This information was extracted from a Windows .hlp file, X_RACK.HLP. Typographical errors have been left in this extracted version.
-mr_slug
Contents
XpressRACK
July Updates
Intel Product Update Bulletin (iPAN)
Product History
Orderable Spare Parts List
General Product Information
Certifications
Known Errata
Technical Product Summary
General Description
Dimensions
Environmental Specifications
Power Supply
Product Codes
Support Services
Complete Product Support Services Now Available to ALL Intel Platform Customers
July Updates
This update was released July 15, 1994.
· Updated System Product History with label addition and module support bracket
· Updated Orderable Spare Parts list withe new module support bracket
· formatting clean-up
Product History
XpressRACK products will always ship with the current revision of motherboard, ECU, and BIOS available. Please see the Xpress Helpfile for the complete board, ECU, and BIOS history.
Related Topics:
System History
System History
Module Support Rail, est July
Intel Inside Labels, est July
New Manual, New Software Kit, May
Improve Speaker Mounting pattern, Nov
Manual Addition Sept 92
Original Release of Product, Jul
Module Support Rail, est July 94
A very minor change was made to the black plastic support rail which hold the CPU module. The edges were beveled to ease installation and increase board clearance. The new part number is 515524-004.
Intel Inside Labels, est July 94
Two Intel Inside Logos were added to the product. One approximately 1-inch label will be applied to the bezel in the upper left hand corner. On the shipping container, one approximately 3½-inch label will be placed near one of the two product code labels.
New Manual, New Software Kit, May 93
Updated the manual and software kit.
ECO Number 2157149
Improve Speaker Mounting pattern, Nov 92
Minor modifications were made to the speaker mounting pattern, and a bracket was added to improve the retention of the speaker during shipments.
ECO Number 2157135
Manual Addition Sept 92
Added Xpress manual to shipping container.
ECO Number 2157124
Original Release of Product, Jul 92
ECO Number 2157121
Orderable Spare Parts List
Spare Part Kit for XpressRack, 8 slot
BXBASE8E8 Baseboard, 8 slot, 8MB
201321-001 Power Supply, 396 Watt
456298-001 Cable, floppy signal
473094-001 Cable, IDE
515524-004 Support Rail, Module
473141-001 Cable, Controller
471640-001 Fan Assy
473143-001 Display LCD Assy
473092-002 Load resistor, Assy
Spare Part Kit for XpressRack, 6 slot
BXBASE6E4 Baseboard, 6 slot, 4MB
200903-002 Power Supply, 300 Watt
456298-001 Cable, floppy signal
473094-001 Cable, IDE
515524-004 support Rail, Module
473090-001 Cable, Controller, 6 slot
471640-001 Fan Assy
Certifications
Safety |
|
|
U.S. | UL 478 4th Edition | Listed |
Canada | CSA C 22.2 No. 950 | Certified |
Europe | GS License EN 60950 | Certified |
EMI/RFI |
|
|
U.S. | FCC CFR 47 Part 15, Subpart B, Class A | Verified |
Europe | VDE Class A 0871/6.78 | Verified |
| CISPR22 Class A | Verified |
Japan | VCCI, Class 2 | Verified |
Related Topics:
Novell Certifications
Novell Certifications
Certification for XpressRACK 8 Slot
Certification for XpressRACK 6 Slot
Certification for XpressRACK 8 Slot
NOVELL
