;   NEC EISA CONFIGURATION FILE
;
;       REV.    DATE    WHO     Changes
;     1.00.01 06/04/92  LGD    Changed serial port 2 eisa value.
;     1.00.00 06/03/92  LGD    Created from !NEC0801.CFG after SCU V3.01.00
;
;   NEC PowerMate Express 486SX/25e Systemboard CFG
;
;   Board Indentification Block
;
  BOARD
    ID            = "NEC0a01"
    NAME          = "NEC PowerMate Express 486SX/25e System Board"
    MFR           = "NEC"
    CATEGORY      = "SYS"
    SLOT          = EMB(0)
    READID        = YES
    COMMENTS      = "The NEC PowerMate Express 486SX/25e contains a 25 MHz 80486SX
		    CPU, 5 EISA slots."
    HELP          = "This is the Board Identification Block help field
		    for the NEC PowerMate Express 486SX/25e System board."

  SYSTEM

    NONVOLATILE   = 7680                        ;8192-256-256 for BIOS scratch
    AMPERAGE = 31500

    SLOT(1) = EISA    LENGTH = 341  SKIRT = NO  BUSMASTER = YES
    SLOT(2) = EISA    LENGTH = 341  SKIRT = NO  BUSMASTER = YES
    SLOT(3) = EISA    LENGTH = 341  SKIRT = NO  BUSMASTER = YES
    SLOT(4) = EISA    LENGTH = 341  SKIRT = NO  BUSMASTER = YES
    SLOT(5) = EISA    LENGTH = 341  SKIRT = NO  BUSMASTER = YES
    SLOT(6) = EISA    LENGTH = 341  SKIRT = NO  BUSMASTER = YES
    SLOT(7) = EISA    LENGTH = 341  SKIRT = NO  BUSMASTER = NO
    SLOT(8) = EISA    LENGTH = 341  SKIRT = NO  BUSMASTER = NO
    SLOT(9) = EISA    LENGTH = 341  SKIRT = NO  BUSMASTER = NO
    SLOT(10) = EISA    LENGTH = 341  SKIRT = NO  BUSMASTER = NO

    MEMORY = 640k   ADDRESS = 00000000h  CACHE = YES  STEP = 64K
    MEMORY = 64k   ADDRESS = 000F0000h  CACHE = NO
    MEMORY = 65536k   ADDRESS = 01000000h  CACHE = YES  STEP = 1M
    MEMORY = 65536k   ADDRESS = 041000000h  CACHE = YES  STEP = 1M
    MEMORY = 65536k   ADDRESS = 081000000h  CACHE = YES  STEP = 1M

JUMPER(1) = 2
 NAME = "JP4"
 JTYPE = INLINE
 VERTICAL = YES
 REVERSE = NO
 LABEL = LOC(1^2 2^3) "Disable" "Enable"
 INITVAL = LOC(2^3) 1
 COMMENTS = "This jumper enables the system password to be set.
	This jumper is located on the system board in position 4F."
HELP = "This jumper is located on the system board in position 4F."                                               
FUNCTION      = "Dummy System Type"
      SHOW = NO
      COMMENTS    = "This is only needed to fool the s/w into letting us put
		     the header at the top of the file"
      HELP        = "None"
      CHOICE      = "Dummy"

GROUP = "Shadowing Options:"
 FUNCTION = "Video BIOS Shadow"
 COMMENTS = "Shadowing area C0000h-C7FFFh. This feature when ENABLED puts a
 copy of the Video BIOS located in ROM memory into RAM memory which is then
 write-protected. The reason for doing this is that accessing RAM memory is
 much faster than accessing ROM memory. This will increase the video
 performance of the system. This feature may need to be DISABLED if certain
 software applications do not work properly due to the increase in video
 performance of the system."
 CHOICE = "Enabled"
	FREE 
	INIT = PORTADR(0C00h) BYTE 00011111
	INIT = PORTADR(8C8h) BYTE rrrrrr1r
 CHOICE = "Disabled"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111
	INIT = PORTADR(8C8h) BYTE rrrrrr0r

