[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**82380 32-bit DMA Controller w/ Integrated Peripherals 02/01/87
***Notes:...
***Info:
The 82380 is a multi-function support peripheral that integrates
system functions necessary in an 80386 environment. It has eight
channels of high performance 32-bit DMA with the most efficient
transfer rates possible on the 80386 bus. System support peripherals
integrated into the 82380 provide Interrupt Control, Timers, Wait
State generation, DRAM Refresh Control, and System Reset logic.
The 82380's DMA Controller can transfer data between devices of
different data path widths using a single channel. Each DMA channel
operates independently in any of several modes. Each channel has a
temp orary data storage register for handling non-aligned data without
the need for external alignment logic.
The 82380 contains several independent functional modules. The foll-
owing is a brief discussion of the components and features of the
82380. E$ch module has a corresponding detailed section later in this
data sheet. Those sections should be referred to for design and
programming information.
82380 Architecture:
The 82380 is comprised of several computer system functions that are
normally found in separate LSI and VLSI components. These include: a
high-performance, eight-channel, 32-bit Direct Memory Access Cont-
roller; a 20-level Programmable Interrupt Controller which is a super-
set of the 82C59A; four 16-bit Programmable Interval Timers which are
functionally equivalent to the 82C54 timers; a DRAM Refresh Cont-
roller; a Programmable Wait State Generator; and system reset
logic. The interface to the 82380 is optimized for high-performance
operation with the 80386 microprocessor.
The 82380 operates directly on the 80386 bus. In the Slave mode, it
monitors the state of the processor at all times and acts or idles
according to the commands of the host. It monitors the address
pipeline status·. and generates the programmed number of wait states
for the device being accessed. The 82380 also has logic to reset the
80386 via hardware or software reset requests and processor shutdown
status.
After a system reset, the 82380 is in the Slave mode. It appears to
the system as an I/O device. It becomes a bus master when it is
performing DMA transfers.
To maintain compatibility with existing software, the registers within
the 82380 are accessed as bytes. If the internal logic of the 82380
requires a delay before another access by the processor, wait states
are automatically inserted into the access cycle. This allows the
programmer to write initialization routines, etc. without regard to
hardware recovery times.
***Versions:...
***Features:...
**82380FB/AB PCIset: 82380FB Mobile PCI-to-PCI Bridge(MPCI2) 02/17/97...
**82384 Clock Generator and Reset Interface c86...
**82385 32-bit Cache Controller for 80386 09/29/87...
**82385SX 32-bit Cache Controller for 80386SX 01/25/89...
**82395DX High Performance Smart Cache 06/18/90...
**82395SX Smart Cache 12/17/90...
**82396SX Smart Cache 12/17/90...
**82485 Turbo Cache (and 485Turbocache) c90...
**82489DX Advanced Programmable Interrupt Controller 10/12/92...
**82495DX/490DX DX CPU-Cache Chip Set <Sep91...
**82495XP/490XP Cache Controller / Cache RAM (for i860) 06/05/91...
**82496/491 Cache Controller / Cache RAM (for P5 Pentium) 03/22/93...
**82497/492 Cache Controller / Cache RAM (for P54 Pentium) <Nov94...
**82498/493 Cache Controller / Cache RAM (for P54 Pentium) <Nov94...
**
**Later chipsets (basic spec):
**440 series:...
**450NX (?) 06/29/98:...
**????? (Profusion) c:99
Chips:
Memory Access Controller (MAC)
Data Interface Buffer (DIB)
CPUs: 8x P-III Xeon Oct
DRAM Types: SDRAM PC100 2-way Interleave dual channel
Max Mem: 32GB
ECC/Parity: ECC
AGP speed: N/A
Bus Speed: 100
PCI Clock/Bus: 1/3 PCI-66/64
**800 series...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
**82C898 System/Power Management Controller (non-cache)c:Nov94
***Notes:...
***Info:
Overview
The 82C898 provides a highly integrated solution for fully compatible,
high performance PC/AT platforms. The 82C898 supports 486SX/DX/DX2/DX4
and P24T microprocessors in the most cost effective and power
efficient designs available today. For high-end system applications,
this device offers optimum performance for systems running up to
50MHz.
Based fundamentally on OPTi’s proven 82C801 and 82C802 design
architectures, the 82C898 adds additional memory configurations and
extensive power management control for the processor and other
motherboard components.
The 82C898 supports the latest in write-back processor designs from
Intel, AMD, and Cyrix, as well as supporting the AT bus and VESA local
bus for compatibility and performance. It also includes an 82C206
Integrated Peripherals Controller (IPC), all in a single 208-pin PQFP
(Plastic Quad Flat Pack) for low cost.
Power Management
Figure 2-1 [see datasheet] exemplifies the flexibility of an
82C898/82C602-based designs GREEN strategy. System designs can easily
accommodate both SLe and non-SLe CPUs. If an Intel non-SLe CPU is
used, SMI#, SMIAOT#, and FLUSH# are no connects. One design can easily
accommodate both types of processors with minimal changes for
upgrades.
***Configurations:...
***Features:...
**
**Support Chips:
**82C601/2 Buffer Devices <Nov94...
**82C822 PCIB (VLB-to-PCI bridge) c:94...
**Other:...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
*ZyMOS...
*General Sources:...
(c) Copyright mR_Slugs Warehouse - All rights Reserved