(This certificate can be obtained through Intel FaxBACK document 4213)
XpressRACK 8 Slot 50MHz i486DX F-1449
by Intel Corporation 05 JAN 1993
Tested and Approved NetWare compatible as a File Server/Workstation with the following Novell products:
NetWare (v2.2)
NetWare (v3.11)
NetWare Lite (v1.0)
NetWare for Macintosh (v2.2)
NetWare for Macintosh (v3.01)
NetWare 3270 LAN Workstation (v2.0)
NetWare Btrieve (v5.15)
NetWare SQL (v2.11a)
NetWare SAA Token-Ring (v1.1)
Novell Print Server (v1.21)
NetWare Access (v1.22)
OnLAN/PC (v1.22)
NetWare Link/64 (v1.1)
NetWare Link/X.25 (v1.00)
NetWare Asynchronous Communications Server (v3.0)
Test Configuration:
Product Name/Model/Rev: XpressRACK 8 slot 50MHz i486DX / 486 DX50
CPU Family/Clock Speed: 80486DX/50 MHz
Controller(s)/Fixed Disk(s): DPT PM2012B/90 [BIOS 003.F]
Two SCSI (535 Megabytes) Maxtor LXT535SY
Bus Type: EISA (Eight 32-bit slots)
ROM BIOS Version: PhoenixBIOS(TM) E486 Version 1.00.04.V0
Main/CPU Board Revision: PBA 517903-006 / PBA 517684-005
CPU Memory: Base 640 Extended 7168
Video Adapter: VGA
Vendor Software: MS DOS (5.0), MS Windows (3.0)
Configuration Utility: !INT3081.CFG (18 FEB 1992 10:07AM 7456 bytes)
Configuration Notes:
Does not support NetWare Asynchronous Remote Router (v1.2a)
A DPT PM2012B/95 [BIOS 001.H] was used to test NetWare 2.2 in the dedicated server mode.
In this same configuration non-dedicated NetWare 2.2 is not supported because the disk driver PM12NW2.OBJ, dated 16 June 1991, does not support non-dedicated NetWare.
The term Tested and Approved applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
Intel Corporation
5200 NE Elam Young Pkwy
Hillsboro, OR 97124-6497
(800) 628-8686
Disk controllers and drivers verified through testing:
Controller Driver Name Driver Date
DPT PM2012B/90 [BIOS 003.F] PM12NW31.DSK 15 JUN 1991
DPT PM2012B/95 [BIOS 001.H] PM12NW2.OBJ 16 JUN 1991
Adapters and drivers used in testing:
LAN Adapter Driver Type Driver Name Driver Date
3Com EtherLink Plus 2.2 Server ?3C505A1.OBJ 10 JAN 1991
(3C505) 2012 3.11 Server 3C505.LAN 17 JAN 1991
DOS IPX workstation S3C505.OBJ 17 JAN 1991
DOS ODI workstation 3C505.COM 11 JAN 1991
SMC PC-130 ARCNET 2.2 Server ?TRXNTA1.OBJ 16 NOV 1990
3.11 Server TRXNET.LAN 07 JAN 1991
DOS IPX workstation STRXNET.OBJ 17 DEC 1990
DOS ODI workstation TRXNET.COM 10 DEC 1990
IBM Token-Ring 16/4 2.2 Server ?TOKENA2.OBJ 31 JUL 1991
3.11 Server TOKEN.LAN 11 FEB 1991
DOS IPX workstation STOKEN.OBJ 22 OCT 1990
DOS ODI workstation TOKEN.COM 10 JAN 1991
Novell NE1000 2.2 Server ?NE100A1.OBJ 22 AUG 1990
3.11 Server NE1000.LAN 31 JAN 1991
DOS IPX workstation SNE1000.OBJ 31 AUG 1990
DOS ODI workstation NE1000.COM 29 NOV 1990
Novell NE2000 2.2 Server ?NE200A1.OBJ 19 JUL 1990
3.11 Server NE2000.LAN 31 JAN 1991
DOS IPX workstation SNE2000.OBJ 18 JUL 1990
DOS ODI workstation NE2000.COM 29 NOV 1990
IBM Token-Ring II 2.2 Server ?TOKENA2.OBJ 31 JUL 1991
3.11 Server TOKEN.LAN 11 FEB 1991
DOS IPX workstation STOKEN.OBJ 22 OCT 1990
DOS ODI workstation TOKEN.COM 10 JAN 1991
3Com EtherLink II (3C503) 2.2 Server ?3C503A1.OBJ 17 AUG 1990
3.11 Server 3C503.LAN 21 JAN 1991
DOS IPX workstation S3C503.OBJ 01 NOV 1990
DOS ODI workstation 3C503.COM 29 NOV 1990
Novell NE2100 2.2 Server ?NE210A2.OBJ 25 FEB 1991
3.11 Server NE2100.LAN 30 APR 1991
