BOARD
  ID = "NIC1200"
  NAME = "AT-AO-6/10 ANALOG OUTPUT BOARD"
  MFR = "NATIONAL INSTR CORP"
  CATEGORY = "OTH"
  SLOT = ISA16
  READID = NO
  COMMENTS = "The National Instruments AT-AO-6/10 is a high-performance
      analog output board.  The AT-AO-6/10 has either 6 or 10 identical
      DAC channels, each of which has a 4 to 20 mA current output and
      voltage output.  An 8-bit DIO port provides additional control
      capability."

SWITCH(1) = 5
   NAME = "Base I/O Address"
   STYPE = DIP
   VERTICAL = NO
   REVERSE = YES
   LABEL = LOC(1-5) "A9" "A8" "A7" "A6" "A5"
   FACTORY = LOC(1-5) 01110
   COMMENTS = "The base I/O address is determined by the settings of the
         board dip switches.  The factory setting is for base address 01C0h."

JUMPER(1) = 6
	NAME = "DMA Channels (W22)"
	JTYPE = PAIRED
	VERTICAL = YES
	REVERSE = YES
	LABEL = LOC(1-6) "DRQ5" "DACK5" "DRQ6" "DACK6" "DRQ7" "DACK7"
	FACTORY = LOC(1-6) 110000
	COMMENTS = "The DMA channels used is determined by this jumper. 
		    Note that both DRQ(Request) and DACK(Acknowledge) jumpers must 
		    be set to the same channel if that channel is to be used."

JUMPER(2) = 8
	NAME = "DMA Chans 0-3 (W24)"
	JTYPE = PAIRED
	VERTICAL = NO
	REVERSE = YES
	LABEL = LOC(1-8) "DRQ0" "DACK0" "DRQ1" "DACK1" "DRQ2" "DACK2" "DRQ3" "DACK3"
	FACTORY = LOC(1-8) 00000000
	COMMENTS = "The DMA channels used are determined by this jumper and
                    by jumper W22. This jumper selects from DMA channels 0, 1, 
                    2 and 3. Jumper W22 selects from channels 5 through 7. 
		    Note that both DRQ(Request) and DACK(Acknowledge) jumpers must 
		    be set to the same channel if that channel is to be used."

JUMPER(3) = 11
	NAME = "IRQ Levels (W23)"
	JTYPE = TRIPOLE
	VERTICAL = NO
	REVERSE = YES
	LABEL = LOC(1-11) "15" "14" "12" "11" "10" "09" "07" "06" "05" "04" "03"
	FACTORY = LOC(1-11) NN01NNNNNNN
	COMMENTS = "The interrupt levels used are determined by this jumper.
		    Do not use interrupt levels 6 or 14 as they are 
		    normally used by the diskette and hard disk controllers."

FUNCTION = "AT-AO-6/10 Base I/O Address"
   COMMENTS = "The base I/O address selected through this resource."
	HELP = "The base I/O address entered here must match the board 
		dip switch setting for the base address. See the user's 
		manual of the board for more information."
	CHOICE = "Base I/O address Resource"
		SUBCHOICE
		FREE
			PORT = 1C0h-3E0h STEP = 020h
			SHARE = NO
			INIT = SWITCH(1) LOC(1-5) 
                        01110 | 01111 | 10000 | 10001 | 10010 | 
                        10011 | 10100 | 10101 | 10110 | 10111 | 
                        11000 | 11001 | 11010 | 11011 | 11100 | 
                        11101 | 11110 | 11111  

		SUBCHOICE
		FREE
			PORT = 000h-1A0h STEP = 020h
			SHARE = NO
			INIT = SWITCH(1) LOC(1-5) 
                        00000 | 00001 | 00010 |	00011 | 00100 | 
                        00101 | 00110 | 00111 |	01000 | 01001 | 
                        01010 | 01011 | 01100 |	01101

FUNCTION = "AT-AO-6/10 DMA Channel"
	COMMENTS = "The DMA channel is selected through this function. If
		    the 'Disabled' option is selected, the driver will not
		    use the DMA resource."
	HELP = "The DMA channel selected here must match the board jumper
 		settings for the DMA channel. See the user's manual of the 
		board for more information."

