  number  of  performance  enhancing features.   These
include zero-waitstate burst line fills  to the 486 on secondary cache
hits, and simultaneous 486 and secondary cache updates on read misses.

Memory Configurations
The HT44 supports  cache sizes from 32KBytes to  1MB. Both synchronous
and asynchronous  SRAMs are supported.  25ns SRAMs are  sufficient for
zero-wait-state operation at 33MHz.

Chip Set Support
The HT44 can,  be implemented with minimal glue logic  in a 486 system
with the  HTK340 (code  name Shasta) chip  set.  The registers  in the
HTK340  allow  for programming  of  non-cacheable and  write-protected
areas of  memory. The  HTK340 will support  the HT44  with synchronous
SRAMs only.   Future Headland chip sets will  support both synchronous
and asynchronous SRAM designs.

The HT44  can also be used  with some third-party  chip sets, however,
additional glue logic may be required.

***Versions:...
***Features:...
**Other:...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
*Symphony...
*TI (Texas Instruments)...
*UMC...
**UM82152      Cache Controller (AUStek A38152 clone)              <91
***Info:
The  UM82152 is a  high-performance cache  controller for  Intel 80386
based   systems  and   provides   high  levels   of  integration   and
functionality.  It interfaces  directly  to the  80386; no  additional
support  logic  is required.   A  complete  32-kilobyte  cache can  be
designed with just one UM82152 and four 8K by 8-bit static RAMs.

The  UM82152 architecture  enables easy  design-in with  current speed
versions  of  the  80386,  and  simple  migration  to  faster  version
processors with no alteration to system or memory design.

The 80386,  operating in  pipelined mode with  the UM82152,  runs with
zero  wait states during  a cache  hit (requested  data is  present in
cache). If  the data is not  present (cache miss), it  is fetched from
main  memory by  the  UM82152.  This  approach  yields the  high-speed
performance  of fast  SRAMs for  code and  data most  frequently used,
while  providing design  economies (such  as board  space  savings and
lower component costs)  by storing infrequently used code  and data in
slower  dynamic RAM (with  cycle times  greater than  125 nanoseconds)
that  can  be  located  in  large  memory  banks  either  on-board  or
off-board.

The reduced system bus  traffic inherent in the UM82152 implementation
produces system performance gains by  freeing the bus for use by other
devices.

***Versions:...
***Features:...
**UM82C852     Multi I/O For XT                                    <91...
**UM82C206     Integrated Peripheral Controller                    <91...
**UM82c45x     Serial/Parallel chips                                 ?...
**Other chips:...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
*ZyMOS...
*General Sources:...