DOS IPX workstation SNE2100.OBJ 19 FEB 1991
DOS ODI workstation NE2100.COM 18 MAR 1991
Novell NE3200 3.11 Server NE3200.LAN 06 FEB 1991
3Com EtherLink (3C501) DOS ODI workstation 3C501.COM 29 NOV 1990
Novell X.25 Extended Adapter Communications ?BRX25DR.OBJ 30 AUG 1990
Novell WNIM+ Adapter Communications COMWNIM.COM 23 JAN 1992
Certification for XpressRACK 6 Slot
(This certificate can be obtained through Intel FaxBACK document 4213)
NOVELL
XpressRACK 6 Slot 50MHz i486DX F-1450
by Intel Corporation 05 JAN 1993
Tested and Approved NetWare compatible as a File Server/Workstation with the following Novell products:
NetWare (v3.11)
NetWare Lite (v1.0)
NetWare for Macintosh (v3.01)
NetWare 3270 LAN Workstation (v2.0)
NetWare Btrieve (v5.15)
NetWare SQL (v2.11a)
NetWare SNA Token-Ring (v1.3)
NetWare SAA Token-Ring (v1.1)
Novell Print Server (v1.21)
NetWare Access (v1.22)
OnLAN/PC (v1.22)
NetWare Link/64 (v1.1)
NetWare Link/T1 (v1.1)
NetWare Link/X.25 (v1.00)
NetWare Asynchronous Remote Router (v1.2a)
NetWare Asynchronous Communications Server (v2.07d)
Test Configuration:
Product Name/Model/Rev: XpressRACK 6 slot 50MHz i486DX2
CPU Family/Clock Speed: 80486DX2/50 MHz
Controller(s)/Fixed Disk(s): Adaptec AHA-1740/42A [1.34]
SCSI (340 M) Maxtor LXT-340S
Bus Type: EISA (Six 32-bit slots)
ROM BIOS Version: PhoenixBIOS(TM) E486 Version 1.00.04.R0
Main/CPU Board Revision: PBA 517901-004 / PBA 518609-003
CPU Memory: Base 640 Extended 7168
Video Adapter: VGA
Vendor Software: MS DOS (5.0), MS Windows (3.0)
Configuration Utility: !INT3071.CFG (18 FEB 1992 09:55AM 7356 bytes)
Configuration Notes:
NetWare Lite was also tested with DR DOS (6.0).
The term Tested and Approved applies only to the exact configuration documented in this bulletin. For more information regarding the specific test configuration, please contact:
Intel Corporation
5200 NE Elam Young Pkwy
Hillsboro, OR 97124-6497
(800) 628-8686
Disk controllers and drivers verified through testing:
Controller Driver Name Driver Date
Adaptec AHA-1740/42A [1.34] AHA1740.DSK 01 JUL 1991
ASPITRAN.DSK 31 JUL 1990
Adapters and drivers used in testing:
LAN Adapter Driver Type Driver Name Driver Date
Novell NE3200
3.11 Server NE3200.LAN 06 FEB 1991
SMC PC-130 ARCNET 3.11 Server TRXNET.LAN 07 JAN 1991
DOS IPX workstation STRXNET.OBJ 17 DEC 1990
DOS ODI workstation TRXNET.COM 10 DEC 1990
Novell NE2000
3.11 Server NE2000.LAN 31 JAN 1991
DOS IPX workstation SNE2000.OBJ 18 JUL 1990
DOS ODI workstation NE2000.COM 29 NOV 1990
Novell NE1000
3.11 Server NE1000.LAN 31 JAN 1991
DOS IPX workstation SNE1000.OBJ 31 AUG 1990
DOS ODI workstation NE1000.COM 29 NOV 1990
IBM Token-Ring II
3.11 Server TOKEN.LAN 11 FEB 1991
DOS IPX workstation STOKEN.OBJ 22 OCT 1990
DOS ODI workstation TOKEN.COM 10 JAN 1991
3Com EtherLink II (3C503)
3.11 Server 3C503.LAN 21 JAN 1991
DOS IPX workstation S3C503.OBJ 01 NOV 1990
DOS ODI workstation 3C503.COM 29 NOV 1990
Novell NE2100
3.11 Server NE2100.LAN 30 APR 1991
DOS IPX workstation SNE2100.OBJ 19 FEB 1991
DOS ODI workstation NE2100.COM 18 MAR 1991
IBM Token-Ring 16/4
3.11 Server TOKEN.LAN 11 FEB 1991
DOS IPX workstation STOKEN.OBJ 22 OCT 1990
DOS ODI workstation TOKEN.COM 10 JAN 1991
3Com EtherLink Plus (3C505) 2012
3.11 Server 3C505.LAN 17 JAN 1991