 FUNCTION = "System BIOS Shadow"
 COMMENTS = "Shadowing area C0000h-C7FFFh. This feature when ENABLED puts a
 copy of the Video BIOS located in ROM memory into RAM memory which is then
 write-protected. The reason for doing this is that accessing RAM memory is
 much faster than accessing ROM memory. This will increase the video
 performance of the system. This feature may need to be DISABLED if certain
 software applications do not work properly due to the increase in video
 performance of the system."
 CHOICE = "Enabled"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111
	INIT = PORTADR(8C8h) BYTE rrrrrrr1
 CHOICE = "Disabled"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111
	INIT = PORTADR(8C8h) BYTE rrrrrrr0
ENDGROUP

FUNCTION = "Memory Remap and Option ROM Shadow"
SHOW = NO
COMMENTS = "Not an option."
CHOICE = "Default"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111
	INIT = PORTADR(8C8h) BYTE rrrr00rr

GROUP = "Caching Options:"
 FUNCTION = "Global Caching"
 COMMENTS = "This feature when ENABLED is used to cache all of the RAM memory
 in the system. Cache is a small amount of very fast memory that holds the
 active parts of a larger and slower memory. This feature will increase the
 speed performance of applications. If this feature is DISABLED, both the
 'Video BIOS Cache' and 'System BIOS Cache' features will also be DISABLED
 (even if the user enabled these two features)."
 CHOICE = "Global Enabled"
	FREE 
	INIT = PORTADR(0C00h) BYTE 00011111
	INIT = PORTADR(8C8h) BYTE 1rrrrrrr
 CHOICE = "Global Disabled"
	FREE 
	INIT = PORTADR(0C00h) BYTE 00011111
	INIT = PORTADR(8C8h) BYTE 0rrrrrrr

 FUNCTION = "Video BIOS Cache"
 COMMENTS = "Cache area C0000h-C7FFFh. This feature allows the user to
 increase the speed performance of the Video BIOS. When this feature is
 ENABLED, the Video BIOS is now cached (which is a small amount of very
 fast memory that holds the active parts of a larger and slower memory)
 which increases the speed performance the of Video BIOS. The speed performance
 increase of the Video BIOS when cached is greater than only having the Video
 BIOS shadowed. When ENABLED, both 'Global Caching' and 'Video BIOS Shadow'
 features must also be ENABLED for Video BIOS Cache to work."
 CHOICE = "Enabled"
	FREE 
	INIT = PORTADR(0C00h) BYTE 00011111
	INIT = PORTADR(8C8h) BYTE rr1rrrrr
 CHOICE = "Disabled"
	FREE 
	INIT = PORTADR(0C00h) BYTE 00011111
	INIT = PORTADR(8C8h) BYTE rr0rrrrr

 FUNCTION = "System BIOS Cache"
 COMMENTS ="Cache area F0000h-FFFFFh. This feature allows the user to increase
 the speed performance of the System BIOS. When this feature is ENABLED, the
 System BIOS is cached (which is a small amount of very fast memory that
 holds the active parts of a larger and slower memory) which increases the
 speed performance of the System BIOS. The speed performance increase of the
 System BIOS when cached is greater than only having the System BIOS shadowed.
 When ENABLED, both 'Global Caching' and 'System BIOS Shadow' features must
 also be ENABLED for System BIOS Cache to work."
 CHOICE = "Enabled"
	FREE 
	INIT = PORTADR(0C00h) BYTE 00011111
	INIT = PORTADR(8C8h) BYTE rrr1rrrr
	MEMORY = 64K
	ADDRESS = 0F0000h
	CACHE = YES
	WRITABLE = NO
 CHOICE = "Disabled"
	FREE 
	INIT = PORTADR(0C00h) BYTE 00011111
	INIT = PORTADR(8C8h) BYTE rrr0rrrr
	MEMORY = 64K
	ADDRESS = 0F0000h
	CACHE = NO
	WRITABLE = NO
ENDGROUP

