BOARD ID="ISA4010" NAME="Dialogic DTI/2xx, DMX, MSI/C Adapter" MFR="Dialogic" CATEGORY="OTH" SLOT=ISA16 LENGTH=100 COMMENTS="Use this for Dialogic DTI/2xx, DMX, and MSI/C modules" FUNCTION="DTI/2xx, DMX, MSI/C I/O Resource Allocation" TYPE="DTI2XX" HELP="Allows choosing the I/O ports being used by the DTI/2xx, DMX, and MSI/C modules used in the system. If using slots in the system chassis then specify 'One DTI/2xx...' for each slot that has a module. If using slots in an expansion chassis then up to 4 may be allocated." CHOICE="No DTI/2xx modules" SUBTYPE="DIS" DISABLE=YES CHOICE="One DTI/2xx, DMX, or MSI/C" LINK PORT= 320h-327h | 100h-107h | 200h-207h | 300h-307h | 308h-30fh | 310h-317h | 328h-32fh | 3f8h-3ffh CHOICE="Two DTI/2xx, DMX, or MSI/C" LINK PORT= 320h-327h | 100h-107h | 200h-207h | 300h-307h | 308h-30fh | 310h-317h | 328h-32fh | 3f8h-3ffh PORT= 310h-317h | 200h-207h | 300h-307h | 308h-30fh | 100h-107h | 320h-327h | 328h-32fh | 3f8h-3ffh CHOICE="Three DTI/2xx, DMX, or MSI/C" LINK PORT= 320h-327h | 100h-107h | 200h-207h | 300h-307h | 308h-30fh | 310h-317h | 328h-32fh | 3f8h-3ffh PORT= 310h-317h | 100h-107h | 200h-207h | 300h-307h | 308h-30fh | 320h-327h | 328h-32fh | 3f8h-3ffh PORT= 300h-307h | 100h-107h | 200h-207h | 308h-30fh | 310h-317h | 320h-327h | 328h-32fh | 3f8h-3ffh CHOICE="Four DTI/2xx, DMX, or MSI/C" LINK PORT= 320h-327h | 100h-107h | 200h-207h | 300h-307h | 308h-30fh | 310h-317h | 328h-32fh | 3f8h-3ffh PORT= 310h-317h | 100h-107h | 200h-207h | 300h-307h | 308h-30fh | 320h-327h | 328h-32fh | 3f8h-3ffh PORT= 300h-307h | 100h-107h | 200h-207h | 308h-30fh | 310h-317h | 320h-327h | 328h-32fh | 3f8h-3ffh PORT= 308h-30fh | 100h-107h | 200h-207h | 300h-307h | 310h-317h | 320h-327h | 328h-32fh | 3f8h-3ffh FUNCTION="DTI/2xx, DMX, MSI/C IRQ Allocation" TYPE="DTI2XX" HELP="All DTI/2xx, DMX, and MSI/C modules must share an IRQ. Only allocate the IRQ for one of these modules, mark the rest as 'IRQ already allocated'." CHOICE="IRQ already allocated" SUBTYPE="DIS" DISABLE=YES CHOICE="Allocate DTI/2xx IRQ" FREE IRQ= 10 | 3 | 4 | 5 | 6 | 7 | 2 | 11 | 12 | 14 | 15 SOFTWARE(1) = "Consult the Network Hardware Reference documentation to determine the switch and/or jumper settings for the ISA boards."