; ÉÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ»
; º  Tulip tr486dx-2/e-66 system board configuration file. º
; º  ID: TCI0071                                           º
; º  Version: 1.00               Revision 0.01             º
; º  Date: January 10th, 1992    By: MB                    º
; ÈÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍͼ
;
BOARD
   ID = "TCI0071"
   NAME = "Tulip tr486dx-2/e-66 MHz system board"
   MFR = "Tulip Computers International"
   CATEGORY = "SYS"
   SLOT = EMB(0)
   READID = YES
   COMMENTS =
     "Tulip tr486dx-2/e-66 system board configuration file.\n
      Version 1.00               Date: January 10th, 1992"
   HELP =
     "This configuration file is for Tulips tr486dx-2/e-66. It has several\n
      functions which can be changed."

SYSTEM
   NONVOLATILE = 7168
   AMPERAGE = 23000
   SLOT(1) = EISA
      LENGTH = 341
   SLOT(2) = EISA
      LENGTH = 341
   SLOT(3) = EISA
      LENGTH = 341
   SLOT(4) = EISA
      LENGTH = 341
   SLOT(5) = EISA
      LENGTH = 341
   SLOT(6) = EISA
      LENGTH = 341

CMOS(1) = 14h
   INITVAL = rrrrrrxr
CMOS(2) = 15h
CMOS(3) = 16h
CMOS(4) = 17h
CMOS(5) = 18h
CMOS(6) = 34h
   INITVAL = rrxrrrrr
CMOS(7) = 45h
   INITVAL = xrrrrxx0
CMOS(8) = 46h
   INITVAL = rrrrxxxr
CMOS(9) = 47h
   INITVAL = rrxrrxrx
CMOS(10) = 48h
CMOS(11) = 49h
CMOS(12) = 4Ah
   INITVAL = 00000000
CMOS(13) = 4Bh
   INITVAL = 00000000
CMOS(14) = 4Ch
   INITVAL = rxxxxxrr
CMOS(15) = 50h
CMOS(16) = 51h
CMOS(17) = 52h
CMOS(18) = 53h
   INITVAL = xxxx01xx
CMOS(19) = 44h
   INITVAL = rxxxrrrr

IOPORT(1) = 0461h
   INITVAL = rrr0xxxr

SWITCH(1) = 8
   NAME = "SW1"
   STYPE = DIP
   COMMENTS = " Dipswitches 1, 2 and 3 must be set according to the selected memory\n
                configuration (total onboard memory). Dipswitch 5 must be set to on\n
                when using rechargeable batteries. Dipswitches 4, 6, 7 and 8 must\n
                always be set to the factory setting for proper functioning of\n
                the system board."
   VERTICAL = NO
   REVERSE = YES
   LABEL = LOC (1-8) "MOD0" "MOD1" "MOD2" "PUS" "BATTERY" "ID2" "ID3" "AEN1"
   INITVAL = LOC (1-8) xxx0x000
   FACTORY = LOC (1-8) 10100000

GROUP = "EISA System Information"
   TYPE = "ISA"
   FUNCTION = "Slot Mapping Information"
      SHOW = NO
      CHOICE = "Slot Mapping Tables"
         SUBTYPE = "MAP"
	 FREEFORM 30, 61h,  62h,  63h,  64h,  65h,  66h, 0E0h, 0E0h,
		     0E0h, 0E0h, 0E0h, 0E0h, 0E0h, 0E0h, 0E0h,
			1,    2,    3,    4,    5,    6,    0,    0,
			0,    0,    0,    0,    0,    0,    0
ENDGROUP

FUNCTION = "DMA Controllers"
   SHOW = NO
   CHOICE = "Normal"
      FREE
         DMA = 4
         PORT = 0000h - 000Fh
         PORT = 0080h - 008Fh
         PORT = 00C0h - 00DFh