FUNCTION = "Extended Memory"
 SHOW = NO
 TYPE = "MEMORY1"
 COMMENTS ="Configure extended memory into EISA CMOS memory."
 CHOICE = "For Setting Extended Memory"
	FREE 
	MEMORY = 65536K
	ADDRESS = 0100000h
	MEMTYPE = SYS
	CACHE = YES
	WRITABLE = YES

FUNCTION = "Extended Memory"
 SHOW = NO
 TYPE = "MEMORY2"
 CHOICE = "For Setting Extended Memory"
	FREE 
	MEMORY = 65536K
	ADDRESS = 04100000h
	MEMTYPE = OTH
	CACHE = YES
	WRITABLE = YES

FUNCTION = "Extended Memory"
 SHOW = NO
 TYPE = "MEMORY3"
 CHOICE = "For Setting Extended Memory"
	FREE 
	MEMORY = 65536K
	ADDRESS = 08100000h
	MEMTYPE = OTH
	CACHE = YES
	WRITABLE = YES

FUNCTION = "Extended Memory"
 SHOW = NO
 TYPE = "MEMORY4"
 CHOICE = "For Setting Extended Memory"
	FREE 
	MEMORY = 65536K
	ADDRESS = 0C100000h
	MEMTYPE = OTH
	CACHE = YES
	WRITABLE = YES

GROUP = "Integrated Peripheral:"
FUNCTION = "Parallel Port Address"
  COMMENTS = "This feature allows the user to select an address and
  corresponding interrupt for the parallel port (used mostly for parallel
  printers) located on the motherboard. We recommend you use the following
  address and corresponding interrupt which is also the default setting:
  378h-37Fh, IRQ7 (Edge Triggered)."
 TYPE = "PAR"
 CHOICE = "378h-37Fh, IRQ7 (Edge Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(842h)  BYTE rrrr1010     ; set port IRQ and base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrr0rrrr     ; set port edge triggered
	PORT = 0378h-037Fh
	SHARE = NO
	SIZE = BYTE
	IRQ = 7
	SHARE = NO

 CHOICE = "278h-27Fh, IRQ7 (Edge Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(842h)  BYTE rrrr1011     ; set port IRQ and base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrr0rrrr     ; set port edge triggered
	PORT = 0278h-027Fh
	SHARE = NO
	SIZE = BYTE
	IRQ = 7
	SHARE = NO


 CHOICE = "3BCh-3BFh, IRQ5 (Edge Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(842h)  BYTE rrrr0001     ; set port IRQ and base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrr0rrrr     ; set port edge triggered
	PORT = 03BCh-03BFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 5
	SHARE = NO

 CHOICE = "Disabled"
  DISABLE = YES
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(842h)  BYTE rrrrr000     ; set parallel port base addr

 CHOICE = "378h-37Fh, IRQ7 (Level Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(842h)  BYTE rrrr1010     ; set port IRQ and base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrr1rrrr     ; set port level triggered
	PORT = 0378h-037Fh
	SHARE = NO
	SIZE = BYTE
	IRQ = 7
	SHARE = YES
	TRIGGER = LEVEL

 CHOICE = "278h-27Fh, IRQ7 (Level Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(842h)  BYTE rrrr1011     ; set port IRQ and base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrr1rrrr     ; set port level triggered
	PORT = 0278h-027Fh
	SHARE = NO
	SIZE = BYTE
	IRQ = 7
	SHARE = YES
	TRIGGER = LEVEL

 CHOICE = "3BCh-3BFh, IRQ5 (Level Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(842h)  BYTE rrrr0001     ; set port IRQ and base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrr1rrrr     ; set port level triggered
	PORT = 03BCh-03BFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 5
	SHARE = YES
	TRIGGER = LEVEL

