|
Intel386™ 301 Motherboard
Jumper Settings
PLEASE NOTE:
This product is no longer being manufactured by Intel. THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL
REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "LEGAL INFORMATION" LINK BELOW.
For information on currently available Intel products, please see
www.intel.com and/or developer.intel.com
End of Interactive Support
Intel is announcing the end of interactive support for the Intel386™
301 Motherboard. See the End
of Interactive Support Announcement for details.
Monitor Type
| DISPLAY |
JUMPER PIN SETTING |
| Color |
E11 to E121 |
| Monochrome |
E10 to E11 |
Options for Standard Board
| Options |
JUMPER PIN SETTING |
| 512 KB on System Board |
E28 to E30, E32 to
E34, E35 to E36 |
512 KB on System Board
2MB in Slot J7/J19 |
E29 to E30, E32 to
E34, E35 to E36 |
512 KB on System Board
2MB in Slot J7/J19 and Slot J8/J201 |
E29 to E30, E31 to
E32, E35 to E36 |
512 KB on System Board
2MB in Slot J7/J19, 8MB in Slot J8/J20 |
E29 to E30, E31 to
E32, E35 to E36 |
Options for 16MB RAM
| Options |
JUMPER PIN SETTING |
| 512 KB on System Board |
E28 to E30, E32 to
E34, E35 to E36 |
512 KB on System Board
8MB in Slot J7/J19 |
E29 to E30, E32 to
E34, E35 to E36 |
512 KB on System Board
8MB in Slot J7/J19,2MB in Slot J8/J20 |
E31 to E32, E33 to
E35 |
512 KB on System Board
8MB in Slot J7/J19,8MB in Slot J8/J20 |
E29 to E30, E31 to
E32, E33 to E35 |
ROM Size
| Size |
JUMPER PIN SETTING |
| 32 K Bytes Total (Two
27128 ROMs) |
E14 to E15, E17 to
E18 |
| 64 K Bytes Total (Two
27256 ROMs)1 |
E13 to E14, E17 to
E18 |
| 128 K Bytes Total
(Two 27512 ROMs) |
E13 to E14, E16 to
E17 |
Serial Communications Port
| Options |
JUMPER PIN SETTING |
| Disable serial port |
E19 to E20 |
| Enable serial port |
E20 to E211 |
| Select COM1 |
E41 to E421 |
| Select COM2 |
E40 to E41 |
| IRQ4 (COM1) |
E37 to E381 |
| IRQ3 (COM2) |
E38 to E39 |
Parallel Printer Port Selection
| Options |
JUMPER PIN SETTING |
| Select LPT1 |
E22 to E23 |
| Select LPT2 |
E24 to E251 |
| Disable printer port |
E26 to E27 |
| IRQ7 (LPT1) |
E44 to E45 |
| IRQ5 (LPT2) |
E43 toE441 |
Printer Acknowledge
| Options |
JUMPER PIN SETTING |
| Leading edge |
E8 to E9 |
| Trailing edge |
E7 to E81 |
Keyboard Reset
| Options |
JUMPER PIN SETTING |
| Keyboard reset enabled
|
E1 to E2 |
| Keyboard reset disabled |
E2 to E31 |
Math Coprocessor
| Options |
JUMPER PIN SETTING |
| Math coprocessor installed
|
E46 to E47 |
| Math coprocessor not
installed |
E48 to E491 |
1 Factory Default
|
|
|
