Deskpro 386/25

Document Number: 107315-025, Volume 1
Publication Date: January 1996

System Boards AssemblySpare Part
386 System000944/ 001056
001069/001118
115526-001

SW1 Switch Settings (System Board 000944, 001056, 001069, & 001118)
12 34 56 78 Function
ON Reserved
OFF* 387 coprocessor not installed
ON 387 coprocessor installed
OFF* Cachable mem 0 - 16MB
ON Cachable mem 0 - 12MB
ON* CPU boot speed 25 MHz except 8 MHz when accessing diskette drive
OFF CPU boot speed 25 MHz
OFF Reserved
ON* Compaq VDU, EGA, RGBI or VGC
OFF Third-party monochrome
(MDA only)
ON*

OFF

OFF

ON*

OFF

ON

640 KB base memory

256 KB base memory

512 KB base memory

* Default.

Jumper Settings (System Board 000944, 001056, 001069, & 001118)
Jumper E14Location Function
1 - 2 *Pins closest to 50 MHz crystal 25 MHz processor speed

8.33 MHz bus speed

2 - 3Pins closest to 48 MHz crystal 24 MHz processor speed

8.00 MHz bus speed

* Default.

Memory Boards AssemblySpare Part
1 MB System Memory 000752/001103113224-001
4 MB System Memory 000765113222-001
4 MB Memory Module 000758/000993
001166-001/002
113226-001
1 MB Memory Module 000762/000981
001076
001151-001
001256/001259
113225-001

Controller Boards AssemblySpare Part
Tape Adapter *000774 113259-001
Multipurpose Hard Drive * 000957115511-001
Multipurpose ESDI Board 000996115519-001
ESDI External 300/600 * 001091115839-001
15 MHz ESDI Controller * 001628/001283121667-001
ESDI/Diskette Controller * 001472115374-001
* See Volume 2 Appendix, Multiproduct Boards, for settings.

SW500 Settings
Multipurpose ESDI Hard Drive Controller Board (000996)
12 34 56 Function
OFF* Primary diskette and Hard Drive address select (3FX and 1FX)
ON Secondary diskette and Hard Drive address select (37X and 17X)
OFF* Enable Hard Drive
ON Disable Hard Drive
OFF* OFF* Serial interface COM1 IRQ4
ON OFF Serial interface COM2 IRQ3
ON ON Disable serial interface
OFF*ON* Select printer interface LPT1
ONOFF Select printer interface LPT2
OFFOFF Select printer interface LPT3
ONON Disable printer interface
* Default.

Jumper Settings

Multipurpose ESDI Hard Drive Controller Board (000996)

JumperSetting Function
J11-2 ESDI = IRQ 12
3-4 * ESDI = IRQ 14
5-6 ESDI = IRQ 15
J21-2 * Printer = IRQ 7
3-4 Printer = IRQ 5
* Default.

Video Boards AssemblySpare Part
Video Display Unit (VDU) *** 000031/000160
000345
101340-001
Video Display Unit (VDU) *** 000525101340-001
Video Graphics Controller Board (VGC) * ** *** 000806/001241
109360
109253-001
Advanced Graphics 1024 *** 109958114201-001
Advanced Graphics Memory 109959114202-001
QVision 1024/I Controller Board *** 002163126655-001
* VGC requires system ROM K.2 or later.
** Required for the Advanced Graphics Color Monitor to display both normal VGA and high-resolution video (single-monitor configuration).
*** See Volume 2 Appendix, Multiproduct Boards, for settings.

Miscellaneous AssemblySpare Part
Serial/Parallel Interface * 000570106886-001
Serial/Parallel Interface * 000990106886-001
2400 Baud Internal Modem 001070Not Available
9600/2400 Fax Modem ** --197458-001
* See Volume 2 Appendix, Multiproduct Boards, for settings.
** See Volume 2 Appendix, Modem Configuration Information.

Hard Drives
Size Type Interleave IntegratedMin ROM Spare Part Controller Assembly
60 MB 1 472:1 YK.2 Not Available000957
60 MB47 1:1Y K.2Not Available 000957
84 MB27 1:1Y K.2Not Available 000957
100 MB45 1:1Y K.2142365-0013 000957
110 MB33 1:1Y K.2Not Available 000957
120 MB50 1:1Y N.1136918-0013
111910-0014
000957
300 MB 1 381:1 NK.2 Not Available3
111914-0014, 5
111915-0014, 6
000996
320 MB28 1:1Y K.2111918-0014 000996
340 MB 1,2 281:1 YK.2 194525-0013, 7 000996
Hard Drive Expansion Unit (300-/650-MB) --------001091
001283
001472
001628
--
1 Requires MS-DOS 3.3 or later.
2 Formats to 319 MB
3 Except Europe 4 Europe only
5 Black bezel
6 Gray bezel
7 Contains IDE interface hard drive. If system has two ESDI hard drives, is used in an Expansion Unit, or with the Advanced ESDI Controller (WD1009), order 115182-001 hard drive kit.

Tape DrivesSpare Part Tape Cartridge Spare Part
40 MB108081-001 (black bezel) 40 MB (DC2000)108142-001
120330-001 (gray bezel)
135 MB113218-001 (black bezel) 135 MB (DC600 XTD) 113234-001
113227-001 (gray bezel)
150/250 MB115368-001 (black bezel) 150 MB (DC600 XTD) 113234-001
115367-001 (gray bezel) 250 MB (DC6250)115298-001

Diskette Drives Spare Part
360 KB102928-001 (black bezel)
120329-001 (gray bezel)
1.2 MB102775-001 (black bezel)
120331-001 (gray bezel)
1.44 MB *113263-001 (black bezel)
113264-001 (gray bezel)
* Requires MS-DOS Version 3.31 Revision A if installed as drive B, and MS-DOS Version 3.31 Revision B if installed as drive A.

CablesUsed With Spare PartDescription
Diskette/Tape Signal1 All Diskette Drives
40-MB Tape
101380-002--
Tape Signal 135- and 150-/250-MB Tape Drives 113198-001--
Mass Storage Power1 All Diskette Tape and Hard Drives 101137-001--
Hard Drive Signal1 60-,84- and 110-MB Hard Drives 108086-001--
Hard Drive Signal1 60-,84- and 110-MB Hard Drives (Dual Drives) 108087-001--
Hard Drive Signal Cable 2 300-MB Hard Drives 100625-005
100625-006
34 Pin
20 Pin
External I/O Cable Expansion Unit115810-001 --
VGA Pass-ThroughAdvanced Graphics 114229-001--
Telephone Cable3 Modem112666-001 --
1 Part of kit 108146-001.
2 Part of kit 108249-001.
3 U.S. and Canada only.

Processor/Coprocessor Locations
PartLocation
Processor (386-25) U72
Coprocessor (387-25) U73
Weitek 3167 Coprocessor U57
Cache (82385-25)U59

System ROM Locations
U10 ODDU2 EVEN

System ROM Revisions (Spare Part 108283-001)
RevisionNumber on ODD ROM Number on EVEN ROM
K.2109591-003 109592-003
M.1109591-004 109592-004
N.1109591-005 109592-005

Power Supply/Battery Spare Part
Power Supply108065-001 - 110 V
120161-001 - 220 V
Battery160272-001

Home Page Search Table of Contents Help Comments

Compaq Online

© Copyright 1994, 1995, 1996 Compaq Computer Corporation.
Revised: 06 September 1996