FUNCTION = "Serial Port 1 Address"
  COMMENTS = "This feature allows the user to select an address and
 corresponding interrupt for serial port 1 located on the motherboard. We
 recommend you use the following address and corresponding interrupt which
 is also the default setting: 3F8h-3FFh, IRQ4 (Edge Triggered)."
 TYPE = "COM"
 CHOICE = "3F8h-3FFh, IRQ4 (Edge Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrrr001     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrrr0     ; set serial port edge triggered
	PORT = 03F8h-03FFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 4
	SHARE = NO
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrr1rrr     ; set IRQ 4
 CHOICE = "2F8h-2FFh, IRQ3 (Edge Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrrr010     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrrr0     ; set serial port edge triggered
	PORT = 02F8h-02FFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 3
	SHARE = NO
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrr0rrr     ; set IRQ 3
 CHOICE = "3E8h-3EFh, IRQ4 (Edge Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrrr011     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrrr0     ; set serial port edge triggered
	PORT = 03E8h-03EFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 4
	SHARE = NO
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrr1rrr     ; set IRQ 4
 CHOICE = "2E8h-2EFh, IRQ3 (Edge Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrrr100     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrrr0     ; set serial port edge triggered
	PORT = 02E8h-02EFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 3
	SHARE = NO
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrr0rrr     ; set IRQ 3
 CHOICE = "Disabled"
  DISABLE = YES
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrrr000     ; set serial port base addr
 CHOICE = "3F8h-3FFh, IRQ4 (Level Triggered)"
  FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrrr001     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrrr1     ; set serial port level trigger
	PORT = 03F8h-03FFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 4
	SHARE = YES
	TRIGGER = LEVEL                         ;COM port add
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrr1rrr     ; set IRQ 4
 CHOICE = "2F8h-2FFh, IRQ3 (Level Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrrr010     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrrr1     ; set serial port level trigger
	PORT = 02F8h-02FFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 3
	SHARE = YES
	TRIGGER = LEVEL
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrr0rrr     ; set IRQ 3
 CHOICE = "3E8h-3EFh, IRQ4 (Level Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrrr011     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrrr1     ; set serial port level trigger
	PORT = 03E8h-03EFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 4
	SHARE = YES                             ;COM port fix
	TRIGGER = LEVEL                         ;COM port add
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrr1rrr     ; set IRQ 4
 CHOICE = "2E8h-2EFh, IRQ3 (Level Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrrr100     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrrr1     ; set serial port level trigger
	PORT = 02E8h-02EFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 3
	SHARE = YES                             ;COM port fix
	TRIGGER = LEVEL                         ;COM port add
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE rrrr0rrr     ; set IRQ 3

FUNCTION = "Serial Port 2 Address"
  COMMENTS = "This feature allows the user to select an address and
 corresponding interrupt for serial port 2 located on the motherboard. We
 recommend you use the following address and corresponding interrupt which
 is also the default setting: 2F8h-2FFh, IRQ3 (Edge Triggered)."
 TYPE = "COM"
 CHOICE = "3F8h-3FFh, IRQ4 (Edge Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE r001rrrr     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrr0r     ; set serial port edge triggered
	PORT = 03F8h-03FFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 4
	SHARE = NO
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE 1rrrrrrr     ; set IRQ 4
 CHOICE = "2F8h-2FFh, IRQ3 (Edge Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE r010rrrr     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrr0r     ; set serial port edge triggered
	PORT = 02F8h-02FFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 3
	SHARE = NO
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE 0rrrrrrr     ; set IRQ 3
 CHOICE = "3E8h-3EFh, IRQ4 (Edge Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE r011rrrr     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrr0r     ; set serial port edge triggered
	PORT = 03E8h-03EFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 4
	SHARE = NO
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE 1rrrrrrr     ; set IRQ 4
 CHOICE = "2E8h-2EFh, IRQ3 (Edge Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE r100rrrr     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrr0r     ; set serial port edge triggered
	PORT = 02E8h-02EFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 3
	SHARE = NO
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE 0rrrrrrr     ; set IRQ 3
 CHOICE = "Disabled"
  DISABLE = YES
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE r000rrrr     ; set serial port base addr
 CHOICE = "3F8h-3FFh, IRQ4 (Level Triggered)"
  FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE r001rrrr     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrr1r     ; set serial port level trigger
	PORT = 03F8h-03FFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 4
	SHARE = YES
	TRIGGER = LEVEL                         ;COM port add
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE 1rrrrrrr     ; set IRQ 4
 CHOICE = "2F8h-2FFh, IRQ3 (Level Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE r010rrrr     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrr1r     ; set serial port level trigger
	PORT = 02F8h-02FFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 3
	SHARE = YES
	TRIGGER = LEVEL
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE 0rrrrrrr     ; set IRQ 3
 CHOICE = "3E8h-3EFh, IRQ4 (Level Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE r011rrrr     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrr1r     ; set serial port level trigger
	PORT = 03E8h-03EFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 4
	SHARE = YES                             ;COM port fix
	TRIGGER = LEVEL                         ;COM port add
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE 1rrrrrrr     ; set IRQ 4
 CHOICE = "2E8h-2EFh, IRQ3 (Level Triggered)"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE r100rrrr     ; set serial port base addr
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(841h)  BYTE rrrrrr1r     ; set serial port level trigger
	PORT = 02E8h-02EFh
	SHARE = NO
	SIZE = BYTE
	IRQ = 3
	SHARE = YES                             ;COM port fix
	TRIGGER = LEVEL                         ;COM port add
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(840h)  BYTE 0rrrrrrr     ; set IRQ 3