FUNCTION = "Interrupt Controllers"
   SHOW = NO
   CHOICE = "Normal"
      FREE
         IRQ = 2
         PORT = 0020h - 0021h
         PORT = 00A0h - 00A1h

FUNCTION = "Timer"
   SHOW = NO
   CHOICE = "Normal"
      FREE
         IRQ = 0
         PORT = 0040h - 0043h
         PORT = 0048h - 004Bh

FUNCTION = "Keyboard"
   SHOW = NO
   CHOICE = "Normal"
      FREE
         IRQ = 1
         PORT = 0060h
         PORT = 0064h

FUNCTION = "Status Latch"
   SHOW = NO
   CHOICE = "Normal"
      FREE
         PORT = 0061h

FUNCTION = "Real Time Clock & CMOS-RAM"
   SHOW = NO
   CHOICE = "Normal"
      FREE
         IRQ = 8
         PORT = 0070h - 0071h

FUNCTION = "Coprocessor"
   SHOW = NO
   CHOICE = "Normal"
      FREE
         IRQ = 13
	 PORT = 00F0h - 00F1h
	 INIT = CMOS(1) LOC(1) 1

FUNCTION = "TCI Extensions"
   SHOW = NO
   CHOICE = "Normal"
      FREE
         PORT = 00F2h - 00F3h
         PORT = 0C00h - 0C1Fh
         PORT = 0C20h - 0C2Fh
         PORT = 0C40h - 0C5Fh
         PORT = 0C60h - 0C7Fh
         PORT = 0C80h - 0C83h
         PORT = 46E8h
         SHARE = yes

FUNCTION = "Over-decoding"
   SHOW = NO
   CHOICE = "Normal"
      FREE
         PORT = 00F4h - 00FFh
         PORT = 0062h
         PORT = 0066h
         PORT = 0068h
         PORT = 006Ah
         PORT = 006Ch
         PORT = 006Eh

FUNCTION = "System Bios"
   SHOW = NO
   CHOICE = "Normal"
      FREE
         MEMORY = 64k
            ADDRESS = 0F0000h
	    CACHE = YES
	    WRITABLE = NO
	
FUNCTION = "Embedded Floppy Disk Controller"
   TYPE = "MSD"
   HELP = " The embedded Floppy Disk Controller can be enabled or disabled.\n
            þ Disabled: The onboard floppy controller is disabled. You need a\n
                  \t    separate floppy controller if you want to use floppy\n
                  \t    drives.\n
            þ Enabled:  The onboard floppy controller is enabled. This allows you\n
                  \t    to connect the floppy drive unit to this controller.\n
                  \t    Choose type B data transfer to have better bus\n
                  \t    performance."
      CHOICE = "Enabled - Type B"
         FREE
            DMA = 2
               TIMING = typeB
            IRQ = 6
            PORT = 3F2h
            PORT = 3F4h-3F5h
            PORT = 3F7h
	       SHARE = YES
	    INIT = CMOS(9) LOC (0) 1
      CHOICE = "Enabled - Default"
         FREE
            DMA = 2
            IRQ = 6
            PORT = 3F2h
            PORT = 3F4h-3F5h
            PORT = 3F7h
	       SHARE = YES
	    INIT = CMOS(9) LOC (0) 1
      CHOICE = "Disabled"
	 DISABLE = YES
         FREE
	    INIT = CMOS(9) LOC (0) 0

