; Copyright (c) TCC 1991.  All rights reserved. 
; No part may be reproduced, transmitted, transcribed, stored in retrieval
; system, or translated into any language or computer language, in any form
; or by any means, electronic, mechanical, magnetic, optical, manual,
; or otherwise, without prior written permission of TCC.
;
; Configuration file for the Video Seven 16-bit VGA Adpater
; @[#]TCC0220      1.40                            91/10/22

;=== Maintenance History =====================================================
;
;Rev   Date     Name Comment
;----  --------  --  ----------------------------------------------
;1.40  22.10.91  DM  Removed non-English help instructions
;1.30  30.09.91  TF  Text edits for release.
;1.20  06.06.90  TJF Change to 32K memory block sizes from 6K or 24K.
;                    Done for shadow performance reasons.
;1.10  21.05.90  DM  Added what string support
;1.00  14.05.90  DM  Initial release
;
BOARD
  ID = "TCC0220"
  NAME = "Video Seven 16-bit FastWrite VGA Adapter"
  MFR = "Video Seven"
  CATEGORY = "VID"
  SLOT = ISA16
  LENGTH = 200

  SWITCH(1) = 8
    STYPE = DIP
    NAME = "SW1"
    VERTICAL = NO
    REVERSE = YES
    LABEL = LOC(1-8) "Reserved" "Reserved" "Reserved" "FastWrite" "Emul On" "16-bit ROM" "16-bit MEM" "Extd VGA"
    FACTORY = LOC(1-8) 00001110
    INITVAL = LOC(5) 1

  JUMPER(1) = 2
    JTYPE = INLINE
    NAME = "JMP1"
    REVERSE = YES
    LABEL = LOC (1^2 2^3) "Disabled" "Enabled"
    FACTORY = LOC(1^2 2^3) 01

  FUNCTION = "Video Seven Fastwrite VGA"
    TYPE = "VID"
    SUBFUNCTION = "ROM Access"
      CHOICE = "16-bit ROM (128K Address Space)"
        FREE
          MEMORY = 32K
            ADDRESS = 0C0000h
            WRITABLE = NO
            MEMTYPE = SYS
            SIZE = WORD
            DECODE = 24
            CACHE = YES
            SHARE = NO
              INIT = SWITCH(1) LOC(6) 1

      CHOICE = "8-bit ROM (32K Address Space)"
        FREE
          MEMORY = 32K				;R1.20 (was 24K)
            ADDRESS = 0C0000h
            WRITABLE = NO
            MEMTYPE = SYS
            SIZE = BYTE
            CACHE = YES
            SHARE = NO
              INIT = SWITCH(1) LOC(6) 0
;       FREE					; R1.20 block deleted.
;         MEMORY = 6K
;           ADDRESS = 0C6800h
;           MEMTYPE = SYS
;           CACHE = YES
;           WRITABLE = NO

    SUBFUNCTION = "RAM Access"
      CHOICE = "16-bit RAM"
        FREE
          INIT = SWITCH(1) LOC(7) 1
      CHOICE = "8-bit RAM"
        FREE
          INIT = SWITCH(1) LOC(7) 0

    SUBFUNCTION = "Extended Mode Availability"
      CHOICE = "Allow Extended Modes"
        FREE
          PORT = 03C0h-03CFh
            INIT = SWITCH(1) LOC(8) 0
      CHOICE = "Allow Only VGA Modes"
        FREE
          PORT = 03C0h-03CFh
            INIT = SWITCH(1) LOC(8) 1

    SUBFUNCTION = "Vertical Retrace Interrupt"
      CHOICE = "Enable Interrupt"
        FREE
          IRQ = 2
            INIT = JUMPER(1) LOC(1^2 2^3) 01
      CHOICE = "Disable Interrupt"
        FREE
          INIT = JUMPER(1) LOC(1^2 2^3) 10

    SUBFUNCTION = "Video Mode"
      CHOICE = "Graphics: Color or Mono"
        FREE
          PORT = 03B0h-03BBh
          PORT = 03D0h-03DFh
        FREE
          MEMORY = 128K
            ADDRESS = 0A0000h
            MEMTYPE = OTH
  
      CHOICE = "Graphics: Mono"
        FREE
          PORT = 03B0h-03BBh
        FREE
          MEMORY = 96K
            ADDRESS = 0A0000h
            MEMTYPE = OTH
  
      CHOICE = "Text Only: Color or Mono"
        FREE
          PORT = 03B0h-03BBh
           PORT = 03D0h-03DFh
        FREE
          MEMORY = 64K
            ADDRESS = 0B0000h
            MEMTYPE = OTH
  
      CHOICE = "Text Only: Mono"
        FREE
          PORT = 03B0h-03BBh
        FREE
          MEMORY = 32K
            ADDRESS = 0B0000h
            MEMTYPE = OTH

    SUBFUNCTION  =  "Monitor Type"
      TYPE  =  "VID"
      CHOICE = "VGA Analog"
        FREE
          INIT = SWITCH(1) LOC(1-3) 000
      CHOICE = "NEC Multisync, NANAO"
        FREE
          INIT = SWITCH(1) LOC(1-3) 100
      CHOICE = "Sony Multiscan"
        FREE
          INIT = SWITCH(1) LOC(1-3) 010
      CHOICE = "VGA Analog Color"
        FREE
          INIT = SWITCH(1) LOC(1-3) 001
      CHOICE = "NEC Multisync Plus, XL"
        FREE
          INIT = SWITCH(1) LOC(1-3) 110