; IM-1280 GSP and RTP-1280 configuration file
; Version 1.1

;Board identification block

BOARD
   ID = "MTX2070"
   NAME = "MATROX GSP BOARD"
   MFR = "MATROX"
   CATEGORY = "OTH"
   SLOT = ISA8
   AMPERAGE = 1500
   COMMENTS = "\nMATROX IM-1280 GSP IMAGE PROCESSING BOARD AND RTP-1280\n\n
               This configuration is used to reserve a slot for both the 
               GSP board and the RTP-1280 real-time processor (optional).
               This board can be identified by its ISA connector. It can be
               plugged into either an EISA or ISA (AT) slot."    
   HELP = "The 34020 GSP and 34082 FPU processors are located in this slot.
           As well, the RTP-1280 can optionally be connected here"

FUNCTION = "MATROX IM-1280 GSP BOARD"
   TYPE = "OTH"
   COMMENTS = "This is the GSP board. A slot must be reserved for this 
               board even if it can't be accessed by the host.
               This is done to prevent the configuration program from 
               allocating the slot to another resource."
   HELP = "The host can only access the resources in this slot through 
           the EISA bus interface of the IM-1280/EISA board."
   CHOICE = "Slot reserved for GSP board"