FUNCTION = "Embedded Hard Disk Controllers"
   TYPE = "MSD"
   HELP = " The Primary and Secondary Embedded Hard Disk Controller can either\n
            be enabled or disabled. Either interfaces can be set to support DMA\n
            (ATA standard). One of eight different combinations can be selected.\n
            þ Primary disabled, secondary disabled.\n
            þ Primary enabled, secondary disabled.\n
            þ Primary enabled with DMA, secondary disabled.\n
            þ Primary disabled, secondary enabled.\n
            þ Primary disabled, secondary enabled with DMA.\n
            þ Primary enabled, secondary enabled.\n
            þ Primary enabled, secondary enabled with DMA.\n
            þ Primary enabled with DMA, secondary enabled with DMA."
   CHOICE = "Primary disabled, secondary disabled"
      DISABLE = YES
      FREE
	 INIT = CMOS(9) LOC (5) 0
         INIT = CMOS(19) LOC (6-4) 000
   CHOICE = "Primary enabled, secondary disabled"
      FREE
         IRQ = 14
         PORT = 1F0h-1F7h
         PORT = 3F6h
         PORT = 3F7h
	    SHARE = YES
	 INIT = CMOS(9) LOC (5) 1
	 INIT = CMOS(19) LOC (6-4) 000
   CHOICE = "Prim. enabled (DMA), secondary disabled"
      FREE
         IRQ = 14
         DMA = 6
         PORT = 1F0h-1F7h
         PORT = 3F6h
         PORT = 3F7h
	    SHARE = YES
	 INIT = CMOS(9) LOC (5) 1
	 INIT = CMOS(19) LOC (6-4) 010
   CHOICE = "Primary disabled, secondary enabled"
      FREE
         IRQ = 15
         PORT = 170h-177h
         PORT = 376h-377h
	 INIT = CMOS(9) LOC (5) 0
	 INIT = CMOS(19) LOC (6-4) 001
   CHOICE = "Primary disabled, sec. enabled (DMA)"
      FREE
         IRQ = 15
         DMA = 7
         PORT = 170h-177h
         PORT = 376h-377h
	 INIT = CMOS(9) LOC (5) 0
	 INIT = CMOS(19) LOC (6-4) 101
   CHOICE = "Primary enabled, secondary enabled"
      FREE
         IRQ = 14
         IRQ = 15
         PORT = 1F0h-1F7h
         PORT = 3F6h
         PORT = 3F7h
	    SHARE = YES
         PORT = 170h-177h
         PORT = 376h-377h
	 INIT = CMOS(9) LOC (5) 1
	 INIT = CMOS(19) LOC (6-4) 001
   CHOICE = "Primary enabled, secondary enabled (DMA)"
      FREE
         IRQ = 14
         IRQ = 15
         DMA = 7
         PORT = 1F0h-1F7h
         PORT = 3F6h
         PORT = 3F7h
	    SHARE = YES
         PORT = 170h-177h
         PORT = 376h-377h
	 INIT = CMOS(9) LOC (5) 1
	 INIT = CMOS(19) LOC (6-4) 101
   CHOICE = "Prim. enabled (DMA), sec. enabled (DMA)"
      FREE
         IRQ = 14
         IRQ = 15
         DMA = 6
         DMA = 7
         PORT = 1F0h-1F7h
         PORT = 3F6h
         PORT = 3F7h
	    SHARE = YES
         PORT = 170h-177h
         PORT = 376h-377h
	 INIT = CMOS(9) LOC (5) 1
	 INIT = CMOS(19) LOC (6-4) 111
 
GROUP = "Motherboard memory"
   TYPE = "MEM"

