; CARDWARE.INI
;
; Cogent Data Technologies, v. 1.0 (940325)
;
; This file is used by CardWare for maintaining
;     information required for using PC Cards
;
; See the CWINI.TXT file for a description of the
;     entries in the file

[Resources]
MEM=0xCF000,0x1000,E    ; The first 4kB of the memory are used by CardWare internally!!!
MEM=0xD0000,0x10000,E   ; reserve for other adapters 
I/O=0x140,0x20,E,10     ; normally not used
I/O=0x220,0x20,E,10     ; reserved
I/O=0x300,0x20,E,10     ; prototype card
I/O=0x370,0x20,E,10     ; secondary disk controller
IRQ=4,E

[Cards]
NumberOfRecords=1
1=Cogent EM595 Ethernet Adapter, 15, 6, 285,Cogent,EM595 Ethernet Adapter

[SpecificAssociations]
NumberOfRecords=1
1=6

[GenericCards]
NumberOfRecords=2
1=Generic Modem,    1,2
2=Generic ATA Disk, 1,4

[GenericAssociations]
NumberOfRecords=2
1=1, 2, 3, 4
2=5

[LogicalDevices]
NumberOfRecords=6
;name,      memBase, memSize, IOBase, IOSize, IRQ, IO2Base, IO2Size, Type, mem2Base, mem2Size, flags
1=COM1,            ,        ,  0X3F8,   0X08,   4,        ,        ,    0,         ,         , 2
2=COM2,            ,        ,  0x2F8,   0X08,   3,        ,        ,    0,         ,         , 2
3=COM3,            ,        ,  0x3E8,   0X08,   4,        ,        ,    0,         ,         , 2
4=COM4,            ,        ,  0x2E8,   0X08,   3,        ,        ,    0,         ,         , 2
5=ATA,             ,        ,       ,   0x10,    ,        ,        ,    3,         ,         , 3
6=LAN,             ,        ,       ,   0X10,    ,        ,        ,    1,         ,         , 0

[Notification]          ; How CardWare handle event notifications
0=0, 0, 0, 0,No Sound Set,
1=0, 0, 0, 0,No Sound Set,
2=0, 0, 0, 0,No Sound Set,
3=0, 0, 0, 0,No Sound Set,
4=0, 0, 0, 0,No Sound Set,
5=0, 0, 0, 0,No Sound Set,
6=0, 0, 0, 0,No Sound Set,

[Socket_Mapping]        ; Mapping of physical socket to the
0=0                     ;   picture displayed by PCCARD
1=1
2=2
3=3

[Socket_Names]          ; Description names for physical sockets
0=Socket A
1=Socket B
2=Socket C
3=Socket D

[Socket_Size]           ; Size of logical socket displayed by PCCARD :
0=0                     ;   0 = Type II, 1 = Type III
1=0
2=0
3=0

[Options]
DOSBeep=1