|
Intel386™ 301Z Motherboard
Jumper Settings
PLEASE NOTE:
This product is no longer being manufactured by Intel. THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL
REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "LEGAL INFORMATION" LINK BELOW.
For information on currently available Intel products, please see
www.intel.com and/or developer.intel.com
End of Interactive Support
Intel is announcing the end of interactive support for the Intel386™
301Z Motherboard. See the End
of Interactive Support Announcement for details.
ROM Size
| Size |
JUMPER PIN SETTING |
| 32 K (27128) |
E33 to E34, E35 to
E36 |
| 64 K (27256) |
E32 to E331,
E35 to E361 |
| 128 K (27512) |
E32 to E33, E36 to
E37 |
Monitor Type
| DISPLAY |
JUMPER PIN SETTING |
| Color |
E26 to E271 |
| Monochrome |
E27 tO E28 |
Math Coprocessor
| Condition |
JUMPER PIN SETTING |
| Math coprocessor installed
|
E24 to E25 |
| Math coprocessor not
installed |
E22 to E23 |
Keyboard Reset
| Condition |
JUMPER PIN SETTING |
| Keyboard Reset disabled
|
E29 to E301 |
| Keyboard Reset enabled
|
E30 to E31 |
Printer Acknowledge
| Condition |
JUMPER PIN SETTING |
| Leading Edge |
E5 to E6 |
| Trailing Edge |
E4 to E51 |
Parallel Printer Port Selection
| Condition |
JUMPER PIN SETTING |
| Parallel Port disabled
|
E11 to E12 |
| LPT1 Enabled |
E2 to E31,
E9 to E101 |
| LPT2 Enabled |
E1 to E2, E7 to E8
|
Serial Communications Port
| Condition |
JUMPER PIN SETTING |
| Serial Port |
diE17 to E17 to 18 |
| COM1 Enabled |
E14 to E151,E16
to E171 E20 to E211 |
| COM2 Enabled |
E13 to 14, E16 to
17 E19 to E20 |
Expansion Board Memory
| Condition |
JUMPER PIN SETTING |
| No 32-bit RAM installed
|
E38 to E401,
E42 to E441 E45 to E461 |
| One 2M board (slot
J10) |
E39 to E40, E42 to
E44 E45 to E46 |
| Two 2M boards (J10
and J11) |
E39 to E40, E41 to
E42 E45 to E46 |
| One 8M board (slot
J10) |
E38 to E40, E42 to
E44 E43 to E45 |
One 2M board (J10)
One 8M board (J11) |
E39 to E40, E41 to
E42 E43 to E45 |
Two 8M boards
(J10 and J11) |
E38 to E40, E41 to
E42 E43 to E45 |
1 Factory Default
|
|
|
