[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq  . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**82395SX     Smart Cache                                     12/17/90
***Notes:...
**82396SX     Smart Cache                                     12/17/90...
**82485       Turbo Cache (and 485Turbocache)                      c90...
**82489DX       Advanced Programmable Interrupt Controller    10/12/92...
**82495DX/490DX DX CPU-Cache Chip Set                           <Sep91...
**82495XP/490XP Cache Controller / Cache RAM (for i860)       06/05/91...
**82496/491     Cache Controller / Cache RAM (for P5 Pentium) 03/22/93...
**82497/492   Cache Controller / Cache RAM (for P54 Pentium)    <Nov94...
**82498/493   Cache Controller / Cache RAM (for P54 Pentium)    <Nov94...
**
**Later chipsets (basic spec):
**440 series:...
**450NX  (?)            06/29/98:...
**?????  (Profusion)    c:99...
**800 series...
*Headland/G2...
**HT44          Secondary Cache                                c:Jun92
***Info:
The  HT44 is  a  look-aside write-through,  80486SX,  486DX or  486DX2
secondary cache  controller. It is  packaged in an  inexpensive 84-pin
plastic-leaded chip carrier (PLCC).

Architecture
With  its look-aside architecture,  the HT44  fits beside  the CPU-to-
Memory bus  and not in  the data path.   Therefore, once the  HT44 has
been designed  into a  486 system, it  can be populated  for secondary
cache systems or left vacant for non-secondary cache systems. The HT44
is direct-mapped to the available address space.

Performance
The  HT44  has a  number  of  performance  enhancing features.   These
include zero-waitstate burst line fills  to the 486 on secondary cache
hits, and simultaneous 486 and secondary cache updates on read misses.

Memory Configurations
The HT44 supports  cache sizes from 32KBytes to  1MB. Both synchronous
and asynchronous  SRAMs are supported.  25ns SRAMs are  sufficient for
zero-wait-state operation at 33MHz.

Chip Set Support
The HT44 can,  be implemented with minimal glue logic  in a 486 system
with the  HTK340 (code  name Shasta) chip  set.  The registers  in the
HTK340  allow  for programming  of  non-cacheable and  write-protected
areas of  memory. The  HTK340 will support  the HT44  with synchronous
SRAMs only.   Future Headland chip sets will  support both synchronous
and asynchronous SRAM designs.

The HT44  can also be used  with some third-party  chip sets, however,
additional glue logic may be required.

***Versions:...
***Features:...
**Other:...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
**82C895         System/Power Management Controller (cached)   c:Sep94
***Notes:...
***Info:
Overview
The 82C895 provides a highly integrated solution for fully compatible,
high performance  PC/AT platforms.   This chipset will  support 486SX/
DX/DX2/DX4  and P24T microprocessors  in the  most cost  effective and
power  efficient  designs  available  today.  For  power  users,  this
chipset offers optimum performance for systems running up to 50MHz.

Based  fundamentally  on  OPTi's   proven  82C801  and  82C802  design
architectures,  the 82C895 adds  additional memory  configurations and
extensive  power  management  control  for  the  processor  and  other
motherboard components.

The  820895  supports the  latest  write-back  processor designs  from
Intel, AMD, and Cyrix, as well as supporting the AT bus and VESA local
bus  for   compatibility  and   performance.   It  also   includes  an
82C206-compatible  Integrated Peripherals Controller  (IPC). all  in a
single 208-pin PQFP (Plastic Quad Flat Pack) package for low cost.

2.1 Power Management

This block diagram [see  datasheet] exemplifies the flexibility of the
82C895/82C602 GREEN  strategy.  System designs  can easily accommodate
both SLe  and non-SLe  CPUs. If  an Intel non-SLe  CPU is  used, SMI#,
SMIACT#, and  FLUSH# are no  connects.  One design can  easily accomm-
odate both types of processors with minimal changes for upgrades.

***Configurations:...
***Features:...
**82C898         System/Power Management Controller (non-cache)c:Nov94...
**
**Support Chips:
**82C601/2       Buffer Devices                                 <Nov94...
**82C822         PCIB (VLB-to-PCI bridge)                         c:94...
**Other:...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
*ZyMOS...
*General Sources:...