;
; Copyright Schneider & Koch & Co. Datensysteme GmbH 1991
; Revision 1.4
;

BOARD
   ID       = "SuK1072"
   NAME     = "SK-FDDI FI LAN Interface Board"
   MFR      = "Schneider & Koch GmbH"
   CATEGORY = "NET"
   SLOT     = ISA16
   LENGTH   = 190
   COMMENTS = "SK-FDDI FI Board:\n
                        product-number 11-11-072"

JUMPER(1) = 1
   NAME     = "W1"
   JTYPE    = PAIRED
   REVERSE  = YES
   FACTORY  = LOC(1) 0
   COMMENTS = "
 Different AT vendors make different usage of the SA 17..SA 19 address lines.
 If the pins are not connected as by the default setting, it is compatible
 with the original IBM AT. If the jumper connected the pins, it is compatible
 with COMPAQ PC."



SWITCH(1) = 8
   NAME     = "W2"
   STYPE    = DIP
   REVERSE  = YES
   FACTORY  = LOC(1-8) 00000000
   COMMENTS = "
 W2.1 - W2.3 set I/O Base Address\n
 W2.4        enable/disable Boot ROM base address\n
 W2.5 - W2.8 set Memory Base Address"


SWITCH(2) = 8
   NAME     = "W3"
   STYPE    = DIP
   REVERSE  = YES
   FACTORY  = LOC(1-8) 00001100
   COMMENTS = "
 This switches determine the DMA channel"


SWITCH(3) = 8
   NAME     = "W4"
   STYPE    = DIP
   REVERSE  = YES
   FACTORY  = LOC(1-8) 00000001
   COMMENTS = "
 This DIP switch set the IRQ line"


SOFTWARE(1) = "
 The current settings of your SK-FDDI FI Network Interface Card are:\n"

FUNCTION = "FDDI Adapter"
   TYPE = "NET"
   CONNECTION  = "One ODL by class B board, two ODL by class A Board."


   SUBFUNCTION = "Choose Usage of SA17..SA19"
      CHOICE = "IBM AT Compatible"
        LINK
            INIT = JUMPER(1) LOC(1) 0
            INIT = SOFTWARE(1) "NIC uses SA17.. SA19"
      CHOICE = "Others"
        LINK
            INIT = JUMPER(1) LOC(1) 1
            INIT = SOFTWARE(1) "No use of SA17..SA19"


   SUBFUNCTION = "I/O Address"
      CHOICE = "0100h"
         LINK
            INIT = SWITCH(1) LOC(1-3) 000
            INIT = SOFTWARE(1) "I/O Base = 0100h"
      CHOICE = "0120h"
         LINK
            INIT = SWITCH(1) LOC(1-3) 001
            INIT = SOFTWARE(1) "I/O Base = 0120h"
      CHOICE = "0180h"
         LINK
            INIT = SWITCH(1) LOC(1-3) 010
            INIT = SOFTWARE(1) "I/O Base = 0180h"
      CHOICE = "0A10h"
         LINK
            INIT = SWITCH(1) LOC(1-3) 011
            INIT = SOFTWARE(1) "I/O Base = 0A10h"
      CHOICE = "0220h"
         LINK
            INIT = SWITCH(1) LOC(1-3) 100
            INIT = SOFTWARE(1) "I/O Base = 0220h"
      CHOICE = "0240h"
         LINK
            INIT = SWITCH(1) LOC(1-3) 101
            INIT = SOFTWARE(1) "I/O Base = 0220h"
      CHOICE = "0320h"
         LINK
            INIT = SWITCH(1) LOC(1-3) 110
            INIT = SOFTWARE(1) "I/O Base = 0320h"
      CHOICE = "0340h"
         LINK
            INIT = SWITCH(1) LOC(1-3) 111
            INIT = SOFTWARE(1) "I/O Base = 0340h"


   SUBFUNCTION = "Boot PROM"
      CHOICE = "disable"
         LINK
            INIT = SWITCH(1) LOC(4) 0
            INIT = SOFTWARE(1) "Boot FPROM Disable"
      CHOICE = "enable"
         LINK
            INIT = SWITCH(1) LOC(4) 1
            INIT = SOFTWARE(1) "Boot FPROM Enable"

