; Copyright (c) TCC 1991.  All rights reserved. 
; No part may be reproduced, transmitted, transcribed, stored in retrieval
; system, or translated into any language or computer language, in any form
; or by any means, electronic, mechanical, magnetic, optical, manual,
; or otherwise, without prior written permission of TCC.
;
; Configuration file for the Adaptec 1540B SCSI host adapter
; @[#]TCC0105      1.60                            91/10/22

;=== Maintenance History =====================================================
;
;Rev   Date     Name Comment
;----  --------  --  ----------------------------------------------
;1.60  22.10.91  DM  Removed non-English help instructions
;1.50  30.09.91  TF  Text edits for release.
;1.40  19.06.90  TF  Corrected WHAT string info.
;1.30  15.06.90  BB  Fixed jumper settings and a label
;1.20  21.05.90  DM  Added what string support
;1.10  02.05.90  DM  Fixed linkfrees, default choices, shadowing
;1.01  10.04.90  DM  Added size defs to DMA and IO ports
;1.00  09.04.90  DM  Initial release
;
BOARD
  ID = "TCC0105"
  NAME = "Adaptec AHA-1540B/1542B SCSI Host Adapter"
  MFR = "Adaptec, Inc."
  CATEGORY = "MSD"
  SLOT = ISA16
  LENGTH = 150
  SKIRT = NO
  READID = NO

JUMPER (5) = 13
  NAME = "J5 Assorted Jumper"
  JTYPE = PAIRED
  VERTICAL = NO
  REVERSE = YES
  LABEL = LOC(13-1) "DMA 6.7 MB" "DMA 5.7 MB" "IRQ 14" "IRQ 11" "IRQ 10" "DMA 5" "DMA 6" "SCSI Addr" "SCSI Addr" "SCSI Addr" "Bus Parity" "Diagnostic" "Sync Xfer"
  FACTORY = LOC(13-1) 0001010000000

JUMPER (6) = 5
  NAME = "J6 AT BIOS Enable"
  JTYPE = PAIRED
  VERTICAL = NO
  REVERSE =YES
  LABEL = LOC(5-1) "Auto Sense" "Spare" "Spare" "Spare" "Enable"
  FACTORY = LOC(5-1) 00001

JUMPER (7) = 8
  NAME = "J7 Assorted Jumper"
  JTYPE = PAIRED
  VERTICAL = YES
  REVERSE = YES
  LABEL = LOC(1-8) "Flop Sec." "Port 330h" "Port 234h" "Port 134h" "100ns Wait" "200ns Wait" "BIOS CC000" "BIOS D8000"
  FACTORY = LOC(1-8) 00000010

JUMPER (8) = 8
  NAME = "J8 Floppy Jumper"
  JTYPE = PAIRED
  VERTICAL = NO
  REVERSE = YES
  LABEL = LOC(8-1) "Dual Speed" "IRQ 10" "IRQ 6" "DACK 3" "DACK 2" "DREQ 3" "DREQ 2" "Flpy Enabl"
  FACTORY = LOC(8-1) 00000001

JUMPER (9) = 14
  NAME = "J9 DMA/IRQ"
  JTYPE = PAIRED
  VERTICAL = NO
  REVERSE = YES
  LABEL = LOC(14-1) "IRQ 15" "IRQ 14" "IRQ 12" "IRQ 11" "IRQ 10" "IRQ 9" "DACK 7" "DACK 6" "DACK 5" "DACK 0" "DREQ 7" "DREQ 6" "DREQ 5" "DREQ 0"
  FACTORY = LOC(14-1)  00010000100010

;Function descriptions start here

FUNCTION = "Adaptec SCSI Controller"
  TYPE="MSD,HDCTL"
  HELP="Only one Default Function Should be in effect."