	CHOICE = "DMA = 5"
        FREE
		DMA = 5
		   SHARE = NO
		   SIZE = WORD
         TIMING = DEFAULT
      INIT = JUMPER(1) LOC(1-6) 110000
      INIT = JUMPER(2) LOC(1-8) 00000000 

	CHOICE = "DMA = 6"
        FREE
		DMA = 6
		   SHARE = NO
		   SIZE = WORD
         TIMING = DEFAULT
      INIT = JUMPER(1) LOC(1-6) 001100
      INIT = JUMPER(2) LOC(1-8) 00000000

	CHOICE = "DMA = 7"
        FREE
		DMA = 7
		   SHARE = NO
		   SIZE = WORD
         TIMING = DEFAULT
      INIT = JUMPER(1) LOC(1-6) 000011
      INIT = JUMPER(2) LOC(1-8) 00000000

	CHOICE = "Disabled"
        FREE
      INIT = JUMPER(1) LOC(1-6) 000000
      INIT = JUMPER(2) LOC(1-8) 00000000

	CHOICE = "DMA = 0"
        FREE
		DMA = 0
		   SHARE = NO
		   SIZE = WORD
         TIMING = DEFAULT
      INIT = JUMPER(1) LOC(1-6) 000000
      INIT = JUMPER(2) LOC(1-8) 11000000

	CHOICE = "DMA = 1"
        FREE
		DMA = 1
		   SHARE = NO
		   SIZE = WORD
         TIMING = DEFAULT
      INIT = JUMPER(1) LOC(1-6) 000000
      INIT = JUMPER(2) LOC(1-8) 00110000

	CHOICE = "DMA = 2"
        FREE
		DMA = 2
		   SHARE = NO
		   SIZE = WORD
         TIMING = DEFAULT
      INIT = JUMPER(1) LOC(1-6) 000000
      INIT = JUMPER(2) LOC(1-8) 00001100

	CHOICE = "DMA = 3"
        FREE
		DMA = 3
		   SHARE = NO
		   SIZE = WORD
         TIMING = DEFAULT
      INIT = JUMPER(1) LOC(1-6) 000000
      INIT = JUMPER(2) LOC(1-8) 00000011


FUNCTION = "AT-AO-6/10 Interrupt Request Levels"
	COMMENTS = "The interrupt levels are selected through this function.
          If the 'Disabled' option is selected, the driver will not
		    use the interrupt resource."
	HELP = "The interrupt levels selected here must match the board jumper
 		settings for the interrupt levels. See the user's manual of the 
		board for more information."
;SHARE statement in the choices is omitted as default is NO
;TRIGGER statement in the choices is omitted as default is EDGE
	CHOICE = "INT1 and INT2 enabled"

        COMBINE
	IRQ = 11 | 10 |  9 | 7 | 6 | 5 | 4 | 3 | 15 | 14 | 12
	IRQ = 12 | 11 | 10 | 9 | 7 | 6 | 5 | 4 |  3 | 15 | 14 
        INIT = JUMPER(3) LOC(1-11) 
        NN01NNNNNNN | NNN1NNNNNNN | NNN10NNNNNN | NNN1N0NNNNN | 
        NNN1NN0NNNN | NNN1NNN0NNN | NNN1NNNN0NN | NNN1NNNNN0N | 
        NNN1NNNNNN0 | 0NN1NNNNNNN | N0N1NNNNNNN |

        NN0N1NNNNNN | NNN01NNNNNN | NNNN1NNNNNN | NNNN10NNNNN | 
        NNNN1N0NNNN | NNNN1NN0NNN | NNNN1NNN0NN | NNNN1NNNN0N | 
        NNNN1NNNNN0 | 0NNN1NNNNNN | N0NN1NNNNNN | 

        NN0NN1NNNNN | NNN0N1NNNNN | NNNN01NNNNN | NNNNN1NNNNN | 
        NNNNN10NNNN | NNNNN1N0NNN | NNNNN1NN0NN | NNNNN1NNN0N | 
        NNNNN1NNNN0 | 0NNNN1NNNNN | N0NNN1NNNNN | 

