[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**82395SX Smart Cache 12/17/90
***Notes:...
**82396SX Smart Cache 12/17/90...
**82485 Turbo Cache (and 485Turbocache) c90...
**82489DX Advanced Programmable Interrupt Controller 10/12/92...
**82495DX/490DX DX CPU-Cache Chip Set <Sep91...
**82495XP/490XP Cache Controller / Cache RAM (for i860) 06/05/91...
**82496/491 Cache Controller / Cache RAM (for P5 Pentium) 03/22/93...
**82497/492 Cache Controller / Cache RAM (for P54 Pentium) <Nov94...
**82498/493 Cache Controller / Cache RAM (for P54 Pentium) <Nov94...
**
**Later chipsets (basic spec):
**440 series:...
**450NX (?) 06/29/98:...
**????? (Profusion) c:99...
**800 series
***810 (Whitney) 04/26/99...
***810L (Whitney) 04/26/99...
***810-DC100 (Whitney) 04/26/99...
***810e (Whitney) 09/27/99...
***810e2 (Whitney) 01/03/01...
***815 (Solano) 06/19/00...
***815e (Solano-2) 06/19/00...
***815em (Solano-?) 10/23/00...
***815ep (Solano-3) c:Nov'00...
***815p (Solano-3) c:Mar'01...
***815g (Solano-3) c:Sep'01...
***815eg (Solano-3) c:Sep'01...
***820 (Camino) 11/15/99...
***820e (Camino-2) 06/05/00...
***830M (Almador) 07/30/01...
***830MP (Almador) 07/30/01...
***830MG (Almador) 07/30/01...
***840 (Carmel) 10/25/99...
***845 (Brookdale) 09/10/01...
***845MP (Brookdale-M) 03/04/02...
***845MZ (Brookdale-M) 03/04/02...
***845E (Brookdale-E) 05/20/02...
***845G (Brookdale-G) 05/20/02...
***845GL (Brookdale-GL) 05/20/02...
***845GE (Brookdale-GE) 10/07/02...
***845PE (Brookdale-PE) 10/07/02...
***845GV (Brookdale-GV) 10/07/02...
***848P (Breeds Hill) c:Aug'03...
***850 (Tehama) 11/20/00...
***850E (Tehama-E) 05/06/02...
***852GM (Montara-GM) 01/14/03...
***852GMV (Montara-GM) ???...
***852PM (Montara-GM) 06/11/03...
***852GME (Montara-GM) 06/11/03...
***854 (?) 04/11/05...
***855GM (Montara-GM) 03/12/03...
***855GME (Montara-GM) 03/12/03...
***855PM (Odem) 03/12/03...
***860 (Colusa) 05/21/01...
***865G (Springdale) 05/21/03...
***865PE (Springdale-PE) 05/21/03...
***865P (Springdale-P) 05/21/03...
***865GV (Springdale-GV) c:Sep'03...
***875P (Canterwood) 04/14/03...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
**5571 (Trinity) Pentium PCI/ISA Chipset (75MHz) <12/09/96
***Info:
[no general section in datasheet]
3. Functional Description
3.1 DRAM Controller
3.1.1 DRAM Type
The SiS5571 can support up to 384MBytes (3 banks) of DRAMs and each
bank could be single or double sided 64 bits FP (Fast Page mode) DRAM,
EDO (Extended Data Output) DRAM, and SDRAM (Synchronous DRAM)
DRAM. Half populated bank(32-bit) is also supported.
The installed DRAM type can be 256K, 512k, 1M, 2M, 4M or 16M bit deep
by n bit wide DRAMs, and both symmetrical and asymmetrical type DRAM
are supported. It is also permissible to mix the DRAMs (FP/EDO/SDRAM)
bank by bank and the corresponding DRAM timing will be switched
automatically according to register settings.