   SUBFUNCTION = "Memory Base Address"
      CHOICE = "disable"
         DISABLE = YES
         FREE
            INIT = SWITCH(1) LOC(5-8) 0000
            INIT = SOFTWARE(1) "Base Address Disable"
      CHOICE = "DC000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0DC000h
            INIT = SWITCH(1) LOC(5-8) 0001
            INIT = SOFTWARE(1) "Base Address = DC000"
      CHOICE = "DA000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0DA000h
            INIT = SWITCH(1) LOC(5-8) 0010
            INIT = SOFTWARE(1) "Base Address = DA000"
      CHOICE = "D8000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0D8000h
            INIT = SWITCH(1) LOC(5-8) 0011
            INIT = SOFTWARE(1) "Base Address = D8000"
      CHOICE = "D6000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0D6000h
            INIT = SWITCH(1) LOC(5-8) 0100
            INIT = SOFTWARE(1) "Base Address = D6000"
      CHOICE = "D4000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0D4000h
            INIT = SWITCH(1) LOC(5-8) 0101
            INIT = SOFTWARE(1) "Base Address = D4000"
      CHOICE = "D2000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0D2000h
            INIT = SWITCH(1) LOC(5-8) 0110
            INIT = SOFTWARE(1) "Base Address = D2000"
      CHOICE = "D0000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0D0000h
            INIT = SWITCH(1) LOC(5-8) 0111
            INIT = SOFTWARE(1) "Base Address = D0000"
      CHOICE = "CE000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0CE000h
            INIT = SWITCH(1) LOC(5-8) 1000
            INIT = SOFTWARE(1) "Base Address = CE000"
      CHOICE = "CC000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0CC000h
            INIT = SWITCH(1) LOC(5-8) 1001
            INIT = SOFTWARE(1) "Base Address = CC000"
      CHOICE = "CA000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0CA000h
            INIT = SWITCH(1) LOC(5-8) 1010
            INIT = SOFTWARE(1) "Base Address = CA000"
      CHOICE = "C8000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0C8000h
            INIT = SWITCH(1) LOC(5-8) 1011
            INIT = SOFTWARE(1) "Base Address = C8000"
      CHOICE = "C6000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0C6000h
            INIT = SWITCH(1) LOC(5-8) 1100
            INIT = SOFTWARE(1) "Base Address = C6000"
      CHOICE = "C4000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0C4000h
            INIT = SWITCH(1) LOC(5-8) 1101
            INIT = SOFTWARE(1) "Base Address = C4000"
      CHOICE = "C2000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0C2000h
            INIT = SWITCH(1) LOC(5-8) 1110
            INIT = SOFTWARE(1) "Base Address = C2000"
      CHOICE = "C0000"
         LINK
            MEMORY  = 8K
            ADDRESS = 0C0000h
            INIT = SWITCH(1) LOC(5-8) 1111


   SUBFUNCTION = "DMA Channel"

      CHOICE = "DMA 5"
         LINK
            INIT = SWITCH(2) LOC(1-8) 00001100
            INIT = SOFTWARE(1) "DMA = 5"
      CHOICE = "DMA 6"
         LINK
            INIT = SWITCH(2) LOC(1-8) 00110000
            INIT = SOFTWARE(1) "DMA = 6"
      CHOICE = "DMA 7"
         LINK
            INIT = SWITCH(2) LOC(1-8) 11000000
            INIT = SOFTWARE(1) "DMA = 7"
      CHOICE = "DMA 3"
         LINK
            INIT = SWITCH(2) LOC(1-8) 00000011
            INIT = SOFTWARE(1) "DMA = 3"


   SUBFUNCTION = "IRQ Line"
      CHOICE = "IRQ 9"
         LINK
            IRQ = 9
            INIT = SWITCH(3) LOC(1-8) 00000001
            INIT = SOFTWARE(1) "IRQ = 9"
      CHOICE = "IRQ 3"
          LINK
            IRQ = 3
            INIT = SWITCH(3) LOC(1-8) 00001000
            INIT = SOFTWARE(1) "IRQ = 3"
      CHOICE = "IRQ 4"
         LINK
            IRQ = 4
            INIT = SWITCH(3) LOC(1-8) 00000100
            INIT = SOFTWARE(1) "IRQ = 4"
      CHOICE = "IRQ 5"
         LINK
            IRQ = 5
            INIT = SWITCH(3) LOC(1-8) 00000010
            INIT = SOFTWARE(1) "IRQ = 5"
      CHOICE = "IRQ 10"
         LINK
            IRQ = 10
            INIT = SWITCH(3) LOC(1-8) 00010000
            INIT = SOFTWARE(1) "IRQ = 10"
      CHOICE = "IRQ 11"
         LINK
            IRQ = 11
            INIT = SWITCH(3) LOC(1-8) 00100000
            INIT = SOFTWARE(1) "IRQ = 11"
      CHOICE = "IRQ 12"
         LINK
            IRQ = 12
            INIT = SWITCH(3) LOC(1-8) 01000000
            INIT = SOFTWARE(1) "IRQ = 12"
      CHOICE = "IRQ 15"
         LINK
            IRQ = 15
            INIT = SWITCH(3) LOC(1-8) 10000000
            INIT = SOFTWARE(1) "IRQ = 15"