DOS IPX workstation S3C505.OBJ 17 JAN 1991
DOS ODI workstation 3C505.COM 11 JAN 1991
3Com EtherLink (3C501)
DOS ODI workstation 3C501.COM 29 NOV 1990
Known Errata
Environmental Limits are reduced with Dual Pentium module
The BXCPU2XPENT66 (Dual Pentium) failed thermal testing at the standard rackmount ambient temperature of 50 C, but it passed at 40 C. Therefore the ambient temperature with the Dual Pentium module must not exceed 40 deg. C.
General Description
The XpressRACK plated steel chassis is a 19-inch wide industrial system based on the 6- and 8-slot Xpress system baseboards. The chassis design allows for slide mounting in an industry standard RETMA 19-inch equipment rack. XpressRACK requires 4 RETMA units (7 inches) of rack height and is suitable for installation in racks with depths of at least 28 inches. The 6-slot XpressRACK industrial positive pressure system is equipped with a 300 watt (switch selectable) power supply, four 5¼" half-height peripheral bays, integrated I/O ports, and the integrated video/IDE/floppy controllers freeing up valuable EISA slots. The 8-slot XpressRACK industrial chassis also incorporates the positive pressure chassis design, four 5¼" peripheral bays and integrated system baseboard features, but includes an auto-ranging 396 watt power supply and programmable Liquid Crystal Display (LCD). The dual 50 cfm fans found in both XpressRACK systems are designed to create positive air pressure in the system preventing airborne contaminants from entering the system and are more than adequate to cool a Pentium CPU module or wide range of available i486 SX, DX, or DX2 CPU modules along with any peripherals and EISA/ISA add-in cards. The XpressRACK systems include world class safety, EMI/RFI, Novell and Banyan certifications to ensure safe and reliable operation in the industrial environment.
Dimensions
(This information can be obtained via Intel FaxBACK document 4150)
Dimensions | XpressRACK | 8-Slot Baseboard | 6-Slot Baseboard |
Width | 17.0" | 12.45" (31.62 cm) | 10.45" (26.54 cm) |
Depth | 25.6" | 12.70" (32.26 cm) | 12.70" (32.26 cm) |
Total Height | 7.0" | 0.550" (1.40 cm) | 0.550" (1.40 cm) |
Weight (approx.) | 54 lb. (24.41 kg.) | 5 lb. (2.27 kg.) | 5 lb (1.61 kg.) |
Environmental Specifications
(This information can be obtained via Intel FaxBACK document 4150)
Parameter | 6-slot / 8-slot Baseboards | XpressRack Systems |
Ambient Temperature | Operating: 0 C to +55 C | Operating: +5 C to +50 C |
|
| Note Errata189.3IM when Dual Pentium module installed |
Humidity | Operating: 85% RH at +55 C | Operating: 20% to 85% at +50 C |
Altitude | Operating: 10,000 ft. (3048 m) | Operating:-300 ft. to 10,000 ft. (3048 m) |
Shock | Operating: 2.0 G, ½ Sine Wave, Duration 11 ms. Non-Operating: 30 G, ½ Sine Wave, Duration 11 ms. |
Non-Operating: 30 G, ½ Sine Wave, Duration 11 ms. |
Heat Dissipation | N/A | 1,000 BTU/hr. at full DC load (300 W power supply) |
Static Discharge (ESD) | 0 - 5KV (no errors) | 0 - 5KV (no errors) |
Noise (1 meter @ 25°C) | N/A | 50 dB |
Power Supply
(This information can be obtained via Intel FaxBACK document 4150)
6-Slot System Using the Astec 300 Watt Power Supply
Input power
90 to 132 VAC or 180 to 264 VAC, switch selectable, 47 to 63 Hz.