FUNCTION = "Moduls"
   HELP = " The total amount of onboard memory can be set to different values.\n
            The amount of memory depends on the kind of SIMM-modules used and\n
            the number of banks filled with memory (set by dipswitches 1 to 3).\n
            One of five options can be selected.\n
	    þ 1 bank of 1 MByte SIMMs                          Ä 8 MByte\n
	    þ 2 banks of 1 MByte SIMMs                         Ä 16 MByte\n
	    þ 1 bank of 4 MByte SIMMs                          Ä 32 MByte\n
	    þ 1 bank of 1 MByte SIMMs, 1 bank of 4 MByte SIMMs Ä 40 MByte\n
	    þ 2 banks of 4 MByte SIMMs                         Ä 64 MByte\n"
   CHOICE = " 8 MByte (8 x 1MByte SIMMs)"
      FREE
         MEMORY = 7M
            ADDRESS = 100000h
	    CACHE = YES
	 INIT = CMOS(4) 00000000
	 INIT = CMOS(5) 00011100
         INIT = SWITCH(1) LOC(3-1) 101
   CHOICE = "16 MByte (16 x 1MByte SIMMs)"
      FREE
         MEMORY = 15M
            ADDRESS = 100000h
	    CACHE = YES
	 INIT = CMOS(4) 00000000
	 INIT = CMOS(5) 00111100
         INIT = SWITCH(1) LOC(3-1) 100
   CHOICE = "32 MByte (8 x 4MByte SIMMs)"
      FREE
         MEMORY = 31M
            ADDRESS = 100000h
	    CACHE = YES
	 INIT = CMOS(4) 00000000
	 INIT = CMOS(5) 01111100
         INIT = SWITCH(1) LOC(3-1) 011
   CHOICE = "40 MByte (8 x 1MByte, 8 x 4MByte SIMMs)"
      FREE
         MEMORY = 39M
            ADDRESS = 100000h
	    CACHE = YES
	 INIT = CMOS(4) 00000000
	 INIT = CMOS(5) 10011100
         INIT = SWITCH(1) LOC(3-1) 001
   CHOICE = "64 MByte (16 x 4MByte SIMMs)"
      FREE
         MEMORY = 63M
            ADDRESS = 100000h
	    CACHE = YES
	 INIT = CMOS(4) 00000000
	 INIT = CMOS(5) 11111100
         INIT = SWITCH(1) LOC(3-1) 010

FUNCTION = "Standard"
   SHOW = EXP
   HELP = " This option is only useful if less than 640 Kbyte of memory must\n
            be enabled."
   CHOICE = "640 kB"
      FREE
         MEMORY = 640k
            ADDRESS = 000000h
	    CACHE = YES
	 INIT = CMOS(10) 10000000
	 INIT = CMOS(11) 00000010
	 INIT = CMOS(2) 10000000
	 INIT = CMOS(3) 00000010
   CHOICE = "512 kB"
      FREE
         MEMORY = 512k
            ADDRESS = 000000h
	    CACHE = YES
	 INIT = CMOS(10) 00000000
	 INIT = CMOS(11) 00000010
	 INIT = CMOS(2) 00000000
	 INIT = CMOS(3) 00000010
   CHOICE = "256 kB"
      FREE
         MEMORY = 256k
            ADDRESS = 000000h
	    CACHE = YES
	 INIT = CMOS(10) 00000000
	 INIT = CMOS(11) 00000001
	 INIT = CMOS(2) 00000000
	 INIT = CMOS(3) 00000001
ENDGROUP

