;
;LCU 3299 - MW 3270 Coax A 3299 Adapter
;

BOARD
   ID = "OLIF101"
   NAME = "Olivetti LCU 3299 - MW 3270 Coax A 3299 Adapter"
   MFR = "I.T.I."
   CATEGORY = "COM"
   SLOT = ISA8
   LENGTH = 336
   COMMENTS =
"This board is shipped with the two I/O
jumpers ( J1 for I/O in disabled state
and J2 for IRQ ).
If you change the I/O register address
the LOADGEN command line in the batch
file to load microcode must be changed.
See direction on manual.
On MW 3270 Environment this operation is
done by configurator."

JUMPER(1) = 4
   JTYPE = paired
   NAME = "J1"
   REVERSE = yes
   LABEL = LOC(1 2 3 4) "1" "2" "3" "4"
   COMMENTS =
"Default 224 MCR I/O Address (2D0-2DF
I/O Address ) "

JUMPER(2) = 6
   JTYPE = paired
   NAME = "J2"
   REVERSE = yes
   LABEL = LOC(1 2 3 4 5 6) "IRQ 2" "3" "4" "5" "6" "7"
   FACTORY = LOC(1-6) 100000
   COMMENTS =
"Factory IRQ 2 selection. If a conflit
does occour the IRQ jumper can be
changed from default 2 to 7."

FUNCTION = "3299 Emulation"
   CHOICE = "I/O ports and IRQ"
      LINK
         PORT = 0224h
         PORT = 02d0h-02dfh  STEP = 1  COUNT = 16
         INIT = JUMPER(1) LOC(1 2 3 4) 0000
      LINK
         IRQ = 2 | 3 | 4 | 5 | 6 | 7
         INIT = JUMPER(2) LOC(1 2 3 4 5 6) 100000 | 010000 | 001000 | 000100 | 000010 | 000001