[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**450NX (?) 06/29/98:
Chips:
[82454NX] (PXB) [82453NX] (MUX)
[82452NX] (RCG) [82451NX] (MIOC)
[82371EB] (PIIX4E),
CPUs: Single/Dual/Quad P-II Xeon/P-III Xeon
DRAM Types: FPM EDO 2-way Interleave 4-way Interleave
Mem Rows: 8
DRAM Density: 16Mbit 64Mbit
Max Mem: 8GB
ECC/Parity: Both
AGP speed: N/A
Bus Speed: 100
PCI Clock/Bus: 1/3
**????? (Profusion) c:99...
**800 series...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
**Other:
SL7001 MDA Graphics Controller
SL5001 Parallel Printer Port Interface
SL2002 Dual Channel NRZI Encoder / Decoder
SL4000 Lan controller
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
**FE3600/A/B/C 16/20MHz AT Chip set c:88
***Notes:...
***Info:...
***Configurations:...
***Features:...
**FE5300 CPU Core Logic for PS/2 Model 50/60 Compatibles c:87...
**FE5400 CPU Core Logic for PS/2 Model 50/60 Compatibles c:87...
**FE6500 CPU Core Logic for PS/2 Model 70/80 Compatibles c:88...
**WD6400SX/LP CPU Core Logic for PS/2 386SX Compatibles <90...
**WD6500 CPU Core Logic for PS/2 386DX/486 Compatible <90...
**WD7600A/LP/LV System Chip Set for 80286 or 80386SX <11/25/91...
**WD7700/LP System Chip Set for 80286 or 80386SX (Cache) <11/25/91...
**WD7855 System controller for 80386SX <09/25/92...
**WD7900/LP/LV System Chip Set for 80286 or 80386SX (Cache) <11/25/91...
**WD8110 System controller for 80386DX/486 <11/30/93...
**
**Support Chips:
**WD76C20x Floppy, RTC, IDE and Support Logic Device <11/25/91...
**WD76C30x Perip. Ctrl, Interrupt Multiplex, and Clock Gen <11/18/91
***Notes:...
***Info:
GENERAL
The WD76C30/LV device provides three functional groups. It is a Per-
ipheral Controller, Interrupt Multiplexer, and Clock Generator.
The low power CMOS WD76C30/LV is a single device solution which
provides interrupt multiplexing logic, clock generation, two serial
ports, and one bidirectional parallel port.
Interrupt multiplexing logic interfaces the PC/AT interrupt request
lines with the WD76C10 Single Chip AT Controller.
Integrated clock generation circuitry uses the 48 MHz input signal to
generate the 1.8462, 3.072, and 8.0 MHz clocks used internally for the
two serial ports, a 9.6 MHz Signal used for the keyboard controller
and floppy controller, a programmable duty/frequency clock for the
80287 coprocessor, and a 16 MHz clock for driving the WD76C10 Single
Chip AT Controller, and floppy controller.
For low power implementations such as laptops, oscillator disable and
sleep modes are available to power down unused logic.
The bidirectional parallel port is software configurable as either a
PC/AT or a PS/2 compatible port. The parallel port data lines and open
drain printer signals have high current drive capabilities.
Each ACE is programmable as either a WD16C550 or WD16C450 compatible
device. Each WD16C550 configured ACE is capable of buffering up to 16
bytes of data upon reception, relieving the CPU of interrupt
overhead. Buffering of data also allows greater latency time in
interrupt servicing which is vital in a multitasking environment. Each
ACE has a maximum recommended data rate of 512 Kbaud.
WD76C30/LV DIFFERENCES
Both the WD76C30 and WD76C30LV operate with two power supplies. The
WD76C30 logic is powered by a 5.0 volt supply, while the WD76C30LV
logic is powered by a 3.3 volt supply. The parallel and serial port
interfaces are only supported by the WD76C30.
PERIPHERAL CONTROLLER
The peripheral controller is functionally equivalent to the WD16C452/
552. The mode of operation of the serial ports and parallel port is
selectable via the Mode Select Register. Each serial port is
configurable as either a FIFO enhanced ACE (WD16C550 compatible) or a
standard ACE (WD16C450). The parallel port is configurable as either a
PS/2 bidirectional parallel port or a PC/AT compatible parallel port.
A detailed description of the Mode Selection Register is described in
the parallel port section.
***Versions:...
***Features:...
**WD7615 Desktop Buffer Manager <04/15/92...
**WD7625 Desktop Buffer Manager <10/01/92...
**WD8120LV Super I/O [no datasheet] ?
**Other Chips:...
*Winbond...
*ZyMOS...
*General Sources:...
(c) Copyright mR_Slugs Warehouse - All rights Reserved