FUNCTION = "Embedded VGA"
   TYPE = "VID"
   HELP = " The Embedded Video Controller can be set to different modes or it\n
            can be disabled.\n
            þ Enabled - MDA: Onboard VGA Controller emulates MDA.\n
            þ Enabled - CGA: Onboard VGA Controller emulates CGA.\n
            þ Enabled - Hercules: Onboard VGA Controller emulates Hercules.\n
            þ Enabled - EGA: Onboard VGA Controller emulates EGA.\n
            þ Enabled - VGA: Onboard VGA Controller is enabled.\n
            þ Disabled: Onboard VGA Controller is disabled. You need a add-in\n
                  \t    video board."
   CHOICE = "Enabled - Mode: VGA"
      FREE
         MEMORY = 128k
            ADDRESS = 0A0000h
	    CACHE = NO
	    MEMTYPE = OTH
	    SIZE = WORD
         MEMORY = 32k
            ADDRESS = 0C0000h
	    CACHE = YES
	    MEMTYPE = OTH
	    SIZE = DWORD
	    WRITABLE = NO
         PORT = 0102h
         PORT = 03C0h-03C2h
         PORT = 03C4h-03C9h
         PORT = 03CCh
         PORT = 03CEh-03CFh
         PORT = 46E8h
	    SHARE = YES
         PORT = 03B4h-03B5h
         PORT = 03B9h-03BAh
         PORT = 03D4h-03D5h
         PORT = 03D9h-03DAh
	 INIT = CMOS(9) LOC (2) 1
	 INIT = CMOS(14) LOC (5-2) 0000
   CHOICE = "Enabled - Mode: MDA"
      FREE
         MEMORY = 128k
            ADDRESS = 0A0000h
	    CACHE = NO
	    MEMTYPE = OTH
	    SIZE = WORD
         MEMORY = 32k
            ADDRESS = 0C0000h
	    CACHE = YES
	    MEMTYPE = OTH
	    SIZE = DWORD
	    WRITABLE = NO
         PORT = 0102h
         PORT = 03C0h-03C2h
         PORT = 03C4h-03C9h
         PORT = 03CCh
         PORT = 03CEh-03CFh
         PORT = 46E8h
	    SHARE = YES
         PORT = 03B4h-03B5h
         PORT = 03B9h-03BAh
         PORT = 03D4h-03D5h
         PORT = 03D9h-03DAh
	 INIT = CMOS(9) LOC (2) 1
	 INIT = CMOS(14) LOC (5-2) 0001
   CHOICE = "Enabled - Mode: CGA"
      FREE
         MEMORY = 128k
            ADDRESS = 0A0000h
	    CACHE = NO
	    MEMTYPE = OTH
	    SIZE = WORD
         MEMORY = 32k
            ADDRESS = 0C0000h
	    CACHE = YES
	    MEMTYPE = OTH
	    SIZE = DWORD
	    WRITABLE = NO
         PORT = 0102h
         PORT = 03C0h-03C2h
         PORT = 03C4h-03C9h
         PORT = 03CCh
         PORT = 03CEh-03CFh
         PORT = 46E8h
	    SHARE = YES
         PORT = 03B4h-03B5h
         PORT = 03B9h-03BAh
         PORT = 03D4h-03D5h
         PORT = 03D9h-03DAh
	 INIT = CMOS(9) LOC (2) 1
	 INIT = CMOS(14) LOC (5-2) 0011
   CHOICE = "Enabled - Mode: Hercules"
      FREE
         MEMORY = 128k
            ADDRESS = 0A0000h
	    CACHE = NO
	    MEMTYPE = OTH
	    SIZE = WORD
         MEMORY = 32k
            ADDRESS = 0C0000h
	    CACHE = YES
	    MEMTYPE = OTH
	    SIZE = DWORD
	    WRITABLE = NO
         PORT = 0102h
         PORT = 03C0h-03C2h
         PORT = 03C4h-03C9h
         PORT = 03CCh
         PORT = 03CEh-03CFh
         PORT = 46E8h
	    SHARE = YES
         PORT = 03B4h-03B5h
         PORT = 03B9h-03BAh
         PORT = 03D4h-03D5h
         PORT = 03D9h-03DAh
	 INIT = CMOS(9) LOC (2) 1
	 INIT = CMOS(14) LOC (5-2) 0100
   CHOICE = "Enabled - Mode: EGA"
      FREE
         MEMORY = 128k
            ADDRESS = 0A0000h
	    CACHE = NO
	    MEMTYPE = OTH
	    SIZE = WORD
         MEMORY = 32k
            ADDRESS = 0C0000h
	    CACHE = YES
	    MEMTYPE = OTH
	    SIZE = DWORD
	    WRITABLE = NO
         PORT = 0102h
         PORT = 03C0h-03C2h
         PORT = 03C4h-03C9h
         PORT = 03CCh
         PORT = 03CEh-03CFh
         PORT = 46E8h
	    SHARE = YES
         PORT = 03B4h-03B5h
         PORT = 03B9h-03BAh
         PORT = 03D4h-03D5h
         PORT = 03D9h-03DAh
	 INIT = CMOS(9) LOC (2) 1
	 INIT = CMOS(14) LOC (5-2) 0101
   CHOICE = "Disabled"
      DISABLE = YES
      FREE
	 INIT = CMOS(9) LOC (2) 0

