NOTE: 1. Use SETUP.COM to get into setup.
2. These are examples only; actual configuration may vary.
3. The 3rd screen (Setup 82C605) is only available when the chip is installed.
PAGE 1 OF 2 ╔══════════════════════════════════════════════════════════════════════╗ ║ ║ ║Following list is the present specification: ║ ║ ║ ║ 1. Current Date is...........03:30:1989 ║ ║ 2. Current Time is...........18:26:34 ║ ║ 3. Diskette Drive A is.......High Capacity ║ ║ Diskette Drive B is.......1.44 M ║ ║ 4. Fixed Disk Drive C is.....Type 14 ║ ║ Fixed Disk Drive D is.....Not Installed ║ ║ 5. Base Memory Size is.......640 Kbytes ║ ║ 6. Extended Memory Size is...1024 Kbytes ║ ║ 7. Primary Display is ║ ║ attached to:...Color Display (80 Column) ║ ║ 8. setup NEAT chips ║ ║ 9. setup 82C605 ║ ║ ║ ║If the parameter is correct, press <Enter> ║ ║If any item will be changed, please press <item number>. ║ ║? ║ ║Press <F1> for HELP!!! ║ ╚══════════════════════════════════════════════════════════════════════╝ PAGE 2 OF 2 ╔══════════════════════════════════════════════════════════════════════╗ ║ ║ ║DRAM TYPE BIOS SHADOW RAM Disable ║ ║ ║ ║ for BANK 0/1 1 Mbit VIDEO SHADOW RAM Disable ║ ║ for BANK 2/3 None ║ ║ 640KB-1MB RELOCATE Disable ║ ║MEMORY BANK ║ ║ EMS MEMORY Disable ║ ║ for BANK 0/1 2 Bank EMS BASE ADDRESS D000H ║ ║ for BANK 2/3 None EMS MEMORY SIZE 1 Mbyte ║ ║ for 4 WAYS Disable EMS PAGE 1 0 Mbyte to 2 Mbyte ║ ║ EMS PAGE 2 0 Mbyte to 2 Mbyte ║ ║ EMS PAGE 3 0 Mbyte to 2 Mbyte ║ ║ EMS PAGE 4 0 Mbyte to 2 Mbyte ║ ║ EMS I/O ADDRESS 208H/209H ║ ║ ║ ║512-640KB ADDRESS MAP ON BOARD ║ ║ ║ ║ Press <Esc> to exit. Press <Up & Dn> to move the ║ ║ cursor. Press <left & right> to change the value ║ ║WARNING !!! Do not change above values unless you know the reason. ║ ╚══════════════════════════════════════════════════════════════════════╝ SETUP 82C605 ╔══════════════════════════════════════════════════╗ ║ **** COM1 PORT 3F8H**** Enable ║ ║ ║ ║ FORCE CTS TRUE Disable ║ ║ FORCE DSR TRUE Disable ║ ║ FORCE DCD TRUE Disable ║ ║ ║ ║ **** COM2 PORT 2F8H**** Enable ║ ║ ║ ║ FORCE CTS TRUE Disable ║ ║ FORCE DSR TRUE Disable ║ ║ FORCE DCD TRUE Disable ║ ║ ║ ║ **** PRINT PORT**** Enable ║ ║ ║ ║ I/O ADDRESS 0378H ║ ║ FUNCTION FOR Normal ║ ║ ║ ║ Press <Esc> to exit, press <Up & Dn> to move ║ ║ the cursor, press <Left & Right> to change ║ ║ the value. ║ ║ ║ ║ WARNING !!! Do not change above values unless ║ ║ you know the reason. ║ ╚══════════════════════════════════════════════════╝