BOARD
	ID = "NIC0602"
	NAME = "AT-MIO-16F-5 Multi-function Board"
	MFR = "NATIONAL INSTR CORP"
	CATEGORY = "MFC"
	SLOT = ISA16
	READID = NO
	COMMENTS = "The AT-MIO-16F-5 is a high-perfomance multi-function analog,
		    digital and timing input/output board."
	HELP = "The AT-MIO-16F-5 contains a 12-bit A/D converter with up to 16
		analog inputs, two 12-bit D/A converters with voltage outputs,
		eight lines of TTL compatible digital input and output, and three
		16-bit counter/timer channels for timing input and output."

SWITCH(1) = 5
	NAME = "Base I/O Address"
	STYPE = DIP
	VERTICAL = NO
	REVERSE = YES
	LABEL = LOC(1-5) "A9" "A8" "A7" "A6" "A5"
	FACTORY = LOC(1-5) 10001
	COMMENTS = "The base I/O address is determined by the settings of the
		    board dip switches. The factory setting is for base
		    address 0220h."

JUMPER(1) = 6
	NAME = "DMA Chans 5 - 7 (W4)"
	JTYPE = TRIPOLE
	VERTICAL = NO
	REVERSE = NO
	LABEL = LOC(6-1) "R7" "A7" "R6" "A6" "R5" "A5"
	FACTORY = LOC(6-1) 1100NN
	COMMENTS = "The DMA channels used are determined by this jumper and
                    by jumper W7. This jumper selects from DMA channels 5, 6 
                    and 7. Jumper W7 selects from channels 0 through 3. 
		    Note that both R(equest) and A(cknowledge) jumpers must 
		    be set to the same channel if that channel is to be used."

JUMPER(2) = 8
	NAME = "DMA Chans 0 - 3 (W7)"
	JTYPE = TRIPOLE
	VERTICAL = NO
	REVERSE = YES
	LABEL = LOC(1-8) "R0" "A0" "R1" "A1" "R2" "A2" "R3" "A3"
	FACTORY = LOC(1-8) NNNNNNNN
	COMMENTS = "The DMA channels used are determined by this jumper and
                    by jumper W4. This jumper selects from DMA channels 0, 1, 
                    2 and 3. Jumper W4 selects from channels 5 through 7. 
		    Note that both R(equest) and A(cknowledge) jumpers must 
		    be set to the same channel if that channel is to be used."

JUMPER(3) = 6
	NAME = "IRQs 9 - 15 (W5)"
	JTYPE = PAIRED
	VERTICAL = NO
	REVERSE = NO
	LABEL = LOC(6-1) "15" "14" "12" "11" "10" "09"
	FACTORY = LOC(2) 1
	COMMENTS = "The interrupt level used is determined by this jumper and
                    by jumper W6. This jumper selects from interrupt levels 9 -
                    12, 14 and 15. Jumper W6 selects from levels 3 through 7.
		    Do not use interrupt levels 6 or 14 as they are 
		    normally used by the diskette and hard disk controllers."

JUMPER(4) = 5
	NAME = "IRQs 3 - 7 (W6)"
	JTYPE = PAIRED
	VERTICAL = NO
	REVERSE = YES
	LABEL = LOC(1-5) "03" "04" "05" "06" "07"
	FACTORY = LOC(1-5) 00000
	COMMENTS = "The interrupt level used is determined by this jumper and
                    by jumper W5. This jumper selects from interrupt levels 3 -
                    7. Jumper W5 selects from levels 9 through 12, 14 and 15.
		    Do not use interrupt levels 6 or 14 as they are 
		    normally used by the diskette and hard disk controllers."

FUNCTION = "AT-MIO-16F-5 Base I/O Address"
	COMMENTS = "The base I/O address is selected through this resource."
	HELP = "The base I/O address entered here must match the board 
		dip switch setting for the base address. See the user's 
		manual of the board for more information."
	CHOICE = "Base I/O address Resource"
		SUBCHOICE
		FREE
			PORT = 220h-3FFh STEP = 020h
			SHARE = NO
			INIT = SWITCH(1) LOC(1-5) 10001 | 10010 | 10011 |
				10100 | 10101 | 10110 | 10111 | 11000 |
				11001 | 11010 | 11011 | 11100 | 11101 |
				11110 | 11111
		SUBCHOICE
		FREE
			PORT = 000h-220h STEP = 020h
			SHARE = NO
			INIT = SWITCH(1) LOC(1-5) 00000 | 00001 | 00010 |
				00011 | 00100 | 00101 | 00110 | 00111 |
				01000 | 01001 | 01010 | 01011 | 01100 |
				01101 | 01110 | 01111 | 10000