FUNCTION = "System Serial Port #1"
   TYPE = "COM,ASY"
   HELP = " The First Serial Port on the systemboard (9P) can be set to COM1,\n
            COM2, COM3, COM4 or it can be disabled."
   CHOICE = "Assigned to COM1"
      SUBTYPE = "COM1"
      FREE
         IRQ = 4
         PORT = 3F8h-3FFh
	 INIT = CMOS(15) 11111110
	 INIT = CMOS(18) LOC (5-4) 10
	 INIT = CMOS(8) LOC (1) 0
   CHOICE = "Assigned to COM2"
      SUBTYPE = "COM2"
      FREE
         IRQ = 3
         PORT = 2F8h-2FFh
	 INIT = CMOS(15) 10111110
	 INIT = CMOS(18) LOC (7-6) 10
	 INIT = CMOS(8) LOC (1) 0
   CHOICE = "Assigned to COM3"
      SUBTYPE = "COM3"
      FREE
         PORT = 2E8h-2EFh
	 INIT = CMOS(15) 10111010
	 INIT = CMOS(8) LOC (1) 0
   CHOICE = "Assigned to COM4"
      SUBTYPE = "COM4"
      FREE
         PORT = 2E0h-2E7h
	 INIT = CMOS(15) 10111000
	 INIT = CMOS(8) LOC (1) 0
   CHOICE = "Disabled"
      DISABLE = YES
      FREE
	 INIT = CMOS(8) LOC (1) 1

FUNCTION = "System Serial Port #2"
   TYPE = "COM,ASY"
   HELP = " The Second Serial Port on the systemboard (25P) can be set to COM1,\n
            COM2, COM3, COM4 or it can be disabled."
   CHOICE = "Assigned to COM2"
      SUBTYPE = "COM2"
      FREE
         IRQ = 3
         PORT = 2F8h-2FFh
	 INIT = CMOS(16) 10111110
	 INIT = CMOS(18) LOC (7-6) 11
	 INIT = CMOS(8) LOC (2) 0
   CHOICE = "Assigned to COM1"
      SUBTYPE = "COM1"
      FREE
         IRQ = 4
         PORT = 3F8h-3FFh
	 INIT = CMOS(16) 11111110
	 INIT = CMOS(18) LOC (5-4) 11
	 INIT = CMOS(8) LOC (2) 0
   CHOICE = "Assigned to COM3"
      SUBTYPE = "COM3"
      FREE
         PORT = 2E8h-2EFh
	 INIT = CMOS(16) 10111010
	 INIT = CMOS(8) LOC (2) 0
   CHOICE = "Assigned to COM4"
      SUBTYPE = "COM4"
      FREE
         PORT = 2E0h-2E7h
	 INIT = CMOS(16) 10111000
	 INIT = CMOS(8) LOC (2) 0
   CHOICE = "Disabled"
      DISABLE = YES
      FREE
	 INIT = CMOS(8) LOC (2) 1

FUNCTION = "System Parallel Port"
   TYPE = "PAR"
   HELP = " The System Parallel (or Printer) Port can be set to address 378h\n
            (LPT1), 278h (LPT2) or it can be disabled."
   CHOICE = "Assigned as LPT1 (378h + IRQ7)"
      SUBTYPE = "LPT1"
      FREE
         IRQ = 7
         PORT = 378h-37Fh
	 INIT = CMOS(17) 11011110
	 INIT = CMOS(18) LOC (1-0) 11
	 INIT = CMOS(8) LOC(3) 0
   CHOICE = "Assigned as LPT2 (278h + IRQ5)"
      SUBTYPE = "LPT2"
      FREE
         IRQ = 5
         PORT = 278h-27Fh
	 INIT = CMOS(17) 10011110
	 INIT = CMOS(18) LOC (1-0) 11
	 INIT = CMOS(8) LOC(3) 0
   CHOICE = "Disabled"
      DISABLE = YES
      FREE
	 INIT = CMOS(8) LOC(3) 1