ENDGROUP

GROUP = "Floppy Diskette Control Options:"
FUNCTION = "Floppy Boot"
  COMMENTS = "This feature allows the user to enable or disable the ability
  to boot from a floppy diskette on their system. This feature will stop any
  users from booting software from a floppy diskette on your system. This type
  of security can be very helpful with a networking workstation where an
  administrator would not want any users booting software from a floppy on
  that system. When ENABLED, you can boot either a floppy diskette or hard
  disk. When this feature is DISABLED, the system will NOT be allowed to boot
  from the floppy disk."
SHOW = YES
CHOICE = "Enable"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(844h)  BYTE rrrrr0rr     ; allow floppy boot
CHOICE = "Disable"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(844h)  BYTE rrrrr1rr     ; do not allow floppy boot

FUNCTION = "Floppy Write Protect"
  COMMENTS = "This feature is not supported on this hardware"
SHOW = NO
CHOICE = "Disable"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(844h)  BYTE rrrrrr0r     ; set flop wrt protect disable
ENDGROUP

FUNCTION = "IDE Hard Disk Controller"
  TYPE = "MSD,DSKDTL"
  COMMENTS = "This feature allows the user to enable or disable the IDE
	      (Integrated Drive Electronics) port located on the motherboard.
	      The user would disable this feature if they are using a hard
	      drive requiring an external controller such as an ESDI, SCSI, or
	      ST506 controller.\n
	      If this choice is disabled with no other hard drive installed,
	      please set the Hard Disk Drive type to Not Installed."
 CHOICE = "Integrated IDE Hard Disk Controller:  Enabled"
      FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(844h)  BYTE rrrr1rrr     ; set built-in IDE enabled

	PORT = 3F6H
	  SIZE = BYTE
	  SHARE = NO
	PORT = 1F0H-1F7H
	  SIZE = WORD
	  SHARE = NO
	PORT = 3F7H
	  SHARE = YES
	  SIZE = WORD
	IRQ = 14
	  SHARE = NO
	  TRIGGER = EDGE

    CHOICE = "Integrated IDE Hard Disk Controller:  Disabled"
      DISABLE = YES
      FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(844h)  BYTE rrrr0rrr     ; set built-in IDE disabled

FUNCTION = "Typematic Rate"
   COMMENTS = "This feature allows the user to select the speed
   (Maximum/Fast/Normal/Slow) at which the key will repeat when pressed and
   held."
   CHOICE = "Maximum"
   FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(849h)  BYTE rrrrrr11     ; set Maximum typematic rate
   CHOICE = "Fast"
   FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(849h)  BYTE rrrrrr10     ; set Fast typematic rate
   CHOICE = "Normal"
   FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(849h)  BYTE rrrrrr01     ; set Normal typematic rate
   CHOICE = "Slow"
   FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(849h)  BYTE rrrrrr00     ; set Slow typematic rate

