; Copyright (c) TCC 1991.  All rights reserved. 
; No part may be reproduced, transmitted, transcribed, stored in retrieval
; system, or translated into any language or computer language, in any form
; or by any means, electronic, mechanical, magnetic, optical, manual,
; or otherwise, without prior written permission of TCC.
;
; Configuration file for the UltraStor 12/32 ESDI controller.
; @[#]TCC0115      1.80                            91/10/22

;=== Maintenance History =====================================================
;
;Rev   Date     Name Comment
;----  --------  --  ----------------------------------------------
;1.80  22.10.91  DM  Removed non-English help instructions
;1.70  30.09.91  TF  Text edits for release.
;1.60  19.06.90  TF  Fixed secondary port address selection.
;1.50  15.06.90  BB  Fixed jumper settings, deleted redundant settings
;1.40  21.05.90  DM  Added what string support
;1.30  02.05.90  DM  Re-structured, linkfrees
;1.20  15.03.90  DM  Removed secondary floppy options
;1.10  25.01.90  DM  Added jumper settings/added more messages
;1.00  01.01.90  DM  Initial release
;
BOARD
  ID = "TCC0115"
  NAME = "UltraStor 12F/32 ESDI Controller"
  MFR = "UltraStor Corp."
  CATEGORY = "MSD"
  SLOT = ISA16
  LENGTH = 330
  SKIRT = NO
  READID = NO

  JUMPER (1)  =  1
    NAME = "JP1 Coresidency"
    JTYPE = PAIRED
    VERTICAL = NO
    REVERSE = NO
    LABEL = LOC(1) "Primary"
    FACTORY = LOC(1) 0
    COMMENTS = "This jumper enables the board to co-reside with another  
controller.  The default value is 'not installed' for Primary operation."

  JUMPER (2)  =  1
    NAME = "JP2 Factory"
    JTYPE = PAIRED
    VERTICAL = YES
    REVERSE = NO
    LABEL = LOC(1)"Reserved"
    FACTORY = LOC(1) 0

  JUMPER (3)  =  1
    NAME = "JP3 Factory"
    JTYPE = PAIRED
    VERTICAL = NO
    REVERSE = NO
    LABEL = LOC(1)"Reserved"
    FACTORY = LOC(1) 1
    INITVAL = LOC(1) 1

  JUMPER (4)  =   2
    NAME = "JP4 Cache Disable"
    JTYPE = PAIRED
    VERTICAL = YES
    REVERSE = NO
    LABEL = LOC(1-2) "Reserved" "No Cache"
    FACTORY = LOC(1-2) 10
    INITVAL = LOC(1-2) 10

  JUMPER (5)  =  2
    NAME = "JP5 Buffer Select"
    JTYPE = INLINE
    VERTICAL = YES
    REVERSE = YES
    LABEL = LOC(1^2 2^3) "32K Buffer" "8K Buffer"
    FACTORY = LOC(1^2) 1
    INITVAL = LOC(1^2) 1
    COMMENTS = "This jumper selects the buffer size."

  JUMPER (6)  =  2
    NAME = "JP6 Buffer Select"
    JTYPE = INLINE
    VERTICAL = YES
    REVERSE = YES
    LABEL = LOC(1^2 2^3) "8/32K Bufr" "Reserved"
    COMMENTS = "This jumper selects the buffer size.  Jumper option
 1-2 should be installed for 8/32K Buffer size.  Jumper option
 2-3 is reserved and should not be installed."

  JUMPER (7)  =  2
    NAME = "JP7 Factory"
    JTYPE = INLINE
    VERTICAL = YES
    REVERSE = YES
    LABEL = LOC(1-2) "Reserved" "Reserved"
    COMMENTS = "This solder pad for factory use only and should be
 not installed."

  JUMPER (9)  =  8
    NAME = "JP9"
    JTYPE = PAIRED
    VERTICAL = NO
    REVERSE = YES
    LABEL = LOC(1-8) "Reserved" "Reserved" "Reserved" "Reserved" "Reserved" "Reserved" "Reserved" "Reserved"
    COMMENTS = "This jumper is for factory use only and should be
 not installed."