FUNCTION = "Novell UPS interface"
   TYPE = "NET"
   HELP = " With the Novell compatible UPS interface, an Uninterruptible Power\n
	    Supply can be connected to the system. The interface is compatible\n
	    with the Novell SS-keycard/UPS-monitor board. It uses two bits of\n
	    I/O-port 230h to sense two signals. The polarity of each signal can\n
            be set separately to active-high (normal) or active-low (inverse).\n
            The two signals are:\n
            þ AP - Auxiliary Power active\n
            þ BL - Battery Low"
   CHOICE = "Disabled"
      DISABLE = YES
      FREE
	 INIT = CMOS(7) LOC(7) 0
   CHOICE = "AP-signal normal, BL-signal normal"
      FREE
	 PORT = 230h
	 INIT = CMOS(7) LOC(1 2 7) 001
   CHOICE = "AP-signal normal, BL-signal inverse"
      FREE
	 PORT = 230h
	 INIT = CMOS(7) LOC(1 2 7) 011
   CHOICE = "AP-signal inverse, BL-signal normal"
      FREE
	 PORT = 230h
	 INIT = CMOS(7) LOC(1 2 7) 101
   CHOICE = "AP-signal inverse, BL-signal inverse"
      FREE
	 PORT = 230h
	 INIT = CMOS(7) LOC(1 2 7) 111

FUNCTION = "Batteries"
   TYPE = "OTH"
   HELP = " It is possible to use normal batteries or rechargeable batteries.\n
	    The kind of batteries used is set by means of dipswitch 5."
   CHOICE = "Normal batteries"
      FREE
	 INIT = SWITCH(1) LOC(5) 0
   CHOICE = "Rechargeable batteries"
      FREE
	 INIT = SWITCH(1) LOC(5) 1

FUNCTION = "Software Generated NMI"
   SHOW = EXP
   HELP = " This item enables or disables software Non-maskable Interrupt\n
            (NMI) generation."
   CHOICE = "Disabled"
      FREE
         INIT = IOPORT(1) LOC (1) 0
   CHOICE = "Enabled"
      FREE
         INIT = IOPORT(1) LOC (1) 1

FUNCTION = "Fail-Safe Timer NMI"
   SHOW = EXP
   HELP = " This item enables or disables fail-safe timer Non-maskable Interrupt\n
            (NMI) generation."
   CHOICE = "Disabled"
      FREE
         INIT = IOPORT(1) LOC (2) 0
   CHOICE = "Enabled"
      FREE
         INIT = IOPORT(1) LOC (2) 1

FUNCTION = "Bus-Master Timeout NMI"
   SHOW = EXP
   HELP = " This item enables or disables bus timeout Non-Maskable Interrupt\n
            (NMI) generation."
   CHOICE = "Disabled"
      FREE
         INIT = IOPORT(1) LOC (3) 0
   CHOICE = "Enabled"
      FREE
         INIT = IOPORT(1) LOC (3) 1

FUNCTION = "80486 internal cache control"
   SHOW = EXP
   HELP = " This item enables or disables the 486 CPU internal cache."
   CHOICE = "Enabled"
      FREE
	 INIT = CMOS(6) LOC (5) 0
   CHOICE = "Disabled"
      FREE
	 INIT = CMOS(6) LOC (5) 1

FUNCTION = "Fast I/O"
   SHOW = EXP
   HELP = " This item enables or disables the Fast I/O feature."
   CHOICE = "Disabled"
      FREE
	 INIT = CMOS(14) LOC (6) 0
   CHOICE = "Enabled"
      FREE
	 INIT = CMOS(14) LOC (6) 1