BOARD						; 10/20 KN New Definition
 ID="ISA9401"
 NAME="Gateway G/Ethernet 8-bit PC"
 MFR="Gateway"
 CATEGORY="NET"
 SLOT=ISA8
 LENGTH= 127
 COMMENTS="
 \nSelect desired Network Operating System or 'All Other Uses' to 
 obtain valid hardware options. 
 \n\nNote: IRQ 2 is equivalent to IRQ 9. "
 HELP="
 Use the V)iew D)etail by Slot mode to see Configuration Options 
 by Network Software Type. Use E)dit Change F)unction to select Options."

SWITCH(1)=8
 STYPE=DIP
 NAME="SW1 I/O Ports"
 REVERSE=YES

JUMPER(1)=6
 JTYPE=PAIRED
 NAME="JP2 Interrupt Req"
 LABEL=LOC(6-1) "2" "3" "4" "5" "6" "7"

JUMPER(2)=4
 JTYPE=tripole
 NAME="JP4 Connector Type"

SOFTWARE(1) ="
 \n\nNetware provides preset options to be selected from a list 
 numbered Configuration Option 00-nn. 
 \n\nBe Sure to Configure Network Server or Workstation 
 Software to Use the Selected Resource Options: \n"

FUNCTION="G/Ethernet PC Config Options"
 TYPE="NET"
 HELP="Use E)dit Change F)unction to Select Options.
 \n\nSelect the Desired Network Operating System to Obtain Selection of 
 Valid Option Choices.
 \n\nOnly one Network Function Should be in effect."
 SUBFUNCTION="Netware 286"
 CHOICE="Config Option 00: 3,2A0"
 LINK
 IRQ= 3
 INIT=JUMPER(1) LOC(6-1) 010000
 PORT=2A0h-2BFh
 INIT=SWITCH(1) LOC(1-4) 1011
 INIT=software(1) "\tOptn 00 3,2A0"
 CHOICE="Config Option 01: 5,280"
 LINK
 IRQ= 5
 INIT=JUMPER(1) LOC(6-1) 000100
 PORT=280h-29Fh
 INIT=SWITCH(1) LOC(1-4) 1111
 INIT=software(1) "\tOptn 01 5,280"
 CHOICE="Config Option 02: 3,2E0"
 LINK
 IRQ= 3
 INIT=JUMPER(1) LOC(6-1) 010000
 PORT=2E0h-2FFh
 INIT=SWITCH(1) LOC(1-4) 1001
 INIT=software(1) "\tOptn 02 3,2E0"
 CHOICE="Config Option 03: 5,320"
 LINK
 IRQ= 5
 INIT=JUMPER(1) LOC(6-1) 000100
 PORT=320h-33Fh
 INIT=SWITCH(1) LOC(1-4) 1010
 INIT=software(1) "\tOptn 03 5,320"
 CHOICE="Config Option 04: 7,360"
 LINK
 IRQ= 7
 INIT=JUMPER(1) LOC(6-1) 000001
 PORT=360h-37Fh
 INIT=SWITCH(1) LOC(1-4) 1000
 INIT=software(1) "\tOptn 04 7,360"
 CHOICE="Config Option 05: 3,300"
 LINK
 IRQ= 3
 INIT=JUMPER(1) LOC(6-1) 010000
 PORT=300h-31Fh
 INIT=SWITCH(1) LOC(1-4) 1110
 INIT=software(1) "\tOptn 05 3,300"
 CHOICE="Config Option 06: 3,2C0"
 LINK
 IRQ= 3
 INIT=JUMPER(1) LOC(6-1) 010000
 PORT=2C0h-2DFh
 INIT=SWITCH(1) LOC(1-4) 1101
 INIT=software(1) "\tOptn 06 3,2C0"
 CHOICE="Config Option 07: 2,2C0"
 LINK
 IRQ= 2
 INIT=JUMPER(1) LOC(6-1) 100000
 PORT=2C0h-2DFh
 INIT=SWITCH(1) LOC(1-4) 1101
 INIT=software(1) "\tOptn 07 2,2C0"
 CHOICE="Not Selected"
 SUBFUNCTION="All Other Uses"
 CHOICE="Not Selected"
 CHOICE="Available Adapter Options"
 LINK
 IRQ = 2|3|4|5|6|7
 INIT=JUMPER(1) LOC (6-1)
 100000|010000|001000|000100|000010|000001
 INIT=software(1)
 "\tIRQ2"|"\tIRQ3"|"\tIRQ4"|"\tIRQ5"|"\tIRQ6"|"\tIRQ7"
 LINK
 PORT= 0280h-029Fh|02A0h-02BFh|02C0h-02DFh|
 02E0h-02FFh|0300h-031Fh|0320h-033Fh|
 0360h-037Fh
 INIT=SWITCH(1) LOC(1-4)
 1111|1011|1101|1001|1110|1010|
 1000
 INIT=software(1)
 "\tIO280"|"\tIO2A0"|"\tIO2C0"|"\tIO2E0"|"\tIO300"|"\tIO320"|
 "\tIO360"

FUNCTION="G/Ethernet PC Connector Type"
 TYPE="NET"
 CHOICE="BNC Thinwire Connection"
 FREE
 INIT=JUMPER(2) LOC(4-1) 1111
 INIT=SOFTWARE(1) "BNC Thinwire"
 CHOICE="DIX Thickwire Connection"
 FREE
 INIT=JUMPER(2) LOC(4-1) 0000
 INIT=SOFTWARE(1) "DIX Thickwire"