3.1.2 DRAM Configuration
The SiS5571 can support single sided or double sided DRAM modules for
each bank. The basic configurations are shown as the following:
3.1.3 Double-sided DRAM [omitted see datasheet]
3.1.4 Single-sided DRAM [omitted see datasheet]
3.1.5 DRAM Scramble Table [omitted see datasheet]
3.1.6 64-bit mapping table [omitted see datasheet]
3.2 DRAM Performance [omitted see datasheet]
3.3 CPU to DRAM Posted Write FIFOs
There is a built-in CPU to Memory posted write buffer with 8 QWord
deep ( CTMFF). All the write access to DRAM will be buffered. For the
CPU read miss / Line fill cycles, the write- back data from the second
level cache will be buffered first, and right after the data had been
posted write into the FIFO, CPU can performs the read operation by the
memory controller starting to read data from DRAMs. The buffered data
are then written to DRAM whenever no any other read DRAM request
comes. With this concurrent write back policy, many wait states are
eliminated. If there comes a bunch of continuous DRAM write cycles,
some ones will be pending if the CTMFF is full.
3.4 32-bit (Half-Populated) DRAM Access
For the read access, there will be either single or burst read cycle
to access the DRAM which depends on the cacheability of the cycle. If
the current DRAM configuration is half-populated bank, then the
SiS5571 will assert 8 consecutive cycles to access DRAM for the burst
cycle. For the single cycle that only accesses DRAM within a DWord,
the SiS5571 will only issue one cycle to access DRAM. For the single
cycle that accesses one Qword or cross DWord boundary, the SiS5571
will issue two consecutive cycles to access DRAM.
3.5 Arbiter
The arbiter is the interface between the DRAM controller and the host
which can access DRAMs. In addition to pass or translate the
information from outside to DRAM controller, arbiter is also
responsible for which master has higher priority to access DRAMs. The
arbiter treats different DRAM access request as DRAM master, and that
makes there be 5 masters which are trying to access DRAMs by sending
their request to the arbiter. After one of them get the grant from the
arbiter, it owns DRAM bus and begins to do memory data transaction.
The masters are: CPU read request, PCI master, Posted write FIFO write
request, and Refresh request. The order of these masters shown above
also stands for their priority to access memory.
3.6 Refresh cycle
The refresh cycle will occur every 15.6 us. It is timed by a counter
of 14Mhz input. The CAS[7:0]# will be asserted at the same time, and
the RAS[5:0]# are asserted sequentially.
3.7 PCI bridge
SiS5571 is able to operate at both asynchronous and synchronous PCI
clocks. Synchronous mode is provided for those synchronous system to
improve the overall system performance. While in the PCI master write
cycles, post-write is always performed. And function of Write Merge
with CPU-to-DRAM post-write buffer is incorporated to eliminate the
penalty of snooping write-back. On the other hand, prefetch is enabled
for master read cycles by default, and such function could be disabled
optionally. And, Direct-Read from CPU-to-DRAM post-write buffer is
implemented to eliminate the overhead of snooping write-back also. In
addition to Write-Merge and Direct-Read, Snoop-Ahead also hides the
overhead of inquiry cycles for master to main memory cycles. These key
functions, Write-Merge, Direct-Read and Snoop-Ahead, achieve the
purpose of zero wait for PCI burst transfer. The post-write and
prefetch buffers are both 16 Double-Word deep FIFOs.
