;
; Star Gate Technologies Inc. - Plus 8 (4 port)
;

BOARD
	ID="SGT0001"
	NAME="Plus 8 - 4 Port Serial Card"
	MFR="Star Gate"
	CATEGORY="COM"
	SLOT=ISA8
	LENGTH=330
	SKIRT=NO
	READID=NO
	COMMENTS="Star Gate Plus 8 - 4 Port Serial Card"
	HELP="Star Gate Plus 8 - 4 Port Serial Card"

SWITCH(1)=8
	NAME="SW1"
	STYPE=DIP
	VERTICAL=NO
	REVERSE=YES
	LABEL = LOC(1-8) "irq2" "irq3" "irq4" "irq5" "irq6" "irq7" "Norm/DOS" "pri/sec"
	FACTORY=LOC(1-8)00000000
	COMMENTS="This switch is located just above the gold plated
 edge connector.  Positions 1-6 are used to select the IRQ level, position
7 selects Normal or DOS mode, position 8 selects primary or secondary I/O
address map."
	HELP="This switch is located just above the gold plated
 edge connector.  Positions 1-6 are used to select the IRQ level, position
7 selects Normal or DOS mode, position 8 selects primary or secondary I/O
address map."
	
JUMPER(1)=2
	NAME="JP1"
	JTYPE=INLINE
	VERTICAL=NO
	FACTORY=LOC(1^2) 1
	COMMENTS="This jumper determines whether hardware flow control
 is supported for all 8 ports or only the first port. When installed
flow control is supported on Port 1 ONLY."
	HELP="This jumper determines whether hardware flow control
 is supported for all 8 ports or only the first port. When installed
flow control is supported on Port 1 ONLY."

FUNCTION="IRQ Level"
	TYPE="COM,ASY"
	COMMENTS=" The Plus 8 can be configured to use IRQs 2,3,4,5,6,7.
 You should select an IRQ level that is not in use by any other adapter
in the system."
	HELP=" The Plus 8 can be configured to use IRQs 2,3,4,5,6,7.
 You should select an IRQ level that is not in use by any other adapter
in the system."

	CHOICE="Normal Mode"
            LINK
		IRQ=2 | 3 | 4 | 5 | 6 | 7
		INIT=SWITCH(1) LOC(1-7) 1000001 | 0100001 | 0010001 | 0001001 | 0000101 | 0000011

	CHOICE="DOS/BASICA Compatible Mode"
	    FREE
	    	IRQ=4
		IRQ=3
		INIT=SWITCH(1) LOC(1-7) 0110000

	CHOICE="Disable IRQ"
		DISABLE=YES
	    FREE
		INIT=SWITCH(1) LOC(1-7) 000000x

FUNCTION="I/O Address Map"
	CHOICE="Primary Map (Standard)"
	    FREE
		INIT=SWITCH(1) LOC(8) 1
		PORT=3f8h-3feh			; PORT 1, COM 1
		SIZE=BYTE
		SHARE=NO
		PORT=2f8h-2feh			; PORT 2, COM 2
		SIZE=BYTE
		SHARE=NO
		PORT=280h-286h			; PORT 3
		SIZE=BYTE
		SHARE=NO
		PORT=288h-28eh			; PORT 4
		SIZE=BYTE
		SHARE=NO
		PORT=7f8h			; ISR
		SIZE=BYTE
		SHARE=NO
		
	CHOICE="Secondary Map (Standard)"
	    FREE
		INIT=SWITCH(1) LOC(8) 0
		PORT=180h-186h			; PORT 1
		SIZE=BYTE
		SHARE=NO
		PORT=188h-18eh			; PORT 2
		SIZE=BYTE
		SHARE=NO
		PORT=190h-196h			; PORT 3
		SIZE=BYTE
		SHARE=NO
		PORT=198h-19eh			; PORT 4
		SIZE=BYTE
		SHARE=NO
		PORT=580h			; ISR
		SIZE=BYTE
		SHARE=NO
		
	CHOICE="Primary Map (XENIX)"
	    FREE
		INIT=SWITCH(1) LOC(8) 1
		PORT=190h-196h			; PORT 1
		SIZE=BYTE
		SHARE=NO
		PORT=198h-19Eh			; PORT 2
		SIZE=BYTE
		SHARE=NO
		PORT=1A0h-1A6h			; PORT 3
		SIZE=BYTE
		SHARE=NO
		PORT=1A8h-1AEh			; PORT 4
		SIZE=BYTE
		SHARE=NO
		PORT=1D0h			; ISR
		SIZE=BYTE
		SHARE=NO
		
	CHOICE="Secondary Map (XENIX)"
	    FREE
		INIT=SWITCH(1) LOC(8) 0
		PORT=290h-296h			; PORT 1
		SIZE=BYTE
		SHARE=NO
		PORT=298h-29Eh			; PORT 2
		SIZE=BYTE
		SHARE=NO
		PORT=2A0h-2A6h			; PORT 3
		SIZE=BYTE
		SHARE=NO
		PORT=2A8h-2AEh			; PORT 4
		SIZE=BYTE
		SHARE=NO
		PORT=2D0h			; ISR
		SIZE=BYTE
		SHARE=NO
		
	CHOICE="Primary Map (PC-MOS)"
	    FREE
		INIT=SWITCH(1) LOC(8) 1
		PORT=3f8h-3feh			; PORT 1
		SIZE=BYTE
		SHARE=NO
		PORT=2f8h-2feh			; PORT 2
		SIZE=BYTE
		SHARE=NO
		PORT=3E8h-3EEh			; PORT 3
		SIZE=BYTE
		SHARE=NO
		PORT=2E8h-2EEh			; PORT 4
		SIZE=BYTE
		SHARE=NO
		PORT=0FF8h			; ISR
		SIZE=BYTE
		SHARE=NO
		
	CHOICE="Secondary Map (PC-MOS)"
	    FREE
		INIT=SWITCH(1) LOC(8) 0
		PORT=6A0h-6A6h			; PORT 1
		SIZE=BYTE
		SHARE=NO
		PORT=6A8h-6AEh			; PORT 2
		SIZE=BYTE
		SHARE=NO
		PORT=7E8h-7EEh			; PORT 3
		SIZE=BYTE
		SHARE=NO
		PORT=6E8h-6EEh			; PORT 4
		SIZE=BYTE
		SHARE=NO
		PORT=0EF8h			; ISR
		SIZE=BYTE
		SHARE=NO