12 MHz Deskpro 286

Document Number: 107315-025, Volume 1
Publication Date: January 1996

SERVICE SUPPORT DISCONTINUED

System Boards AssemblySpare Part
80286 System Board 000555, 000700Not Available

80286 System Board SW1 Switch Settings (000555, 000700)
12 34 56 78 Function
ON 64K x 1 DRAM
OFF 256K x 1 DRAM (default)
ON ON Disable RAM and ROM
ON OFF 0 - 256 KB base memory
OFF ON 0 - 512 KB base memory
OFF OFF Enable all base memory (default)
OFF OFF 64K x 1 DRAM
100 ns (or faster) ONON 256K x 1 DRAM. No extended memory (default)
256Kx1 chips ONOFF Enable bank 2 for 1.0 to 1.5 MB of memory
OFF ON Enable banks 2 and 3 for 1.0 to 2.0 MB of memory
OFF OFF Enable all banks for 1.0 to 2.5 MB of memory
OFF CPU boot speed 12 MHz (default)
ON CPU boot speed 8 MHz
OFF Reserved
ON Compaq VDU and EGA, compatible EGA, RGBI, or VGC/VGA (default)
OFF Third party monochrome (MDA only)

80286 System Board Jumper Settings (000555, 000700)
Jumper E5Function
1 - 2CPU boot speed 12 MHz
2 - 3CPU boot speed 12 MHz except 8 MHz when accessing diskette drive (default)

Memory Boards AssemblySpare Part
512/2048 KB Memory Expansion Board 000307, 000308Not Available
* See Volume 2 Appendix, Multiproduct Boards, for settings.

Memory ChipsSpare Part
256K x 1 (100 ns) DRAMNot Available

Controller Boards AssemblySpare Part
Hard Drive Controller Board * WD1002WAH102778-001
ESDI Hard Drive Controller Board (3:1) * WD1005WAHNot Available
ESDI 130/300 MB Hard Drive Controller Board (1:1) * WD1007AWAHNot Available
Tape Adapter Board (135 MB and 150/250 MB Tape Drive) * 000774113259-001
Multipurpose Hard Drive Controller Board * 000815Not Available
ESDI External 300/600 MB Hard Drive Controller Board * 001091115839-001
15 MHz ESDI Controller Board * 001283, 001628121667-001
ESDI/Diskette Controller Board * 001472115374-001
* See Volume 2 Appendix, Multiproduct Boards, for settings.

Video Boards AssemblySpare Part
Enhanced Color Graphics Board (EGA/CECGB) * *** 000410Not Available
Enhanced Color Graphics Board (EGA/CECGB) * *** 000471109196-001
Video Display Controller Board (VDU) *** 000031, 000160, 000345, 000525 101340-001
Video Graphics Controller Board (VGC/VGA) * ** *** 000806, 001241, 109360 109253-001
Advanced Graphics 1024 Board (AG1024) *** 109958114201-001
Advanced Graphics Memory Board 109959114202-001
* ECG and VGC require system ROM K or later.
** Required for the Advanced Graphics Color Monitor to display both normal VGA and high resolution video (single monitor configuration).
*** See Volume 2 Appendix, Multiproduct Boards, for settings.

Miscellaneous AssemblySpare Part
Serial/Parallel Interface Board * 000570, 000990106886-001
2400 Baud Internal Modem 001070Not Available
* See Volume 2 Appendix, Multiproduct Boards, for settings.

Hard Drives
SizeType Interleave Integrated Minimum ROMSpare Part Controller Assembly
20 MB2 1:1Yes KNot Available 000815
20 MB2 3:1Yes KNot Available 000815
40 MB17 3:1Yes KNot Available 000815
40 MB ***17

22

1:1Yes K

R.2

Not Available000815
40 MB ***43 1:1Yes KNot Available 000815
70 MB12 2:1No KNot Available WD1002WAH
130 MB ****25

35 *****

3:1

1:1

NoK Not AvailableWD1005WAH, WD1007AWAH
Hard Drive Expansion Unit ---------- 001091, 001283, 001472, 001628
*** Requires MS-DOS 3.2 or later.
**** Came formatted as type 35 for the WD1007AWAH controller. If used with the WD1005WAH controller (type 25), you must perform an unconditional format followed by a surface analysis using Diagnostics 5.04 or greater.
***** MS-DOS 3.1 or earlier supports type 25 only. MS-DOS 3.2 or later supports either type. Use type 25 if the application software supports only 17 sectors per track.

Tape DrivesSpare Part Tape Cartridge Spare Part
40 MB108081-001 (black bezel) 120330-001 (gray bezel) 40 MB (DC2000)108142-001
135 MB113218-001 (black bezel) 113227-001 (gray bezel) 135 MB (DC600XTD) 113234-001
150/250 MB115368-001 (black bezel) 115367-001 (gray bezel) 150 MB (DC600XTD) 250 MB (DC6250) 113234-001 115298-001

Diskette Drives Spare Part
360 KB102928-001 (black bezel)

120329-001 (gray bezel)

1.2 MB102775-001 (black bezel)

120331-001 (gray bezel)

1.44 MB *113263-001 (black bezel)

113264-001 (gray bezel)

* Requires system ROM N.3 or later for use with MS-DOS and system ROM P.1 or later for use with MS OS/2 Version 1.1. Requires MS-DOS Version 3.31 Revision A if installed as drive B, and MS-DOS Version 3.31 Revision B if installed as drive A.

Cables
Cable Function Used WithSpare Part Description
Diskette/Tape Signal * All Diskette Drives

40 MB Tape Drive

101380-002--
Mass Storage Power * All Drives101137-001 --
Tape Signal135 MB Tape Drive

150/250 MB Tape Drive

113198-001

115196-001

--
Hard Drive Signal70 MB Hard Drive 100625-003 100625-004 34 Pin
20 Pin
Hard Drive Signal * 20 MB Hard Drive

40 MB Hard Drive

108086-001--
Hard Drive SignalDual 20 MB & 40 MB Hard Drives 108087-001--
Hard Drive Signal ** 130 MB Hard Drive100625-005 100625-006 34 Pin
20 Pin
External I/OExpansion Units 115810-001 100625-006 34 Pin
20 Pin
Telephone Cable (U.S. and Canada) Modem112666-001 --
VGA Pass ThroughAdvanced Graphics System 114229-001--
* Part of Cable Kit 108146-001.
** Part of Cable Kit 108249-001.

Processor/Coprocessor Locations
PartLocation
80286-12 Processor U3
80287-8 Coprocessor U17

System ROM Information
System ROM Location System Option ROM Location
U92 ODD, U49 EVENU116 ODD, U75 EVEN

System ROM Revisions (Spare Part 105035-001)
RevisionPN on ODD ROM PN on EVEN ROM
K106778-002 106779-002
M106970-001 106971-001
N.3106970-002 106971-002
P.1109739-001 109740-001
R.2109739-002 109740-002
S.1109739-003 109740-003

Power Supply/Battery Spare Part
Power Supply108065-001
Lithium Battery160272-001

Home Page Search Table of Contents Help Comments

Compaq Online

© Copyright 1994, 1995, 1996 Compaq Computer Corporation.
Revised: 06 September 1996