BOARD
    ID = "NIC0800"
    NAME = "PC-LPM-16 Low Power Multi-function Board"
    MFR = "NATIONAL INSTR CORP"
    CATEGORY = "MFC"
    SLOT = ISA8
    READID = NO
    COMMENTS = "The PC-LPM-16 is a low power multi-function analog,
		digital and timing board."
    HELP = "The PC-LPM-16 contains a 12-bit A/D converter with 16 
        single-ended analog inputs, 16 lines of TTL-compatible digital 
        input and output, and three 16-bit counter/timer channels for 
        timing analog input"

SWITCH(1) = 5
    NAME = "Base I/O Address"
    STYPE = DIP
    VERTICAL = NO
    REVERSE = YES
    LABEL = LOC(1-5) "A9" "A8" "A7" "A6" "A5" 
    FACTORY = LOC(1-5) 10011
    COMMENTS = "The base I/O address is determined by the settings of the
            board's DIP switches. The factory setting is for base
            address 260h."

JUMPER(1) = 6
    NAME = "IRQ Level (W1)"
    JTYPE = PAIRED
    REVERSE = YES
    LABEL = LOC(1-6) "3" "4" "5" "6" "7" "9"
    FACTORY = LOC(3) 1
    COMMENTS = "The interrupt level used is determined by this jumper.
            Do not use interrupt level 6 as it is normally used by the
            diskette and hard disk controllers."

FUNCTION = "PC-LPM-16 Base I/O Address"
    COMMENTS = "The base I/O address is selected through this resource."
    HELP = "The base I/O address entered here must match the board's
        DIP switch setting for the base address. See the user's
        manual of the board for more information."
    CHOICE = "Base I/O Address Resource"
        SUBCHOICE
        FREE
            PORT = 260h-3ffh STEP = 020h COUNT = 16h
            SHARE = NO
            SIZE = BYTE
            INIT = SWITCH(1) LOC(1-5)  
                10011 | 10100 | 10101 | 10110 | 10111 | 11000 |
                11001 | 11010 | 11011 | 11100 | 11101 | 11110 |
                11111

        SUBCHOICE
        FREE
            PORT = 000h-240h STEP = 020h COUNT = 16h
            SHARE = NO
            SIZE = BYTE
            INIT = SWITCH(1) LOC(1-5)  00000 | 00001 | 00010 |
                00011 | 00100 | 00101 | 00110 | 00111 | 01000 |
                01001 | 01010 | 01011 | 01100 | 01101 | 01110 |
                01111 | 10000 | 10001 | 10010
FUNCTION = "PC-LPM-16 Interrupt Request Level"
    COMMENTS = "The interrupt level is selected through this function. If
            the 'Disabled' option is selected, the driver will not
            use the interrupt resource."
    HELP = "The interrupt level selected here must match the board's jumper
         setting for the interrupt level. See the user's manual of the
        board for more information."
;SHARE statement in the choices is omitted as default is NO
;TRIGGER statement in the choices is omitted as default is EDGE
    CHOICE = "5"
    FREE
        IRQ = 5
         INIT = JUMPER(1) LOC(1-6) 001000
    CHOICE = "6"
    FREE
        IRQ = 6
         INIT = JUMPER(1) LOC(1-6) 000100
    CHOICE = "7"
    FREE
        IRQ = 7
         INIT = JUMPER(1) LOC(1-6) 000010
    CHOICE = "9"
    FREE
        IRQ = 9
         INIT = JUMPER(1) LOC(1-6) 000001
    CHOICE = "Disabled"
        FREE
         INIT = JUMPER(1) LOC(1-6) 000000
    CHOICE = "3"
    FREE
        IRQ = 3
         INIT = JUMPER(1) LOC(1-6) 100000
    CHOICE = "4"
    FREE
        IRQ = 4
         INIT = JUMPER(1) LOC(1-6) 010000