;	Technology Concepts Ltd
;	Grange Estate
;	Cwmbran
;	Gwent
;	NP44 3XR
;	Tel: +44 (0)633 872611
;	Fax: +44 (0)633 872329
;
;	ISA CC8, CC/8B
;	CFG Version 1.0a
BOARD
  ID ="TCL0401"			;Product ID
  NAME = "CC/8, CC/8B Adapter (ISA) PAL HCH08-1"
  MFR = "Technology Concepts Ltd"
  CATEGORY = "COM"
  SLOT = ISA8OR16
  AMPERAGE = 1000
  SKIRT = NO
  READID = NO
  IOCHECK = INVALID
  DISABLE = UNSUPPORTED
  COMMENTS = "The CC8 cards provide 8 asynchronous serial ports"
  HELP = "The CC8 adapters do not support full automatic
  	  configuration. The adapter supports a number of
	  emulation and address options which are set via 
	  an 8 way switch. The adapters supports the
	  following IRQs :
	  3, 4, 5, 7, 9, 10, 11, 12, 15."
	  
SWITCH(1) = 8
 STYPE = DIP
 NAME = "SW1"
 REVERSE = NO
 VERTICAL = NO
 LABEL = LOC(1-8) "1" "2" "3" "4" "5" "6" "7" "8"
 FACTORY = LOC(1-8) 00010010

JUMPER(1) = 9
 NAME = "LK2 IRQ"
 JTYPE = TRIPOLE
 VERTICAL = NO
 REVERSE = YES
 LABEL = LOC(1-9) "2" "3" "4" "5" "7" "10" "11" "12" "15"
 FACTORY = LOC(1-9) n1nnnnnnn		;IRQ 3

FUNCTION = "Emulation / Base Address"
  COMMENTS = "Select the required emulation mode and base address" 
  
  CHOICE = "Hostess 140H"
  LINK
  PORT=0140H-017fH
  INIT=SWITCH(1) LOC (1-8) 00010000
  
  CHOICE = "Hostess 180H"
  LINK
  PORT=0180H-01bfH
  INIT=SWITCH(1) LOC (1-8) 00010001
  
  CHOICE = "Hostess 280H"
  LINK
  PORT=0280H-02bfH
  INIT=SWITCH(1) LOC (1-8) 00010010
  
  CHOICE = "Hostess 2c0H"
  LINK
  PORT=02c0H-02ffH
  INIT=SWITCH(1) LOC (1-8) 00010011
  
  CHOICE = "Hostess 300H"
  LINK
  PORT=0300H-033fH 
  INIT=SWITCH(1) LOC (1-8) 00010100
  
  CHOICE = "Hostess 580H"
  LINK
  PORT=0580H-05bfH
  INIT=SWITCH(1) LOC (1-8) 00010101
  
  CHOICE = "Hostess 680H"
  LINK
  PORT=0680H-06bfH
  INIT=SWITCH(1) LOC (1-8) 00010110
  
  CHOICE = "Hostess 700H"
  LINK
  PORT=0700H-073fH
  INIT=SWITCH(1) LOC (1-8) 00010111
   	    
FUNCTION = "Interrupt Level"
  COMMENTS = "The CC card can be configured to one of
  	      nine interrupt levels.  Use the 'Change 
	      Resource' option to set the required level.
	      The interrupt level is set via link block LK2."
  CHOICE = "Choice of : 3, 4, 5, 7, 9, 10, 11, 12, 15"
  FREE
  	    IRQ = 3 | 4 | 5 | 7 | 9 | 10 | 11 | 12 | 15 
	    SHARE = NO
	    TRIGGER = EDGE
	    INIT = JUMPER(1) LOC (1-9) 1nnnnnnnn | n1nnnnnnn | nn1nnnnnn | 
	    			       nnn1nnnnn | nnnn1nnnn | nnnnn1nnn | 
				       nnnnnn1nn | nnnnnnn1n | nnnnnnnn1

  CHOICE = "Do not use an interrupt "
  FREE
	    INIT = JUMPER(1) LOC (1-9) nnnnnnnnn