FUNCTION = "AT-MIO-16F-5 DMA Channels"
	COMMENTS = "The DMA channels are selected through this function. 
		    Either 2, 1 or no DMA channel resources will be required
                    if DMA A and B are enabled, just DMA A enabled or if DMA
                    is disabled, respectively."
	HELP = "The DMA channel selected here must match the board jumper
 		settings for the DMA channels. See the user's manual of the 
		board for more information."
	CHOICE = "DMA A and B enabled"
           COMBINE
                DMA = 6 | 5 | 3 | 2 | 1 | 0 | 7
		DMA = 7 | 6 | 5 | 3 | 2 | 1 | 0
		SHARE = NO
		SIZE = WORD
                TIMING = DEFAULT
		INIT = JUMPER(1) LOC(6-1)
                 1100NN | NN00NN | NN0011 | NN00NN | NN00NN | NN00NN | NN00NN
               | 11NN00 | NN1100 | NNNN00 | NNNN00 | NNNN00 | NNNN00 | NNNN00
               | 11NNNN | NN11NN | NNNN11 | NNNNNN | NNNNNN | NNNNNN | NNNNNN
               | 11NNNN | NN11NN | NNNN11 | NNNNNN | NNNNNN | NNNNNN | NNNNNN
               | 11NNNN | NN11NN | NNNN11 | NNNNNN | NNNNNN | NNNNNN | NNNNNN
               | 11NNNN | NN11NN | NNNN11 | NNNNNN | NNNNNN | NNNNNN | NNNNNN
               | 00NNNN | 0011NN | 00NN11 | 00NNNN | 00NNNN | 00NNNN | 00NNNN
		INIT = JUMPER(2) LOC(8-1)
   NNNNNNNN | NNNNNNNN | NNNNNNNN | NNNNNN11 | NNNN11NN | NN11NNNN | 11NNNNNN
 | NNNNNNNN | NNNNNNNN | NNNNNNNN | NNNNNN11 | NNNN11NN | NN11NNNN | 11NNNNNN
 | NNNNNN00 | NNNNNN00 | NNNNNN00 | NNNNNN00 | NNNN1100 | NN11NN00 | 11NNNN00
 | NNNN00NN | NNNN00NN | NNNN00NN | NNNN0011 | NNNN00NN | NN1100NN | 11NN00NN
 | NN00NNNN | NN00NNNN | NN00NNNN | NN00NN11 | NN0011NN | NN00NNNN | 1100NNNN
 | 00NNNNNN | 00NNNNNN | 00NNNNNN | 00NNNN11 | 00NN11NN | 0011NNNN | 00NNNNNN
 | NNNNNNNN | NNNNNNNN | NNNNNNNN | NNNNNN11 | NNNN11NN | NN11NNNN | 11NNNNNN
                                          
	CHOICE = "DMA A enabled"
           LINK
                DMA = 6 | 5 | 3 | 2 | 1 | 0 | 7
		SHARE = NO
		SIZE = WORD
                TIMING = DEFAULT
		INIT = JUMPER(1) LOC(6-1)
                   NN00NN | NNNN00 | NNNNNN | NNNNNN | NNNNNN | NNNNNN | 00NNNN
		INIT = JUMPER(2) LOC(8-1)
      NNNNNNNN | NNNNNNNN | NNNNNN00 | NNNN00NN | NN00NNNN | 00NNNNNN | NNNNNNNN
 
	CHOICE = "DMA disabled"
           LINK
		INIT = JUMPER(1) LOC(6-1)
                 NNNNNN | NNNNNN | NNNNNN | NNNNNN | NNNNNN | NNNNNN | NNNNNN
		INIT = JUMPER(2) LOC(8-1)
     NNNNNNNN | NNNNNNNN | NNNNNNNN | NNNNNNNN | NNNNNNNN | NNNNNNNN | NNNNNNNN

 FUNCTION = "AT-MIO-16F-5 Interrupt Request Level"
	COMMENTS = "The interrupt level is selected through this function. If
		    the 'Disabled' option is selected, the driver will not
		    use the interrupt resource."
	HELP = "The interrupt level selected here must match the board jumper
 		setting for the interrupt level. See the user's manual of the 
		board for more information."
;SHARE statement in the choices is omitted as default is NO
;TRIGGER statement in the choices is omitted as default is EDGE
	CHOICE = "10"
        FREE
		IRQ = 10
		INIT = JUMPER(3) LOC(6-1) 000010
		INIT = JUMPER(4) LOC(1-5) 00000
	CHOICE = "11"
        FREE
		IRQ = 11
		INIT = JUMPER(3) LOC(6-1) 000100
		INIT = JUMPER(4) LOC(1-5) 00000
	CHOICE = "12"
        FREE
		IRQ = 12
		INIT = JUMPER(3) LOC(6-1) 001000
		INIT = JUMPER(4) LOC(1-5) 00000
	CHOICE = "14"
        FREE
		IRQ = 14
		INIT = JUMPER(3) LOC(6-1) 010000
		INIT = JUMPER(4) LOC(1-5) 00000
	CHOICE = "15"
        FREE
		IRQ = 15
		INIT = JUMPER(3) LOC(6-1) 100000
		INIT = JUMPER(4) LOC(1-5) 00000
	CHOICE = "Disabled"
	FREE
		INIT = JUMPER(3) LOC(6-1) 000000
		INIT = JUMPER(4) LOC(1-5) 00000
	CHOICE = "3"
        FREE
		IRQ = 3 
		INIT = JUMPER(3) LOC(6-1) 000000
		INIT = JUMPER(4) LOC(1-5) 10000
	CHOICE = "4"
        FREE
		IRQ = 4
		INIT = JUMPER(3) LOC(6-1) 000000
		INIT = JUMPER(4) LOC(1-5) 01000
	CHOICE = "5"
        FREE
		IRQ = 5
		INIT = JUMPER(3) LOC(6-1) 000000
		INIT = JUMPER(4) LOC(1-5) 00100
	CHOICE = "6"
        FREE
		IRQ = 6
		INIT = JUMPER(3) LOC(6-1) 000000
		INIT = JUMPER(4) LOC(1-5) 00010
	CHOICE = "7"
        FREE
		IRQ = 7
		INIT = JUMPER(3) LOC(6-1) 000000
		INIT = JUMPER(4) LOC(1-5) 00001
	CHOICE = "9"
        FREE
		IRQ = 9
		INIT = JUMPER(3) LOC(6-1) 000001
		INIT = JUMPER(4) LOC(1-5) 00000