3.8 Snooping Control [omitted see datasheet]
3.9 AHOLD/BOFF# Process and Arbiter Interface [omitted see datasheet]
3.10 Target Initiated Termination [omitted see datasheet]
3.11 DATA Flow [omitted see datasheet]
3.12 PCI Master Read/Write DRAM Cycle [omitted see datasheet]
***Configurations:...
***Features:...
**5581/5582 (Jessie) Pentium PCI/ISA Chipset (75MHz) <04/15/97...
**5591/5592/5595 (David) Pentium PCI A.G.P. Chipset <01/09/98...
**5596/5513 (Genesis) Pentium PCI Chipset <03/26/96...
**5597/5598 (Jedi) Pentium PCI/ISA Chipset <04/15/97...
**530/5595 (Sinbad) Host, PCI, 3D Graphics & Mem. Ctrl.<11/10/98...
**540 (Spartan) Super7 2D/3D Ultra-AGP Single C.S.<11/30/99...
**55x SoC (System-on-chip) <03/14/02...
**
**Support chips:
**85C206 Integrated Peripheral Controller [no datasheet] ?...
**5595 Pentium PCI System I/O <12/24/97...
**950 LPC I/O <07/16/99...
**Other:...
**PII/III/Pro...
**Athlon etc...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
**W83759/A/F/AF Advanced VL-IDE Disk Controller <96
***Notes:...
***Info:
GENERAL DESCRIPTION
The W83759A is an advanced version of Winbond's popular VL-IDE
interface chip, the W83759. The W83759A retains all of the features
and compatibility of the W83759 (the chip meets the ANSI ATA 4.0
specification for IDE hard disk operation and the VESA VL-Bus 2.0
specification for PC local bus devices) while incorporating new
features to meet Enhanced IDE, SFF-8011, ATA-2, and Fast-ATA
specifications.
Supports Disk Capacity of Greater than 528 MB
The W83759A's driver can handle remapping from BIOS CHS mode to HDD
LBA mode. This scheme enables users to break the 528 MB per drive
barrier, allowing full use of BIOS INT13 CHS information in drives
with a capacity of up to 8.4 GB.
High Speed Host Transfer Rate
The W83759A supports Enhanced IDE PIO mode 3 and Fast ATA PIO mode 3
and 4 timing; jumper settings or driver programming can be used to
select the PIO mode and a 33 or 50 MHz VL-Bus clock. Different
programming timing can be selected for different drives in the same
system. The burst transfer rate is shown in the following table.
ATA PIO IDE COMMAND CYCLE BURST TRANSFER RATE IORDY THROTTLE
MODE TIME (nS) (MB/sec) CONTROL
0 600 3.33 Option
1 383 5.22 Option
2 240 8.33 Option
3 180 11.1 Required
4 120 16.6 Required
Dual IDE Channels
Like the W83759, the W83759A supports a secondary IDE address
(170h-177h/376h) and IRQ15 for applications with four hard disk
drives. Additionally, the primary and secondary channels can be
independently enabled or disabled by jumper settings or software
programming.
Non-disk IDE Peripherals
Because the command cycle can be programmed individually for each
drive and dual IDE channels are supported, non-disk IDE peripherals
(such as an ATAPI CD-ROM or tape drive) can be attached to the
secondary IDE without affecting the transfer rate of the ATA disk
drive. Sales of ATAPI IDE CD-ROMs are expected to grow rapidly as
these devices become a standard part of many users' desktop PC setup.
The W83759A provides all of the next-generation ATA-IDE requirements,
including support for high capacity disk drives, high speed host
transfers, multiple IDE peripherals, and non-disk IDE peripherals. It
makes high-performance, low-cost, easy-to-use IDE machines possible.
The W83759A is pin-to-pin backward compatible with the W83759. In
addition to the advanced features described above, the W83759A
supports automatic power-down, standby, and suspend APM power
management states for green PC applications. This new chip is packaged
in a 100-pin QFP.
The table below compares the W83759 and W83759A:
W83759 W83759A
Dual Channel IDE Yes Yes
8.4 G Max. Cap. Software Driving Software Driving
PIO Mode 3, 4 Control No Yes*
DMA Mode Control No Yes*
IOCHRDY Control No Yes*
IDE Timing Control Jumper Jumper or Driver*
Prefetch Control No Yes*
Power Saving Control No Yes*
ATAPI Protocol Software Driving Software Driving
>* All control is drive-by-drive (per drive selectability)
***Versions:...
***Features:...
**W83769 Local Bus IDE Solution <94...
**
**UARTS:
**W86C250A UART (equivalent of INS8C250A) [no datasheet]
**W86C450/P Universal Asynchronous Receiver/Transmitter <Jul89...
**W86C451 I/O controller for IBM PC/AT/XT <Jul89...
**W86C452 I/O controller for IBM PC/AT Jul89...
**W86C456 I/O controller [no datasheet] ?
**W860551/P UART with FIFO and Printer Port Controller <94...
**
**Other:...
*ZyMOS...
*General Sources:...
(c) Copyright mR_Slugs Warehouse - All rights Reserved