FUNCTION = "Posted I/O Writes"
   COMMENTS = "This option is not supported on this hardware."
   SHOW = NO
   CHOICE = "Disable"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(844h)  BYTE rrrrrrr0     ; set A20 Intercept disabled

FUNCTION = "Mouse Port"
   TYPE = "MOP"
   COMMENTS = "This feature is used to enable or disable the built-in mouse
   port. The mouse port uses IRQ12. For example, if a mouse is not required,
   the Mouse Port can be disabled and a add-in adapter card can use IRQ12."
   CHOICE = "Enable"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(844h)  BYTE rrr1rrrr     ; set PS/2 mouse IRQ enabled
	IRQ = 12
	SHARE = NO
   CHOICE = "Disable"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111     ; Select Last Page of EISA CMOS
	INIT = PORTADR(844h)  BYTE rrr0rrrr     ; set PS/2 mouse IRQ disabled

FUNCTION = "Concurrent Mode & Decoupled Refresh"
   TYPE = "CCM"
   COMMENTS = "This option is not supported by this hareware."
   SHOW = NO
   CHOICE = "Disable"
	FREE
	INIT = PORTADR(0C00h) BYTE 00011111
	INIT = PORTADR(8C8h) BYTE r0rrrrrr

FUNCTION = "NMI"
   SHOW = NO
   COMMENTS = "Cannot be changed all set to disabled."
   CHOICE = "Disabled"
       FREE
	 INIT = PORTADR(0C00h) BYTE 00011111
	 INIT = PORTADR(8D0h) BYTE rrrr000r

INCLUDE = "ISACMOS.OVL"

FUNCTION = "Local/ISA Bus Video"
   COMMENTS = "This option is not supported by this hareware."
   SHOW = NO
   CHOICE = "ISA Bus Video"
   FREE
	INIT = PORTADR(0C0h) BYTE 00011111
	INIT = PORTADR(845h) BYTE 00000000

FUNCTION = "Monitor Display Type"
   CHOICE = "Color monitor attached"
   FREE
	INIT = PORTADR(0C0h) BYTE 00011111
	INIT = PORTADR(844h) BYTE rr0rrrrr
   CHOICE = "Monochrome monitor attached"
   FREE
	INIT = PORTADR(0C0h) BYTE 00011111
	INIT = PORTADR(844h) BYTE rr1rrrrr

FUNCTION = "Automatic Scan Rate Detect"
COMMENTS = "Only Applicable for Built-in Video Cards."
   CHOICE = "Enable Automatic detect"
       FREE
	 INIT = PORTADR(0C00h) BYTE 00011111
	 INIT = PORTADR(84Ah) BYTE 1r000000             ;Video fix
   CHOICE = "Type I:   640x480@60Hz 800x600@56Hz 1024x768@87Hz{I}"
       FREE
	 INIT = PORTADR(0C00h) BYTE 00011111
	 INIT = PORTADR(84Ah) BYTE 0r000000             ;Video fix
   CHOICE = "Type II:   640x480@72Hz 800x600@60Hz 1024x768@87Hz{I}"
       FREE
	 INIT = PORTADR(0C00h) BYTE 00011111
	 INIT = PORTADR(84Ah) BYTE 0r000001             ;Video fix
   CHOICE = "Type III:  640x480@72Hz 800x600@72Hz 1024x768@60Hz"
       FREE
	 INIT = PORTADR(0C00h) BYTE 00011111
	 INIT = PORTADR(84Ah) BYTE 0r000010             ;Video fix
   CHOICE = "Type IV: 640x480@72Hz 800x600@72Hz 1024x768@70Hz"
       FREE
	 INIT = PORTADR(0C00h) BYTE 00011111
	 INIT = PORTADR(84Ah) BYTE 0r000011             ;Video fix