| Menu Item | Options | Description |
|---|---|---|
| Serial port A: Serial port B: |
Auto Disabled Enabled |
Allows the user to Enable/Disable the external serial port, and define its address and IRQ. |
| Mode: | Normal | Defines the operational mode for Serial port B. |
| Parallel port: | Enabled Disabled Auto |
Allows the user to Enable/Disable the parallel port, and define its address and IRQ. |
| Mode: | Bi-Directional EPP ECP Output Only |
Defines the operational mode for the parallel port. |
| Base I/O: | Allows the user to set the base I/O address for the parallel port. | |
| Interrupt: | IRQ7 IRQ5 |
Allows the user to select which of the available interrupts should be reserved for the parallel port. |
| Floppy disk controller: | Enabled Disabled |
Allows the user to Enable or Disable the on-board Floppy drive controller. |
| IDE controller: | Both Disabled Primary Secondary |
Allows the user to select which IDE controller is used. |
| Audio: | Enabled Disabled |
Allows the user to Enable or Disable the on-board audio drive controller. |
| Legacy USB Support: | Disabled Enabled |
Allows the user to Enable or Disable the on-board USB controller. |