; Madge Smart 16/4 EISA Ringnode Configuration File, Rev. 01 ; Copyright (c) Madge Networks Ltd. 1990 BOARD ID = "MDG0001" NAME = "Madge Smart 16/4 EISA Ringnode" MFR = "Madge Networks Ltd." CATEGORY = "NET" SLOT = EISA LENGTH = 249 AMPERAGE = 2900 SKIRT = NO READID = YES BUSMASTER = 100 IOCHECK = VALID DISABLE = SUPPORTED COMMENTS = "This is a dual-speed (16Mbit/s or 4Mbit/s) token ring adapter card for EISA computers. It utilises the Madge proprietary Smart software and a 33Mbyte/s bus master transfer rate to achieve high performance.\n \n Six interrupt numbers are provided using either level- or edge-sensitive operation. Slot-specific I/O addressing permits multiple adapters to be used in the same computer. Automatic configuration is supported, but the user is required to configure the ring speed manually as a security feature." HELP = "Thank you for buying this Madge Smart 16/4 EISA Ringnode. Please note that the adapter's ring speed must be manually configured before use." IOPORT(1) = 0z090h INITVAL = 00000xxxb IOPORT(2) = 0z050h INITVAL = 000000xxb IOPORT(3) = 0zC90h INITVAL = x0xxxxxxb FUNCTION = "Token Ring Network Adapter" TYPE = "NET,TOK" CONNECTION = "9-pin D-socket: token ring lobe cable" SUBFUNCTION = "Ring Speed" TYPE = "SPD" HELP = "Please select the required ring speed (either 16Mbit/s or 4Mbit/s) according to the speed of your network. Note: if no speed is selected, the adapter software will report an error." CHOICE = "No Speed Selected" SUBTYPE = "NONE" FREE INIT = IOPORT(3) LOC(7) 0b INIT = IOPORT(2) LOC(1) 1b INIT = IOPORT(3) LOC(5) 1b CHOICE = "16 Mbit/s" SUBTYPE = "16" FREE INIT = IOPORT(3) LOC(7) 1b INIT = IOPORT(2) LOC(1) 1b INIT = IOPORT(3) LOC(5) 1b CHOICE = " 4 Mbit/s" SUBTYPE = "4" FREE INIT = IOPORT(3) LOC(7) 1b INIT = IOPORT(2) LOC(1) 0b INIT = IOPORT(3) LOC(5) 0b SUBFUNCTION = "Interrupt" TYPE = "INT" COMMENTS= "Note: to change the interrupt number, use Change Resource in the Edit menu." HELP = "Please select the interrupt type, either level- or edge-sensitive. Level-sensitive operation permits multiple Madge Ringnodes to share the same interrupt number. Note: to change the interrupt number, use Change Resource in the Edit menu or CTRL-R." CHOICE = "Level-sensitive" SUBTYPE = "LEVEL" FREE IRQ = 15 | 12 | 11 | 10 | 9 | 3 SHARE = "MADGE_EISA" TRIGGER = LEVEL INIT = IOPORT(1) LOC(2-0) 101b | 100b | 011b | 010b | 000b | 001b INIT = IOPORT(2) LOC(0) 0b | 0b | 0b | 0b | 0b | 0b INIT = IOPORT(3) LOC(4-0) 01111b | 01100b | 01011b | 01010b | 00010b | 00011b CHOICE = " Edge-sensitive" SUBTYPE = "EDGE" FREE IRQ = 15 | 12 | 11 | 10 | 9 | 3 SHARE = NO TRIGGER = EDGE INIT = IOPORT(1) LOC(2-0) 101b | 100b | 011b | 010b | 000b | 001b INIT = IOPORT(2) LOC(0) 1b | 1b | 1b | 1b | 1b | 1b INIT = IOPORT(3) LOC(4-0) 11111b | 11100b | 11011b | 11010b | 10010b | 10011b