BOARD
   ID	    = "ISAA203"
   NAME     = "Paradise VGA Plus 16 Card"
   MFR	    = "Paradise"
   CATEGORY = "VID"
   SLOT     = ISA8OR16
   COMMENTS = "
 You can insert the VGA Plus 16 card into an
 8-bit or 16-bit expansion slot, but you will
 need to use a 16-bit slot to use the 16-bit
 capabilities."

SWITCH(1) = 4
   STYPE    = dip
   NAME     = "SW1"
   VERTICAL = YES
   LABEL    = LOC(4 3 2 1) "4" "3" "2" "1"
   FACTORY  = LOC(4-1) 1010
   COMMENTS = "This switch is located on the backplane.\n\n
 Switch 1 sets the monitor type.\n
 Switch 2 sets the VGA mode switching implementation type.\n
 Switch 3 is not used and should be set to the OFF position.\n
 Switch 4 is used to set 8 bit or 16 bit memory data path."

JUMPER(1) = 1
   NAME     = "W1"
   JTYPE    = paired
   FACTORY  = LOC(1) 1
   COMMENTS = "
 This jumper sets the system to manual 16 bit BIOS
 Configuration if it is not present.  This should only
 be used if the AutoSense circuit on the card cannot
 automatically set up 16 bit BIOS and the 16TEST program
 recommends that you try to manually configure the 16 bit
 BIOS."

JUMPER(2) = 2
   NAME     = "W2"
   JTYPE    = INLINE
   VERTICAL = YES
   REVERSE  = YES
   LABEL    = LOC(1 2 3) "1" "2" "3"
   FACTORY  = LOC(1^2 2^3) 10
   COMMENTS = "
 This jumper is provided to allow your board to use the
 clock input from the Video Feature Connector.	The factory
 setting over pins 1 and 2 allows support of 800x600 graphics
 and 132 column text modes.  The other position over pins 2 and 3
 disables 800x600 graphics and 132 column text modes and provides
 full support for all the signals on the Video Feature Connector.
 The Feature Connector Clock Jumper should be left in the factory
 setting on pins 1 and 2 for normal operation."

FUNCTION = "Video Card Operations"
   TYPE = "VID,VGA"
   CONNECTION = "DB-15"

   SUBFUNCTION = "Two Monitor Systems"
      COMMENTS = "
 Your 16 Bit VGA card may be used in conjunction with
 another video board and monitor combination.  The second
 video card and monitor pair must be monochrome or CGA.
 These are the only combinations that will work with the
 16 bit VGA card."
      CHOICE = "16 Bit VGA only"
	 LINK
	    MEMORY = 128k
	    ADDRESS = 0A0000h
	       WRITABLE = YES
	       MEMTYPE = OTHER
	 FREE
	    PORT = 03B0h - 03DFh
      CHOICE = "16 Bit VGA with a Monochrome card and monitor"
	 LINK
	    MEMORY = 64k
	    ADDRESS = 0A0000h
	       MEMTYPE = OTHER
	 LINK
	    MEMORY = 32k
	    ADDRESS = 0B8000h
	       MEMTYPE = OTHER
	 FREE
	    PORT = 03C0h - 03DFh
      CHOICE = "16 Bit VGA with CGA card and RGB monitor"
	 LINK
	    MEMORY = 64k
	    ADDRESS = 0A0000h
	       MEMTYPE = OTHER
	 LINK
	    MEMORY = 32k
	    ADDRESS = 0B0000h
	       MEMTYPE = OTHER
	 FREE
	    PORT = 03B0h - 03CFh

   SUBFUNCTION = "Monitor Type"
      TYPE = "VID,MON"
      COMMENTS = "
 These choices tell the 16 VGA card to use special timing
 for multi-frequency monitors or to use standard VGA
 timing for fixed frequency PS/2 monitors and some newer
 multi-frequency monitors.  The multi-frequency monitor
 setting will allow video to be displayed on multi-frequency
 monitors using a larger screen area than standard PS/2
 timing will allow.  You may want to experiment to find
 the best results with your multi-frequency monitor."
      CHOICE = "Standard PS/2 compatible fixed frequency display timing."
	 FREE
	    INIT = SWITCH(1) LOC(1) 0
      CHOICE = "Special multi-frequency display timing."
	 FREE
	    INIT = SWITCH(1) LOC(1) 1

   SUBFUNCTION = "VGA Mode Switching Implementation type."
      COMMENTS = "
 Select the manner in which the 16 Bit VGA card handles
 switching between color and monochrome VGA modes.
 You will normally set it to the ON position to select
 the PS/2 style VGA implementation."
      CHOICE = "PS/2 style - all VGA modes on any monitor."
	 FREE
	    INIT = SWITCH(1) LOC(2) 1
      CHOICE = "PC/AT style - color modes on color monitor mono on mono monitor."
	 FREE
	    INIT = SWITCH(1) LOC(2) 0

   SUBFUNCTION = "8bit vs. 16 bit and AutoSense."
      COMMENTS = "
 Manual configuration for 16 bit BIOS should only
 be used if the 16TEST program recommends it."
      CHOICE = "Enable 16 bit video data path and use AutoSense for 16 bit BIOS."
	 FREE
	    INIT = SWITCH(1) LOC(4) 1
	    INIT = JUMPER(1) LOC(1) 1
	 LINK
	    MEMORY = 32k
	    ADDRESS = 0C0000h
	       MEMTYPE = OTHER

      CHOICE = "Force 8 bit video memory data path and 8 bit BIOS."
	 FREE
	    INIT = SWITCH(1) LOC(4) 0
	    INIT = JUMPER(1) LOC(1) 1
	 LINK
	    MEMORY = 32k
	    ADDRESS = 0C0000h
	       MEMTYPE = OTHER

      CHOICE = "Manually Configure 16 bit BIOS."
	 FREE
	    INIT = JUMPER(1) LOC(1) 0
	 LINK
	    MEMORY = 64k
	    ADDRESS = 0C0000h
	       MEMTYPE = OTHER

   SUBFUNCTION = "Feature Connector Clock"
      COMMENTS = "
 The 800x600 graphics and 132 col text mode
 is the mode for normal operation."
      CHOICE = "Support 800x600 graphics and 132 col text."
	 FREE
	    INIT = JUMPER(2) LOC(1^2 2^3) 10
      CHOICE = "Support all the signals on the Video Feature Connector."
	 FREE
	    INIT = JUMPER(2) LOC(1^2 2^3) 01