  SUBFUNCTION="SCSI Controller Configuration"
    CHOICE = "Primary- IRQ 11, IO 330, DMA 5"
      FREE
        IRQ = 11
          SHARE = NO
          TRIGGER = EDGE
          INIT = JUMPER(5) LOC(11-9) 010
          INIT = JUMPER(9) LOC(14-9) 000100
        PORT = 330h-333h
          SHARE = NO
          SIZE = WORD
          INIT = JUMPER(7) LOC(4-2) 001
        DMA = 5
          SHARE = NO
          SIZE = WORD
          TIMING = TYPEA
          INIT = JUMPER(5) LOC(8-7) 10
          INIT = JUMPER(9) LOC(8-1) 00100010
    CHOICE = "Secondary- IRQ 10, IO 334, DMA 7"
      FREE
        IRQ = 10
          SHARE = NO
          TRIGGER = EDGE
          INIT = JUMPER(5) LOC(11-9) 001
          INIT = JUMPER(9) LOC(14-9) 000010
        PORT = 334h-337h
          SHARE = NO
          SIZE = WORD
          INIT = JUMPER(7) LOC(4-2) 000          
        DMA = 7
          SHARE = NO
          SIZE = WORD
          TIMING = TYPEA
          INIT = JUMPER(5) LOC(8-7) 00
          INIT = JUMPER(9) LOC(8-1) 10001000
    CHOICE="User Configured"
      LINK
        IRQ = 9 | 10 | 11 | 12 | 14 | 15
          SHARE = NO
          TRIGGER = EDGE
          INIT = JUMPER(5) LOC(11-9) 000 | 001 | 010 | 011 | 100 | 101
          INIT = JUMPER(9) LOC(9-14) 100000 | 010000 | 001000 | 000100 | 000010 | 000001
      LINK
        DMA = 0 | 5 | 6 | 7
          SHARE = NO
          SIZE = WORD
          TIMING = TYPEA
          INIT = JUMPER(5) LOC(8-7) 11 | 10 | 01 | 00
          INIT = JUMPER(9) LOC(1-8) 10001000 | 01000100 | 00100010 | 00010001
      LINK
        PORT = 130h-133h | 134h-137h | 230h-233h | 234h-237h | 330h-333h | 334h-337h
          SHARE = NO
          SIZE = WORD
          INIT = JUMPER(7) LOC(4-2) 101 | 001 | 110 | 010 | 100 | 000

  SUBFUNCTION = "SCSI ROM Configuration"
    COMMENTS = "ROM must be disabled on 2nd controller in system"
    CHOICE = "ROM Enabled"
      COMBINE
        MEMORY = 16K
          ADDRESS = 0DC000h | 0C8000h | 0CC000h | 0D8000h
          WRITABLE = NO
          MEMTYPE = SYS
          CACHE = YES
          SHARE = NO
          INIT = JUMPER(7) LOC(7-8) 00 | 11 | 10 | 01
          INIT = JUMPER(6) LOC(1) 1 | 1 | 1 | 1
    CHOICE = "ROM Disabled"
      DISABLE = YES
      FREE
        INIT = JUMPER(6) LOC(1) 0         
        INIT = JUMPER(7) LOC(8-7) 00

FUNCTION = "Adaptec Floppy Controller"
  TYPE="MSD,FLPYCTL"
  HELP="Only one Default Function Should be in effect."

  SUBFUNCTION = "Floppy Configuration"
    CHOICE = "Disabled"
      FREE
        INIT = JUMPER(8) LOC(1) 0
    CHOICE = "Primary- IRQ 6, IO 3F0, DMA 2"
      FREE
        IRQ = 6
          SHARE = NO
          TRIGGER = EDGE
          INIT = JUMPER(8) LOC(3-2) 10
        DMA = 2
          SHARE = NO
          SIZE = WORD
          INIT = JUMPER(8) LOC(5-2) 0101
        PORT = 3F0h-3F7h
          SHARE = NO
          SIZE = WORD
          INIT = JUMPER(8) LOC(1) 1
          INIT = JUMPER(7) LOC(1) 0
    CHOICE="User Configured Floppy"
      FREE
	INIT = JUMPER(8) LOC(1) 1
      LINK
        IRQ = 6 | 10
          TRIGGER = EDGE
          INIT = JUMPER(8) LOC(7-6) 01 | 10
      LINK
        DMA = 2 | 3
          SHARE = NO
          SIZE = WORD
          INIT = JUMPER(8) LOC(5-2) 0101 | 1010
      LINK
        PORT = 3F0h-3F7h | 370h-377h 
        SHARE = NO
        SIZE = WORD
          INIT = JUMPER(7) LOC(1) 0 | 1