[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**82495XP/490XP Cache Controller / Cache RAM (for i860) 06/05/91
***Notes:...
***Info:...
***Features:...
**82496/491 Cache Controller / Cache RAM (for P5 Pentium) 03/22/93...
**82497/492 Cache Controller / Cache RAM (for P54 Pentium) <Nov94...
**82498/493 Cache Controller / Cache RAM (for P54 Pentium) <Nov94...
**
**Later chipsets (basic spec):
**440 series:...
**450NX (?) 06/29/98:...
**????? (Profusion) c:99...
**800 series...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
**82C895 System/Power Management Controller (cached) c:Sep94
***Notes:...
***Info:
Overview
The 82C895 provides a highly integrated solution for fully compatible,
high performance PC/AT platforms. This chipset will support 486SX/
DX/DX2/DX4 and P24T microprocessors in the most cost effective and
power efficient designs available today. For power users, this
chipset offers optimum performance for systems running up to 50MHz.
Based fundamentally on OPTi's proven 82C801 and 82C802 design
architectures, the 82C895 adds additional memory configurations and
extensive power management control for the processor and other
motherboard components.
The 820895 supports the latest write-back processor designs from
Intel, AMD, and Cyrix, as well as supporting the AT bus and VESA local
bus for compatibility and performance. It also includes an
82C206-compatible Integrated Peripherals Controller (IPC). all in a
single 208-pin PQFP (Plastic Quad Flat Pack) package for low cost.
2.1 Power Management
This block diagram [see datasheet] exemplifies the flexibility of the
82C895/82C602 GREEN strategy. System designs can easily accommodate
both SLe and non-SLe CPUs. If an Intel non-SLe CPU is used, SMI#,
SMIACT#, and FLUSH# are no connects. One design can easily accomm-
odate both types of processors with minimal changes for upgrades.
***Configurations:...
***Features:...
**82C898 System/Power Management Controller (non-cache)c:Nov94...
**
**Support Chips:
**82C601/2 Buffer Devices <Nov94...
**82C822 PCIB (VLB-to-PCI bridge) c:94...
**Other:...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
*Symphony...
*TI (Texas Instruments)...
*UMC...
**UM82C230 286AT MORTAR Chip Set <91
***Info:
The UMC's MORTAR (286AT) Chip Set UM82C230 series provides an economic
alternative for building a reliable IBM PC/AT compatible system. A
commercial 12MHZ/0 wait state, 4MByte main memory system and
math-coprocessor can be easily built by using 3 VLSIs, 8 logic
components plus memory and processor.
The UM82C230 MORTAR chipset consists of the UM82C231 System/Memory
Controller, the UM82C232 Data/Address Buffer and the UM82C206
Integrated Peripherals Controller (IPC).
As shown in the System Block Diagram, [see datasheet] there are three
data buses: local data bus, AT data bus and peripheral data (XD) bus.
The local DRAM, EPROM and Numerical Processor are located on the local
data bus. The UM82C206 and 8042 Keyboard Controller sit on the XD bus.
The AT data bus was driven by the UM82C232 directly which conveys the
data to/from the AT Channel Adaptors.
The address bus architecture is also very simple; local CPU address
bus, local DRAM address bus (MA), peripheral address bus (XA) and AT
address bus. The local address bus is shared between CPU, UM82C231 and
UM82C206. The MA bus is used by the local DRAM only. Most of the
system board devices are attached to the XA bus, like UM82C232,
UM82C206, ROMs and 8042. Some AT address lines are driven by the
UM82C231 or UM82C232 directly; the others are buffered.
The UM82C231 provides synchronization and control signals for all
buses. The UM82C231 also distinguishes if the current cycle is local
memory cycle. Upon detecting that it is a local DRAM cycle, no AT
control signals are sent out to the AT channel. The UM82C231 is based
on the memory configurations to complete the current cycle with
fastest response. If the cycle is AT cycle, the UM82C231 sends out the
control signals sequentially which are then used by the adaptors or
system board devices to receive the write data or to send the fetched
data. Then, depending on the status signals sent back by the adaptors
or system board devices, the UM82C231 determines which kind of AT
cycles to perform: 8-bit, 16-bit, bus conversion, wait state insert,
or wait state cycle.
The UM82C232 Data/Address buffer provides the buffering and latching
between the CPU local data bus, AT bus and XD bus. The parity bit
generation and parity bit checking logic resides in the UM82C232 also.
During DMA cycles, the UM82C232 latches the address from XD, which is
sent by the UM82C206, and transfers to XA bus.
***Configurations:...
***Features:...
**UM82C210 386SX/286 AT Chip Set <91...
**UM82C3xx Twinstar & UM82C336F/N & UM82C39x [no datasheet] ?...
**UM82C380 386 HEAT PC/AT Chip Set <91...
**UM82C480 386/486 PC Chip Set c91...
**UM82C493/491 ??????????????? [no datasheet] ?...
**UM8498/8496 486 VL Chipset "Super Energy Star Green"[no dsheet]c94...
**UM8881/8886 HB4 PCI Chipset "Super Energy Star Green"[no dsheet]c94...
**UM8890 Pentium chipset [no datasheet] ?...
**
**Support Chips:
**UM82152 Cache Controller (AUStek A38152 clone) <91...
**UM82C852 Multi I/O For XT <91...
**UM82C206 Integrated Peripheral Controller <91...
**UM82c45x Serial/Parallel chips ?...
**Other chips:...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
*ZyMOS...
*General Sources:...
(c) Copyright mR_Slugs Warehouse - All rights Reserved