;
;     MYLEX GLE(911) VIDEO GRAPHICS ADAPTER
;
BOARD
  ID = "MLX0050"
  NAME = "Mylex GLE(911) EISA Graphics Adapter"
  MFR = "Mylex"
  CATEGORY = "VID"
  SLOT = EISA
  LENGTH = 180				 ;HEIGHT=102
  READID = yes
  DISABLE = UNSUPPORTED
  IOCHECK = INVALID
  COMMENTS="Mylex GLE is a high performance graphics controller
	    with the following features:
	    \n    . 100% VGA compatible  
	    \n    . Full register level CGA,HGC,EGA and MDA 
	    \n      backward compatible 
	    \n    . Support all standard resolutions up to
	    \n      1024x768 with 256 colors 
	    \n    . VGA text up to 132 columns x 43 rows 
	    \n    . Uses GUI accelerator 
	    \n    . Hardware line drawing and rectangle fill 
	    \n    . Programmable hardware cursor 64x64x2 
	    \n    . Non interlaced video up to 72Hz refresh 
	    \n    . 1Mb video ram 
	    \n    . Drivers available for Windows 3.x,
	    \n      AutoCad,MS Word,Cadvances and more."


JUMPER(1) = 3	
NAME = "MONITOR J1 J2 J3"
JTYPE = TRIPOLE
LABEL = LOC (1-3) "J1" "J2" "J3"
REVERSE = yes
JUMPER(2) = 1
JTYPE = PAIRED 
NAME = "IRQ9 J8"
VERTICAL = yes  
LABEL = LOC (1) "J8"
REVERSE = yes

FUNCTION = "Video Display mode"

  CHOICE = "Color"
   LINK
     	MEMORY = 128K
	ADDRESS = 0A0000h
	MEMTYPE = other
    LINK
       MEMORY = 32K
	ADDRESS = 0C0000h
	MEMTYPE = other
        WRITABLE= NO

    FREE
      PORT = 03C0H-3CFH
      PORT = 03D4h-03DCh
      PORT = 42E8H
      PORT = 4AE8H
      PORT = 82E8H
      PORT = 86E8H
      PORT = 8AE8H
      PORT = 8EE8H
      PORT = 92E8H
      PORT = 96E8H
      PORT = 9AE8H
      PORT = 9EE8H
      PORT = 0A2E8H
      PORT = 0A6E8H
      PORT = 0AAE8H
      PORT = 0AEE8H
      PORT = 0B6E8H
      PORT = 0BAE8H
      PORT = 0BEE8H
      PORT = 0E2E8H
		
  CHOICE = "Mono"

   LINK
     	MEMORY = 32K
	ADDRESS = 0B0000h
	MEMTYPE = other
    LINK	
       MEMORY = 32K
	ADDRESS = 0C0000h
	MEMTYPE = other
        WRITABLE= NO
    FREE
      PORT = 03C0H-3CFH
      PORT = 03B4h-03BFh
      PORT = 42E8H
      PORT = 4AE8H
      PORT = 82E8H
      PORT = 86E8H
      PORT = 8AE8H
      PORT = 8EE8H
      PORT = 92E8H
      PORT = 96E8H
      PORT = 9AE8H
      PORT = 9EE8H
      PORT = 0A2E8H
      PORT = 0A6E8H
      PORT = 0AAE8H
      PORT = 0AEE8H
      PORT = 0B6E8H
      PORT = 0BAE8H
      PORT = 0BEE8H
      PORT = 0E2E8H

FUNCTION = "Monitor Selections(Enhanced mode)"
  COMMENTS="Three jumpers need to be set properly in order for 
	    the selected type of monitor to function properly.
	    After making a selection, see jumper setting for
            proper configuration."
  HELP="See jumper setting (J1,J2 and J3) for this selection."

  CHOICE = "640x480 60Hz non interlaced"

  free
   INIT = JUMPER(1) LOC(1) 1
  INIT = JUMPER(1) LOC(2) 1
  INIT = JUMPER(1) LOC(3) 1

  CHOICE = "640x480 70Hz non interlaced"
  free
   INIT = JUMPER(1) LOC(1) 0
  INIT = JUMPER(1) LOC(2) 1
  INIT = JUMPER(1) LOC(3) 1

  CHOICE = "800x600 60Hz non interlaced"

  free
   INIT = JUMPER(1) LOC(1) 1
  INIT = JUMPER(1) LOC(2) 0
  INIT = JUMPER(1) LOC(3) 1

  CHOICE = "800x600 70Hz non interlaced"

  free
   INIT = JUMPER(1) LOC(1) 0
  INIT = JUMPER(1) LOC(2) 0
  INIT = JUMPER(1) LOC(3) 1

  CHOICE = "800x600 56Hz non interlaced"

  free
   INIT = JUMPER(1) LOC(1) 1
  INIT = JUMPER(1) LOC(2) 1
  INIT = JUMPER(1) LOC(3) 0

  CHOICE = "1024x768 43Hz interlaced"

  free
   INIT = JUMPER(1) LOC(1) 0
  INIT = JUMPER(1) LOC(2) 1
  INIT = JUMPER(1) LOC(3) 0

  CHOICE = "1024x768 60Hz non interlaced"
  free
   INIT = JUMPER(1) LOC(1) 1
  INIT = JUMPER(1) LOC(2) 0
  INIT = JUMPER(1) LOC(3) 0

  CHOICE = "1024x768 72Hz non interlaced"

  free
   INIT = JUMPER(1) LOC(1) 0
  INIT = JUMPER(1) LOC(2) 0
  INIT = JUMPER(1) LOC(3) 0

FUNCTION = "IRQ9 Option"
  COMMENTS="IRQ9 is normally not used by the firmware, However,
	    driver program can use IRQ9. A jumper (J8) can 
	    disable/enable IRQ9. Verify jumper setting after
            making a selection."
  HELP="See jumper setting (J8) for this selection."

  CHOICE = "IRQ9 Hardware Disable"
  free
    INIT = JUMPER(2) LOC(1) 0

  CHOICE = "IRQ9 Hardware Enable"
  free
    INIT = JUMPER(2) LOC(1) 1