[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq  . . . . . [no datasheets, some info]...
**82C599    PCI-VLB Bridge [no datasheet, some info]                 ?

82C599 PCI-VLB Bridge referenced in:
http://web.mit.edu/netbsd/src/sys/dev/pci/pcidevs

from:
https://web.archive.org/web/20050313090427/http://www.os2forum.or.at/english/info/os2hardwareinfo/pci_chips.html

"The Contaq Chipset (Contaq: 1080/4224) (8/27/95)

The Contaq 82C599  is paired with one of  their 486VL chipsets (82C596
or  82C597) and  bridges directly  from the  486 CPU  to the  PCI bus.
Paraphrased from the Contaq spec.:

The  82C596 system  controller provides  the CPU  interface,  VESA bus
interface, ISA bus controller, etc. The 82C599 PCI controller provides
the bridge  between PCI master/slave  agent and the  ISA/VESA standard
expansion  bus; it arbitrates  all the  bus transactions  between host
CPU, PCI agent, VESA device, and ISA device.

(Which sounds to me like the PCI bus is attached to the VL bus, rather
than to the CPU, which will cause PCI performance degradation.)"

**82C693    PCI-ISA Bridge [no datasheet]                            ?...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**?????  (Profusion)    c:99
Chips:         
Memory Access Controller (MAC)  
Data Interface Buffer (DIB)
CPUs:          8x P-III Xeon Oct
DRAM Types:    SDRAM PC100 2-way Interleave dual channel
Max Mem:       32GB
ECC/Parity:    ECC
AGP speed:     N/A
Bus Speed:     100
PCI Clock/Bus: 1/3 PCI-66/64



**800 series...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
**82C898         System/Power Management Controller (non-cache)c:Nov94
***Notes:...
***Info:
Overview
The 82C898 provides a highly integrated solution for fully compatible,
high performance PC/AT platforms. The 82C898 supports 486SX/DX/DX2/DX4
and  P24T  microprocessors  in  the  most  cost  effective  and  power
efficient designs  available today. For  high-end system applications,
this  device offers  optimum  performance for  systems  running up  to
50MHz.  

Based  fundamentally  on  OPTi’s   proven  82C801  and  82C802  design
architectures,  the 82C898 adds  additional memory  configurations and
extensive  power  management  control  for  the  processor  and  other
motherboard components.

The 82C898  supports the latest  in write-back processor  designs from
Intel, AMD, and Cyrix, as well as supporting the AT bus and VESA local
bus  for compatibility  and performance.  It also  includes  an 82C206
Integrated Peripherals Controller (IPC),  all in a single 208-pin PQFP
(Plastic Quad Flat Pack) for low cost.

Power Management
Figure  2-1   [see  datasheet]  exemplifies  the   flexibility  of  an
82C898/82C602-based designs GREEN strategy.  System designs can easily
accommodate both  SLe and non-SLe  CPUs.  If  an Intel non-SLe  CPU is
used, SMI#, SMIAOT#, and FLUSH# are no connects. One design can easily
accommodate  both  types  of   processors  with  minimal  changes  for
upgrades.

***Configurations:...
***Features:...
**
**Support Chips:
**82C601/2       Buffer Devices                                 <Nov94...
**82C822         PCIB (VLB-to-PCI bridge)                         c:94...
**Other:...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
*ZyMOS...
*General Sources:...