;
; Star Gate Technologies Inc. - ACL (64kk)
;

BOARD
	ID="SGT0901"
	NAME="ACL - Serial Card w/64k RAM"
	MFR="Star Gate"
	CATEGORY="COM"
	SLOT=ISA8
	LENGTH=330
	SKIRT=NO
	READID=NO
	COMMENTS="Star Gate ACL with 64k dual port RAM."
	HELP="Star Gate ACL with 64k dual port RAM."

SWITCH(1)=8
	NAME="SW2"
	STYPE=DIP
	VERTICAL=NO
	REVERSE=YES
	LABEL=LOC(1-8) "latch" "irq2" "irq3" "irq4" "irq5" "irq6" "irq7" "latch"
	FACTORY=LOC(1-8)00000000
	COMMENTS="This switch is located just above the gold plated
 edge connector.  Positions 1 and 8 are used to set the ACL I/O latch address,
 while positions 2-7 are used to select the IRQ level."
	HELP="This switch is located just above the gold plated
 edge connector.  Positions 1 and 8 are used to set the ACL I/O latch address,
 while positions 2-7 are used to select the IRQ level."

	
JUMPER(1)=2
	NAME="JP2"
	JTYPE=INLINE
	VERTICAL=NO
	LABEL=LOC(1^2 2^3) "XT" "AT"
	REVERSE=YES
	FACTORY=LOC(1^2 2^3) 01
	INITVAL=LOC(1^2 2^3) 01
	COMMENTS="This jumper is located on the upper left corner of the
board, just above U11. This jumper is set for use in an AT-style machine
at the factory and should only be changed if the board will be used in an
 IBM PC or XT."
	HELP="This jumper is located on the upper left corner of the
board, just above U11. This jumper is set for use in an AT-style machine
at the factory and should only be changed if the board will be used in an
 IBM PC or XT."

FUNCTION="IRQ Level"
	TYPE="COM,ASY"
	COMMENTS=" The ACL can be configured to use IRQs 2,3,4,5,6,7."
	HELP=" The ACL can be configured to use IRQs 2,3,4,5,6,7."
	CHOICE="Select IRQ Level"
            LINK
		IRQ=2 | 3 | 4 | 5 | 6 | 7
		SHARE=NO
		INIT=SWITCH(1) LOC(1-8) x100000x | x010000x | x001000x | x000100x | x000010x | x000001x

	CHOICE="Disable IRQ"
		DISABLE=YES
	    FREE
		INIT=SWITCH(1) LOC(1-8) x000000x

FUNCTION="I/O Latch Address"
	CHOICE="Set I/O Latch Address"
	    LINK
		PORT=0200h | 0300h | 0600h | 0700h
		SHARE=NO
		INIT=SWITCH(1) LOC(1-8) 0xxxxxx0 | 1xxxxxx0 | 0xxxxxx1 | 1xxxxxx1

FUNCTION="Dual Port RAM Segment Address"
	CHOICE="Select RAM Segment Address"
	    FREE
		MEMORY=64K
		ADDRESS=0A0000h-0E0000h STEP=64K
		WRITABLE=YES
		SIZE=BYTE
		MEMTYPE=OTHER
		SHARE=NO