Output power
The total wattage allowed to peripherals is 50 watts (for +5 volts and +12 volts). The total wattage allowed to the EISA slots is 56.5 watts.
Voltage | Minimum | Maximum | Peak Surge | Wattage |
+5 V | 7.0A | 35.0A | 35.0A | 175 W |
+12 V | 0.5 A | 10.0A | 14.0A | 120 W |
-12 V | 0.0 A | 0.5A | 1.0A | 6.0 W |
-5 V | 0.0 A | 0.5 A | 0.5 A | 2.5 W |
8-Slot System Using The Astec 396 Watt Power Supply
Input power
90 to 132 VAC or 180 to 264 VAC automatic range switching, 47 to 63 Hz.
Output power
The total wattage allowed to peripherals is 50 watts (for +5 volts and +12 volts). The total wattage allowed to the EISA slots is 56.5 watts.
Voltage | Minimum | Maximum | Peak Surge | Wattage |
+5 V | 11.0A | 45.0A | 45.0A | 225 W |
+12 V | 0.0A | 13.0A | 19.0A | 156 W |
-12 V | 0.0 A | 1.0A | 1.0A | 12 W |
-5 V | 0.0 A | 0.5 A | 0.5 A | 2.5 W |
Product Codes
Base Platforms
RXBASE6E4PI | Base Chassis, 6-Slot Xpress motherboard, 4MB memory, 300W power supply |
RXBASE8E8P2 | Base Chassis, 8-Slot Xpress motherboard, 8MB memory, 396W power supply, on-board SCSI controller |
Options
RMFILTER | Set of removable cartredge air filters |
Complete Product Support Services Now Available to ALL Intel Platform Customers
IntelTechDirect is a support package that helps Original Equipment Manufacturers and Value Added Resellers get to market fast with Intel386, i486 and Pentium Processor platform products - and ensures complete satisfaction from our customers and your customers.
IntelTechDirect is available 24 hours a day, seven days a week via an electronic bulletin board system and a FaxBack service. Toll-free telephone assistance is provided during business hours.
INTEL PHONE ACTION LINE SUPPORT (iPALS) 1-800-628-8686
U.S.A. & Canada
Prompts 4, 1
· Toll-free access to Intel support engineers for problem resolution
· Responses within 24 hours Monday-Friday
· Expert assistance geared to the special needs of OEMs and VARs
Related Topics:
INTEL PRODUCT UPDATE BULLETINS (iPUB Helpfiles)
INTEL PRODUCT ASSISTANCE NETWORK (iPAN)_1-916-356-3600
FAXBACK*_1-800-628-2283
INTEL PRODUCT UPDATE BULLETINS (iPUB Helpfiles)
Product updates available 24 hours a day from iPAN
· Official notification of engineering changes and technical data
· Easy information retrieval using Windows Help file format
· Intel platform system, board and BIOS histories
· Hardware and software compatibility notes
· Documentation updates, spare parts and order information
INTEL PRODUCT ASSISTANCE NETWORK (iPAN) 1-916-356-3600
· Access to on-line product database and Product Update Bulletins
· Flash BIOS upgrade files
· Available worldwide through direct-dial
· Modem speeds up to 14.4K baud with standard software
FAXBACK* 1-800-628-2283
· Product descriptions and technical data sent to any fax machine from a touchtone phone
· Information on End-Of-Life products
· Available worldwide through direct dial (916-356-3105)