BOARD
  ID = "STL0120"
  NAME = "Stallion Technologies - ONboard ISA"
  MFR = "Stallion Technologies"
  CATEGORY = "COM"
  SLOT = ISA16
  READID = no
  AMPERAGE = 2000
  COMMENTS = "
    The installation of software specific to the operating system is required.
    See Stallion Technologies documentation.
  "

IOPORT(1) = PORTVAR(1)
IOPORT(2) = PORTVAR(2)
  INITVAL = LOC(7 6 2 0) 0000


SWITCH(1) = 4
  NAME = "I/O Address Select"
  STYPE = DIP
  VERTICAL = NO
  REVERSE = YES
  FACTORY = LOC(1-4) 1011


FUNCTION = "ONboard Configuration"
  TYPE = "COM,SER"

  SUBFUNCTION = "I/O Address"
    HELP = "I/O address of board selected by DIP switch"

    CHOICE = "200"
      PORTVAR(1) = 201h
      PORTVAR(2) = 202h
      LINK
        PORT = 200H-20Fh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 1111

    CHOICE = "210"
      PORTVAR(1) = 211h
      PORTVAR(2) = 212h
      LINK
        PORT = 210H-21Fh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 1110

    CHOICE = "220"
      PORTVAR(1) = 221h
      PORTVAR(2) = 222h
      LINK
        PORT = 220H-22Fh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 1101

    CHOICE = "230"
      PORTVAR(1) = 231h
      PORTVAR(2) = 232h
      LINK
        PORT = 230H-23Fh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 1100

    CHOICE = "240"
      PORTVAR(1) = 241h
      PORTVAR(2) = 242h
      LINK
        PORT = 240H-24Fh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 1011

    CHOICE = "250"
      PORTVAR(1) = 251h
      PORTVAR(2) = 252h
      LINK
        PORT = 250H-25Fh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 1010

    CHOICE = "260"
      PORTVAR(1) = 261h
      PORTVAR(2) = 262h
      LINK
        PORT = 260H-26Fh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 1001

    CHOICE = "270"
      PORTVAR(1) = 271h
      PORTVAR(2) = 272h
      LINK
        PORT = 270H-27Fh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 1000

    CHOICE = "280"
      PORTVAR(1) = 218h
      PORTVAR(2) = 282h
      LINK
        PORT = 280H-28Fh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 0111

    CHOICE = "290"
      PORTVAR(1) = 291h
      PORTVAR(2) = 292h
      LINK
        PORT = 290H-29Fh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 0110

    CHOICE = "2A0"
      PORTVAR(1) = 2A1h
      PORTVAR(2) = 2A2h
      LINK
        PORT = 2A0H-2AFh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 0101

    CHOICE = "2B0"
      PORTVAR(1) = 2B1h
      PORTVAR(2) = 2B2h
      LINK
        PORT = 2B0H-2BFh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 0100

    CHOICE = "2C0"
      PORTVAR(1) = 2C1h
      PORTVAR(2) = 2C2h
      LINK
        PORT = 2C0H-2CFh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 0011

    CHOICE = "2D0"
      PORTVAR(1) = 2D1h
      PORTVAR(2) = 2D2h
      LINK
        PORT = 2D0H-2DFh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 0010

    CHOICE = "2E0"
      PORTVAR(1) = 2E1h
      PORTVAR(2) = 2E2h
      LINK
        PORT = 2E0H-2EFh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 0001

    CHOICE = "2F0"
      PORTVAR(1) = 2F1h
      PORTVAR(2) = 2F2h
      LINK
        PORT = 2F0H-2FFh
          SHARE = NO
          SIZE = BYTE
        INIT = SWITCH(1) LOC(1-4) 0000


  SUBFUNCTION = "Dual-Ported RAM Address"

    CHOICE = "Between A0000 and F0000"
      HELP = "Supported by OS/2, Novell AIO & NAS, and DOS"
      LINK
        MEMORY = 64K
          INIT = IOPORT(2) LOC(1) 0
          ADDRESS = 0A0000h-0f0000h STEP = 64K
          MEMTYPE = OTH
          DECODE = 20
		  SIZE = BYTE
          SHARE = "STL0120"
        INIT = IOPORT(1) LOC(7-0) 00001010-00001111

    CHOICE = "Between 1Meg and 16Meg"
      HELP = "Supported by OS/2 and Novell AIO & NAS"
      LINK
        MEMORY = 64K
          INIT = IOPORT(2) LOC(1) 1
          ADDRESS = 000100000h-000ff0000h STEP = 64K
          MEMTYPE = OTH
          DECODE = 24
		  SIZE = BYTE
          SHARE = "STL0120"
        INIT = IOPORT(1) LOC(7-0) 00010000-11111111


  SUBFUNCTION = "Interrupt Request"

    CHOICE = "Enable: Edge Trigger"
      HELP = "Interrupts are used. (OS/2)"
      LINK
        IRQ = 15 | 12 | 11 | 10 | 7 | 5 | 4 | 3
          TRIGGER = EDGE
        INIT = IOPORT(2) LOC(5-3) 011 | 001 | 010 | 000 | 111 | 101 | 110 | 100

    CHOICE = "Disable"
      HELP = "Interrupts are not used. (DOS, Novell AIO & NAS)"