[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**82258 Advanced Direct Memory Access Coprocessor(ADMA) 01/01/84
***Notes:...
***Info:
Intel's 82258, Advanced Direct Memory Access Coprocessor is a high
performance, 16 bit DMA processor optimized for the 80286, 80186 and
the 8086 families of CPUs and compatible with 80386 CPU. It has
on-chip bus interface for the whole 8086 family architecture. Four
high speed, independently programmable DMA channels can achieve a
maximum cumulative transfer rate of 8 MByte/sec in an 8 MHz 80286
system and 4 MByte/sec in 8 MHz 8086/80186 systems. Channel 3 can be
used as a Multiplexor channel, whereby, it supports 32
subchannels. This flexibility allows one to use a single DMA channel
to handle a large number of slow and medium speed I/O
devices. Advanced capabilities like Command and Data chaining and "On
the fly" operations allow the 82258 to remove the I/O management load
from the processor. The 82258 addresses the full 80286 CPU memory (16
MB for 80286), thus simplifying the system design. Automatic
assembly/disassembly of data allows 16 bit processors to interface
with common 8 bit peripherals and vice-versa. Remote mode of
operation, where the 82258 has its own resident bus, allows modular
system design. The 82258 complements the high performance,
multitasking capabilities of the 80286.
***Versions...
***Features:...
**82335 High-Integration Interface Device For 386SX c:Nov88...
**82360SL I/O Subsystem 10/05/90...
**82370 Integrated System Peripheral (for 82376) c:Oct88...
**82371FB/SB PCI ISA IDE Xcelerator 82371FB/82371SB (PIIX/3) 01/31/95...
**82371MX Mobile PCI I/O IDE Xcelerator (MPIIX) 11/01/95...
**82371AB PCI-TO-ISA / IDE Xcelerator 82371AB (PIIX4) 02/17/97...
**82374/82375 PCI-EISA Bridge (82374EB/82375EB, 374SB/375SB) c:Mar93...
**82378 System I/O (SIO) (82378IB and 82378ZB) c:Mar93...
**82379AB System I/O-APIC (SIO.A) <Dec94...
**82380 32-bit DMA Controller w/ Integrated Peripherals 02/01/87...
**82380FB/AB PCIset: 82380FB Mobile PCI-to-PCI Bridge(MPCI2) 02/17/97...
**82384 Clock Generator and Reset Interface c86...
**82385 32-bit Cache Controller for 80386 09/29/87...
**82385SX 32-bit Cache Controller for 80386SX 01/25/89...
**82395DX High Performance Smart Cache 06/18/90...
**82395SX Smart Cache 12/17/90...
**82396SX Smart Cache 12/17/90...
**82485 Turbo Cache (and 485Turbocache) c90...
**82489DX Advanced Programmable Interrupt Controller 10/12/92...
**82495DX/490DX DX CPU-Cache Chip Set <Sep91...
**82495XP/490XP Cache Controller / Cache RAM (for i860) 06/05/91
***Notes:...
***Info:...
***Features:...
**82496/491 Cache Controller / Cache RAM (for P5 Pentium) 03/22/93...
**82497/492 Cache Controller / Cache RAM (for P54 Pentium) <Nov94...
**82498/493 Cache Controller / Cache RAM (for P54 Pentium) <Nov94...
**
**Later chipsets (basic spec):
**440 series:...
**450NX (?) 06/29/98:...
**????? (Profusion) c:99...
**800 series...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
**SL6012 Memory Mapper for PC-AT (74LS612 compatible) <Jul87
***Info:
The SL6012 Memory Mapper is intended for use in PC-AT design. It can
expand an address bus by 4 bits. In PC-AT applications, 4 bits of the
source address are used to select 1 of 16, eight bit map
registers. These registers are normally programmed (through software)
with the starting address of each memory page. The register data is
output directly for use as the most significant bits of the expanded
address bus. The 8 bits from the SL6012 are used along with the unused
source address bits to form the expanded address bus.
As shown in Table 1 [see datasheet], the SL6012 has three modes of
operation; read, write and map. Data may be written into, or read from
the Memory Mapper when chip select CSN is low. The register select
inputs (RS0 through RS3) select one of the sixteen map registers. When
RWN is low, data is written into a register from the data bus. When
RWN is high data is output from a Memory Mapper register to the data
bus.
The map mode of operation is selected when chip select CSN is high. In
this mode, the register data selected by the map address inputs (MA0
through MA3) will be available on the map outputs (MO0 through
MO7). Note that the map registers are addressed by either the RS
inputs or the MA inputs depending upon the operating mode. When MEN
(Map Enable) is low the map outputs (MO0-MO7) are active. When MEN is
high, the map outputs are at high impedance.
***Versions:...
***Features:...
**SL9010 System Controller (80286/80386SX/DX, 16/20/25MHz) <oct88...
**SL9020 Data Controller <oct88...
**SL9025 Address Controller <oct88...
**SL9090 Universal PC/AT Clock Chip <oct88...
**SL9250 Page Mode Memory Controller (16/20MHz 8MB Max) <oct88...
**SL9350 Page Mode Memory Controller (16/20/25MHz 16MB Max) <oct88...
**Other:...
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
*ZyMOS...
*General Sources:...
(c) Copyright mR_Slugs Warehouse - All rights Reserved