[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq  . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**?????  (Profusion)    c:99
Chips:         
Memory Access Controller (MAC)  
Data Interface Buffer (DIB)
CPUs:          8x P-III Xeon Oct
DRAM Types:    SDRAM PC100 2-way Interleave dual channel
Max Mem:       32GB
ECC/Parity:    ECC
AGP speed:     N/A
Bus Speed:     100
PCI Clock/Bus: 1/3 PCI-66/64



**800 series...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
*Symphony...
**SL82C360   'Haydn' 80386DX/SX chipset [no datasheet]         c:Jun91
***Notes:...
***Configurations:...
**SL82C460   'Haydn II' 80486 chipset   [no datasheet]         c:Jun91...
**SL82C470   'Mozart' 486/386 EISA chipset                     c:Dec91...
**SL82C490   'Wagner' 486?              [no datasheet]               ?...
**SL82C550   'Rossini' Pentium          [no datasheet]            c:95...
**
**Support Chips:
**SL82C365    Cache Controller (for 386DX/SX)                     c:91...
**SL82C465    Cache Controller (for 486/386DX/SX)                 c:91
***Info:
The SL82C465 cache controller supports both 1X and 2X clock modes. The
1X clock  mode means that the CCLK2  signal is used as  the CPU clock;
the 2X clock  mode means that the PCLK signal  (half the frequency and
the phase indicator  of CCLK2) is used as the  CPU clock. The SL82C465
and other CPU local bus devices run at the same clock frequency as the
CPU, while  the rest of the system  runs at the frequency  of PCLK. In
other words, the operating frequency of the system logic is either the
same (2X clock mode) or half the speed of the CPU (1X clock mode). For
the 1X clock mode, the timing of the signals between the CPU/Cache and
the system logic interface  is converted by the SL82C465 automatically
to  satisfy  the requirement  of  individual  clocks.  Table 1-1  [see
datasheet] lists  the operating frequencies  of the CPU local  bus and
the system logic with the oscillator used.

The 2X  clock mode is recommended  for a CPU frequency  no faster than
33Mhz because the system logic  is available at the targeted speed and
the  performance  is  slightly  better  than if  1X  clock  mode  were
used. For  a CPU  frequency faster  than 33Mhz, the  1X clock  mode is
preferred  for  486  systems  because  it  becomes  increasingly  more
difficult to  build a reliable  system with an oscillator  faster than
66Mhz.

***Versions:...
***Features:...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
**S
***Shasta...
***SARC...
***ServerWorks (Reliance Computer Corporation)...
***Sun Electronics (SUNTAC) ...
***Syslogic...
***Other...
**T - Z...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
*ZyMOS...
*General Sources:...