;******************************************************************************
;
;   Intel i486(tm) 82350DT EISA Board
;       Version:        1.0
;       Date:           10/11/91
;
;******************************************************************************
BOARD
    ID="INT0011"
    NAME="Intel i486(tm) 82350DT EISA Board"
    MFR="INTEL FOLSOM"
    CATEGORY="SYS"
    SLOT=EMB(0)
    READID = YES

SYSTEM
    NONVOLATILE = 7936          ;8192-256=7936 : 256 is for BIOS reserve area.
    SLOT(1) = EISA
    SLOT(2) = EISA
    SLOT(3) = EISA
    SLOT(4) = EISA
    SLOT(5) = EISA
    SLOT(6) = EISA

    MEMORY = 640K   ADDRESS = 0K        CACHE = YES  STEP = 16K  ; Base memory
    MEMORY = 128K   ADDRESS = 640K      CACHE = NO               ; Video Ram
    MEMORY = 256K   ADDRESS = 768K      CACHE = YES  STEP = 16K  ; Video/Exp ROM/Sys. BIOS
    MEMORY = 4095M  ADDRESS = 1M        CACHE = YES  STEP = 16K  ; Ext. memory


;------------------------------------------------------------------------------
;                              Declare jumpers
;------------------------------------------------------------------------------

JUMPER  ( 1) = 1
    NAME     = "J1: "
    JTYPE    = PAIRED
    VERTICAL = NO
    REVERSE  = NO
    INITVAL  = LOC (1) 1
    FACTORY  = LOC (1) 1
    COMMENTS = "I/O RECOVERY - DO NOT REMOVE THIS JUMPER: This signal
                controls the delay between back to back ISA 8- and 16-bit
                I/O cycles from the CPU."

JUMPER  ( 6) = 1
    NAME     = "J6: "
    JTYPE    = PAIRED
    VERTICAL = YES
    REVERSE  = NO
    FACTORY  = LOC (1) 1
    COMMENTS = "MONITOR TYPE:  closed = Color Monitor
       \n                      open   = Monochrome Monitor
              \nThis setting must reflect the selection in the AT SETUP window."

JUMPER  (25) = 2
    NAME     = "J25: "
    JTYPE    = PAIRED
    VERTICAL = YES
    REVERSE  = YES
    LABEL    = LOC (1 2) "DS0" "DS1"
    FACTORY  = LOC (1 2)  00
    COMMENTS = "DRIVE SELECT: closed = 3.5 PS/2 Compatible drives
      \n                      open   = 5.25 or 3.5 AT compatible drives
              \nThese settings must reflect the selections in the AT SETUP window."

JUMPER  (31) = 1
    NAME     = "J31: "
    JTYPE    = TRIPOLE
    VERTICAL = YES
    REVERSE  = NO
    INITVAL  = LOC (1) 0
    FACTORY  = LOC (1) 0
    COMMENTS = "BIOS FLASH MEMORY VPP: jumper in left  = +5V
      \n                               jumper in right = +12V"

JUMPER  (39) = 1
    NAME     = "J39: "
    JTYPE    = PAIRED
    VERTICAL = NO
    REVERSE  = NO
    INITVAL  = LOC (1) 0
    FACTORY  = LOC (1) 0
    COMMENTS = "SYSTEM BUS POSTED WRITE:  closed = Enabled
      \n                                  open   = Disabled"

JUMPER  (50) = 1
    NAME     = "J50: "
    JTYPE    = PAIRED
    VERTICAL = YES
    REVERSE  = NO
    INITVAL  = LOC (1) 1
    FACTORY  = LOC (1) 1
    COMMENTS = "J50 is located on the CPU Module:  closed = 82485MB
      \n                                           open   = 82485 Cache Slice"

JUMPER  (51) = 1
    NAME     = "J51: "
    JTYPE    = PAIRED
    VERTICAL = YES
    REVERSE  = NO
    INITVAL  = LOC (1) 1
    FACTORY  = LOC (1) 1
    COMMENTS = "J51 is located on the CPU Module:  closed = 82485MB
      \n                                           open   = 82485 Cache Slice"

JUMPER  (52) = 1
    NAME     = "J52: "
    JTYPE    = PAIRED
    VERTICAL = YES
    REVERSE  = NO
    INITVAL  = LOC (1) 1
    FACTORY  = LOC (1) 1
    COMMENTS = "J52 is located on the CPU Module:  closed = 82485MB
      \n                                           open   = 82485 Cache Slice"


;------------------------------------------------------------------------------
;                                 System Memory
;------------------------------------------------------------------------------

GROUP = "System Main Memory"

FUNCTION = "Base Memory"
    TYPE = "MEM"
    CHOICE = "640K";
        FREE
          MEMORY = 640K
             ADDRESS = 0K
             WRITABLE = YES
             MEMTYPE = SYS
             CACHE = YES

FUNCTION = "Extended  Memory"
    TYPE = "MEM"
    HELP = "The amount of installed RAM for use as extended memory is
            user-selectable.  Please refer to the ECU documentation to
            find the appropriate menu option to 'change resources'."
    CHOICE = "You Choose:  1M - 64M"
        FREE
          MEMORY = 1M - 64M STEP = 1M
             ADDRESS = 1M
             WRITABLE = YES
             MEMTYPE = SYS
             CACHE = YES
ENDGROUP

;------------------------------------------------------------------------------
;                            Integrated Peripherals
;------------------------------------------------------------------------------

GROUP = "Integrated Peripheral"


FUNCTION = "Mouse"
    TYPE = "PTR"

    CHOICE = "Mouse:  Enabled"
      FREE
        INIT = PORTADR(022h) BYTE 00100001
        INIT = PORTADR(023h) BYTE 00000010      ; Enable LIO.E

        INIT = PORTADR(022h) BYTE 11000001      ; peripheral reg.B 0C1h
        INIT = PORTADR(023h) BYTE 11rrrrrr      ; Level mode, interrupt enable
        IRQ = 12
          SHARE = YES

    CHOICE = "Mouse:  Disabled"
      DISABLE = YES
      FREE
        INIT = PORTADR(022h) BYTE 00100001
        INIT = PORTADR(023h) BYTE 00000010      ; Enable LIO.E

        INIT = PORTADR(022h) BYTE 11000001      ; peripheral reg.B 0C1h
        INIT = PORTADR(023h) BYTE r0rrrrrr      ; interrupt disable

 ENDGROUP


;------------------------------------------------------------------------------
;                  Extented features to support misc. functions
;------------------------------------------------------------------------------

GROUP = "Misc. Setup Functions"

 FUNCTION = "Display Monitor Selection"
   COMMENTS = "This setting must reflect the selection in the AT SETUP window."
   CONNECTION = "J6:   1 = Color   0 = Monochrome"

   CHOICE = "Display Adapter Card:  Color"
        FREE
           INIT = JUMPER(6) LOC(1) 1
   CHOICE = "Display Adapter Card:  Monochrome"
        FREE
           INIT = JUMPER(6) LOC(1) 0

 ENDGROUP