[Home] [This version is outdated, a new version is here]
*Title...
*Search:...
*Read Me/FAQ/General Info...
*_IBM...
*ACC Micro...
*ALD...
*ALi...
*AMD . . . . . . . [no datasheets, some info]...
*Chips & Technologies...
*Contaq . . . . . [no datasheets, some info]...
*Efar Microsystems [no datasheets, some info]...
*ETEQ...
*Faraday...
*Forex . . . . . . [List only, no datasheets found]...
*Intel...
**450NX (?) 06/29/98:
Chips:
[82454NX] (PXB) [82453NX] (MUX)
[82452NX] (RCG) [82451NX] (MIOC)
[82371EB] (PIIX4E),
CPUs: Single/Dual/Quad P-II Xeon/P-III Xeon
DRAM Types: FPM EDO 2-way Interleave 4-way Interleave
Mem Rows: 8
DRAM Density: 16Mbit 64Mbit
Max Mem: 8GB
ECC/Parity: Both
AGP speed: N/A
Bus Speed: 100
PCI Clock/Bus: 1/3
**????? (Profusion) c:99...
**800 series...
*Headland/G2...
*HMC (Hulon Microelectronics)...
*Logicstar...
*Motorola...
*OPTi...
*PC CHIPS/Amptron/Atrend/ECS/Elpina/etc...
*SIS...
**5597/5598 (Jedi) Pentium PCI/ISA Chipset <04/15/97
***Info:...
***Configurations:...
***Features:...
**530/5595 (Sinbad) Host, PCI, 3D Graphics & Mem. Ctrl.<11/10/98...
**540 (Spartan) Super7 2D/3D Ultra-AGP Single C.S.<11/30/99...
**55x SoC (System-on-chip) <03/14/02...
**
**Support chips:
**85C206 Integrated Peripheral Controller [no datasheet] ?...
**5595 Pentium PCI System I/O <12/24/97
***Notes:...
***Info:...
***Versions:...
***Features:...
**950 LPC I/O <07/16/99...
**Other:...
**PII/III/Pro...
**Athlon etc...
*Symphony...
*TI (Texas Instruments)...
*UMC...
*Unresearched:...
*VIA...
*VLSI...
*Western Digital...
*Winbond...
**W83759/A/F/AF Advanced VL-IDE Disk Controller <96
***Notes:...
***Info:
GENERAL DESCRIPTION
The W83759A is an advanced version of Winbond's popular VL-IDE
interface chip, the W83759. The W83759A retains all of the features
and compatibility of the W83759 (the chip meets the ANSI ATA 4.0
specification for IDE hard disk operation and the VESA VL-Bus 2.0
specification for PC local bus devices) while incorporating new
features to meet Enhanced IDE, SFF-8011, ATA-2, and Fast-ATA
specifications.
Supports Disk Capacity of Greater than 528 MB
The W83759A's driver can handle remapping from BIOS CHS mode to HDD
LBA mode. This scheme enables users to break the 528 MB per drive
barrier, allowing full use of BIOS INT13 CHS information in drives
with a capacity of up to 8.4 GB.
High Speed Host Transfer Rate
The W83759A supports Enhanced IDE PIO mode 3 and Fast ATA PIO mode 3
and 4 timing; jumper settings or driver programming can be used to
select the PIO mode and a 33 or 50 MHz VL-Bus clock. Different
programming timing can be selected for different drives in the same
system. The burst transfer rate is shown in the following table.
ATA PIO IDE COMMAND CYCLE BURST TRANSFER RATE IORDY THROTTLE
MODE TIME (nS) (MB/sec) CONTROL
0 600 3.33 Option
1 383 5.22 Option
2 240 8.33 Option
3 180 11.1 Required
4 120 16.6 Required
Dual IDE Channels
Like the W83759, the W83759A supports a secondary IDE address
(170h-177h/376h) and IRQ15 for applications with four hard disk
drives. Additionally, the primary and secondary channels can be
independently enabled or disabled by jumper settings or software
programming.
Non-disk IDE Peripherals
Because the command cycle can be programmed individually for each
drive and dual IDE channels are supported, non-disk IDE peripherals
(such as an ATAPI CD-ROM or tape drive) can be attached to the
secondary IDE without affecting the transfer rate of the ATA disk
drive. Sales of ATAPI IDE CD-ROMs are expected to grow rapidly as
these devices become a standard part of many users' desktop PC setup.
The W83759A provides all of the next-generation ATA-IDE requirements,
including support for high capacity disk drives, high speed host
transfers, multiple IDE peripherals, and non-disk IDE peripherals. It
makes high-performance, low-cost, easy-to-use IDE machines possible.
The W83759A is pin-to-pin backward compatible with the W83759. In
addition to the advanced features described above, the W83759A
supports automatic power-down, standby, and suspend APM power
management states for green PC applications. This new chip is packaged
in a 100-pin QFP.
The table below compares the W83759 and W83759A:
W83759 W83759A
Dual Channel IDE Yes Yes
8.4 G Max. Cap. Software Driving Software Driving
PIO Mode 3, 4 Control No Yes*
DMA Mode Control No Yes*
IOCHRDY Control No Yes*
IDE Timing Control Jumper Jumper or Driver*
Prefetch Control No Yes*
Power Saving Control No Yes*
ATAPI Protocol Software Driving Software Driving
>* All control is drive-by-drive (per drive selectability)
***Versions:...
***Features:...
**W83769 Local Bus IDE Solution <94...
**
**UARTS:
**W86C250A UART (equivalent of INS8C250A) [no datasheet]
**W86C450/P Universal Asynchronous Receiver/Transmitter <Jul89...
**W86C451 I/O controller for IBM PC/AT/XT <Jul89...
**W86C452 I/O controller for IBM PC/AT Jul89...
**W86C456 I/O controller [no datasheet] ?
**W860551/P UART with FIFO and Printer Port Controller <94...
**
**Other:...
*ZyMOS...
*General Sources:...
(c) Copyright mR_Slugs Warehouse - All rights Reserved