        NN0NNN1NNNN | NNN0NN1NNNN | NNNN0N1NNNN | NNNNN01NNNN | 
        NNNNNN1NNNN | NNNNNN10NNN | NNNNNN1N0NN | NNNNNN1NN0N | 
        NNNNNN1NNN0 | 0NNNNN1NNNN | N0NNNN1NNNN | 

        NN0NNNN1NNN | NNN0NNN1NNN | NNNN0NN1NNN | NNNNN0N1NNN | 
        NNNNNN01NNN | NNNNNNN1NNN | NNNNNNN10NN | NNNNNNN1N0N | 
        NNNNNNN1NN0 | 0NNNNNN1NNN | N0NNNNN1NNN | 

        NN0NNNNN1NN | NNN0NNNN1NN | NNNN0NNN1NN | NNNNN0NN1NN | 
        NNNNNN0N1NN | NNNNNNN01NN | NNNNNNNN1NN | NNNNNNNN10N | 
        NNNNNNNN1N0 | 0NNNNNNN1NN | N0NNNNNN1NN | 

        NN0NNNNNN1N | NNN0NNNNN1N | NNNN0NNNN1N | NNNNN0NNN1N | 
        NNNNNN0NN1N | NNNNNNN0N1N | NNNNNNNN01N | NNNNNNNNN1N | 
        NNNNNNNNN10 | 0NNNNNNNN1N | N0NNNNNNN1N | 

        NN0NNNNNNN1 | NNN0NNNNNN1 | NNNN0NNNNN1 | NNNNN0NNNN1 | 
        NNNNNN0NNN1 | NNNNNNN0NN1 | NNNNNNNN0N1 | NNNNNNNNN01 | 
        NNNNNNNNNN1 | 0NNNNNNNNN1 | N0NNNNNNNN1 | 

        1N0NNNNNNNN | 1NN0NNNNNNN | 1NNN0NNNNNN | 1NNNN0NNNNN | 
        1NNNNN0NNNN | 1NNNNNN0NNN | 1NNNNNNN0NN | 1NNNNNNNN0N | 
        1NNNNNNNNN0 | 1NNNNNNNNNN | 10NNNNNNNNN | 

        N10NNNNNNNN | N1N0NNNNNNN | N1NN0NNNNNN | N1NNN0NNNNN | 
        N1NNNN0NNNN | N1NNNNN0NNN | N1NNNNNN0NN | N1NNNNNNN0N | 
        N1NNNNNNNN0 | 01NNNNNNNNN | N1NNNNNNNNN | 

        NN1NNNNNNNN | NN10NNNNNNN | NN1N0NNNNNN | NN1NN0NNNNN | 
        NN1NNN0NNNN | NN1NNNN0NNN | NN1NNNNN0NN | NN1NNNNNN0N | 
        NN1NNNNNNN0 | 0N1NNNNNNNN | N01NNNNNNNN



        CHOICE = "INT1 enabled"
        LINK
        IRQ = 11 | 10 | 9 | 7 | 6 | 5 | 4 | 3 | 15 | 14 | 12
	INIT = JUMPER(3) LOC(1-11)
        NNN1NNNNNNN | NNNN1NNNNNN | NNNNN1NNNNN | 
        NNNNNN1NNNN | NNNNNNN1NNN | NNNNNNNN1NN | 
        NNNNNNNNN1N | NNNNNNNNNN1 | 1NNNNNNNNNN | 
        N1NNNNNNNNN | NN1NNNNNNNN  
                 
	CHOICE = "INT2 enabled"
        LINK
        IRQ = 12 | 11 | 10 | 9 | 7 | 6 | 5 | 4 | 3 | 15 | 14 
	INIT = JUMPER(3) LOC(1-11)
        NN0NNNNNNNN | NNN0NNNNNNN | NNNN0NNNNNN | 
        NNNNN0NNNNN | NNNNNN0NNNN | NNNNNNN0NNN | 
        NNNNNNNN0NN | NNNNNNNNN0N | NNNNNNNNNN0 | 
        0NNNNNNNNNN | N0NNNNNNNNN   

	CHOICE = "INTS disabled"
        LINK
	INIT = JUMPER(3) LOC(1-11)
        NNNNNNNNNNN