BOARD			
 ID="NET0002"
 MFR="NEC"
 NAME="NEC H450E/H4500E Memory Expansion Board"
 CATEGORY="MEM"
 SLOT=isa16
 LENGTH=330
 COMMENTS="The APC-H450E/H4500E is a 16-bit 512-KB Memory Expansion Board.  It
	contains 512K of RAM chips.  Additional memory up to 2.1MB can
	be added by installing up to 3 Memory Expansion Kits(APC H451).\n
        Up to 4 APC-H450E/H4500E boards can be installed on a system for a total
        of 8MB.  The H4500E is the International version."
;SOFTWARE(1)=""

SWITCH(1)=10
  NAME = "SW1 - Board 1"  
  STYPE = DIP
  VERTICAL = NO
  REVERSE = YES
  FACTORY = LOC(1-10)0000000000
  COMMENTS = "This is Switch 1 of the first Memory Expansion board installed
		in the system.  Up to 4 boards may be installed in the
		system.\n
		The first 5 positions of this switch define the address of
		the memory on the board.  The second 5 positions define the
		address of the next 512K of memory for the first expansion
		kit(H451)." 
SWITCH(2)=10
  NAME = "SW2 - Board 1"
  STYPE = DIP
  VERTICAL = NO
  REVERSE = YES
  FACTORY = LOC(1-10)0000000000
  COMMENTS = "This is Switch 2 of the first Memory Expansion board installed
		in the system.  Up to 4 boards may be installed in the
		system.\n
		The first 5 positions of this switch define the address of
		the 2nd memory expansion kit(APC-H451).  The second 5 positions
		 define the address of the 3rd expansion kit." 

SWITCH(3)=10
  NAME = "SW1 - Board 2"  
  STYPE = DIP
  VERTICAL = NO
  REVERSE = YES
  FACTORY = LOC(1-10)0000000000
  COMMENTS = "This is Switch 1 of the 2nd Memory Expansion board installed
		in the system.  Up to 4 boards may be installed in the
		system.\n"

SWITCH(4)=10
  NAME = "SW2 - Board 2"
  STYPE = DIP
  VERTICAL = NO
  REVERSE = YES
  FACTORY = LOC(1-10)0000000000
  COMMENTS = "This is Switch 2 of the 2nd Memory Expansion board installed
		in the system.  Up to 4 boards may be installed in the
		system.\N"
SWITCH(5)=10
  NAME = "SW1 - Board 3"
  STYPE = DIP
  VERTICAL = NO
  REVERSE = YES
  FACTORY = LOC(1-10)0000000000

SWITCH(6)=10
  NAME = "SW2 - Board 3"
  STYPE = DIP
  VERTICAL = NO
  REVERSE = YES
  FACTORY = LOC(1-10)0000000000

SWITCH(7)=10
  NAME = "SW1 - Board 4"
  STYPE = DIP
  VERTICAL = NO
  REVERSE = YES
  FACTORY = LOC(1-10)0000000000

SWITCH(8)=10
  NAME = "SW2 - Board 4"
  STYPE = DIP
  VERTICAL = NO
  REVERSE = YES
  FACTORY = LOC(1-10)0000000000

;
FUNCTION="Memory Expansion"
TYPE = "MEM"
COMMENTS = "The following choices show the switch settings for the memory
	expansion boards based on different starting addresses as determined 
	by the amount of 32 bit system memory installed.  Addresses must be
	set without intervals of space.\n"
CHOICE="Starting Memory Addresses"
	TOTALMEM = 8192K
COMBINE
	MEMORY = 2024K
	ADDRESS = 200000h|400000h|800000h|0A00000h
	
	INIT = SWITCH(1)LOC(1-10)0010000101|0100001001|0101001001|1010010101
      INIT = SWITCH(2)LOC(1-10)0011000111|0101001011|1101011011|1011010111
	INIT = SWITCH(3)LOC(1-10)0100001001|0110001101|0101101101|1100011001
	INIT = SWITCH(4)LOC(1-10)0101001011|0111001111|0101111111|1101011011
	INIT = SWITCH(5)LOC(1-10)0110001101|1000010001|0110010001|1001010011
	INIT = SWITCH(6)LOC(1-10)0111001111|1001010011|0111010011|1111011111
	INIT = SWITCH(7)LOC(1-10)1000010001|1010010101|1010010101|0000000000
	INIT = SWITCH(8)LOC(1-10)1001010011|1011010111|1011010111|0000000000