| Menu Item | Options | Description |
|---|---|---|
| OnBoard Sound Chip | Enabled Disabled |
Enables/disables the on-board audio controller component. |
| OnBoard FDC | Auto Disabled Enabled |
Enables/disables the on-board Floppy Disk Controller. |
| OnBoard Serial Port A OnBoard Serial Port B |
Auto Disabled 3F8h 2F8h 3E8h 2E8h |
Enables/Disables/Selects the address for the on-board serial ports. |
| SINB/SOUTB. IRRX/IRTX |
Selects the IR I/O pin location. | |
| Serial Port B Mode | Normal IrDA Ask IR |
Selects the operational mode for Serial Port B (when enabled). |
| IR Duplex Mode | Enabled Disabled |
Enables/disables duplex mode for IrDA (when enabled). |
| IrDA Protocol | Selects the protocol to be used for IrDA functions. | |
| OnBoard Parallel Port | Auto Disabled 378 278 3BC |
Enables/Disables/Selects the address for the on-board parallel port. |
| Parallel Port Mode | Normal Bi-dir EPP ECP |
Selects the operating mode for the on-board parallel port. |
| EPP Version | 1.9 1.7 |
Selects the version of EPP support (when enabled). |
| Parallel Port IRQ | 7 5 |
Selects which available IRQ will be used by the parallel port. |
| Parallel Port DMA Channel | 0 1 3 |
Selects the DMA channel to be used by the parallel port (Only available in ECP Mode). |
| OnBoard IDE | Both Primary Secondary Disabled |
Enables/disables one or both on-board IDE connectors. |
| Hard Disk Delay Time | Disabled 3 sec. 6 sec. 9 sec. 12 sec. 15 sec. 21 sec. 30 sec. |
Sets the hard disk predelay time, allowing the hard drive(s) to spin up prior to being accessed by CMOS. |