  JUMPER (10)  =  3
    NAME = "JP10 BIOS Address"
    JTYPE = PAIRED
    VERTICAL = YES
    REVERSE = YES
    LABEL = LOC(1-3) "D400:0" "CC00:0" "C800:0"
    COMMENTS = "This jumper selects the BIOS configuration."

  JUMPER (11) = 6
    NAME = "JP11 Floppy Jumper"
    JTYPE = PAIRED
    VERTICAL = NO
    REVERSE = YES
    LABEL = LOC(1-6) "DS2/DS4" "Drv 1 Type" "Drv 0 Type" "Prim/Sec" "Speed Ctl" "Precomp"
    FACTORY = LOC(1-6) 000000
    COMMENTS = "This jumper configures the floppy controller.\n
    Consult the manual for detailed information."

  JUMPER (12) = 1
    NAME = "JP12 HD IO Port"
    JTYPE = PAIRED
    VERTICAL = YES
    REVERSE = YES
    LABEL = LOC(1) "Primary"
    FACTORY = LOC(1) 0

  JUMPER (16) = 1
    NAME = "JP16 Logic Ground"
    JTYPE = PAIRED
    VERTICAL = NO
    REVERSE = YES
    LABEL = LOC(1) "No Chassis"
    FACTORY = LOC(1) 0

  JUMPER (17) = 1
    NAME = "JP17 Floppy Enable"
    JTYPE = PAIRED
    VERTICAL = NO
    REVERSE = YES
    LABEL = LOC(1) "Enable"
    FACTORY = LOC(1) 0
 
  JUMPER(20)  =  2
    NAME = "J20 HD IRQ Select"
    JTYPE = INLINE
    VERTICAL = NO
    REVERSE = YES
    LABEL = LOC(1^2 2^3) "IRQ 15" "IRQ 14"
    FACTORY = LOC(2^3) 1
    COMMENTS = "This jumper selects the Interrupt Request line
 for the hard disk controller.  The default value is IRQ 14."


  FUNCTION = "Ultrastor ESDI Controller"
    TYPE = "MSD,DSKCTL"
    COMMENTS = "Be sure to check your configuration."
    CHOICE = "Primary Port Address 1F0h"
      FREE
        PORT = 1F0h-1F7h
          SHARE = NO
      LINK
        IRQ = 14 | 15
          TRIGGER = EDGE
          SHARE = NO
          INIT = JUMPER(12) LOC(1) 0 | 1
          INIT = JUMPER(20) LOC(1-2) 01 | 10
      LINK
        MEMORY = 16K | 16K | 16K
          ADDRESS = 0C8000h | 0D0000h | 0D8000h
          WRITABLE = YES
          MEMTYPE = OTH
          CACHE = YES
          SHARE = NO
          INIT = JUMPER(10) LOC(1-3) 001 | 011 | 101
    CHOICE = "Secondary Port Address 170h"
      FREE
        PORT = 170h-177h
          SHARE = NO
      LINK
        IRQ = 14 | 15
          TRIGGER = EDGE
          SHARE = NO
          INIT = JUMPER(12) LOC(1) 0 | 1
          INIT = JUMPER(20) LOC(1-2) 01 | 10
      LINK
        MEMORY = 16K | 16K | 16K
          ADDRESS = 0DC000h | 0CC000h | 0D4000h
          WRITABLE = YES
          MEMTYPE = OTH
          CACHE = YES
          SHARE = NO
          INIT = JUMPER(10) LOC(1-3) 110 | 010 | 100

  FUNCTION = "Ultrastor Floppy Controller"
    TYPE = "MSD,FLPYCTL"
    CHOICE = "Disabled"
      FREE
        INIT = JUMPER(17) LOC(1) 0
    CHOICE = "Primary"
      FREE
        PORT = 3F0h-3F7h
        DMA = 2
        IRQ = 6
          TRIGGER = EDGE
        INIT = JUMPER(11) LOC(4) 0
        INIT = JUMPER(17) LOC(1) 1