;
; (C)Copyright Hewlett-Packard Co., 1989-1990
;    All Rights Reserved.
;

  BOARD
    ID = "HWP1C10"
    NAME = "HP Vectra 486 Serial Port and Parallel Port"
    MFR = "Hewlett-Packard Co."
    CATEGORY = "COM"
    SLOT = OTH, "HWP1C10"
    READID = NO
    AMPERAGE = 0
    LENGTH = 129

	IOPORT (1) = 0C40h
	SIZE = BYTE
	INITVAL = rxxxrrrrb

	IOPORT (2) = 0C41h
	SIZE = BYTE
	INITVAL = rrrrrxxxb


	FUNCTION = "Serial Port"
	TYPE = "COM,ASY"
	CONNECTION = "9-pin, male, D-type connector"
	HELP = "There are two built-in serial ports.  Each supports the
		use of four serial port configurations or may be disabled
		if necessary."
	  CHOICE = "COM1"
		SUBTYPE = "COM1"
		LINK
			IRQ = 4
				SHARE = NO
				TRIGGER = EDGE
			PORT = 03F8h-03FFh
				SHARE = NO
				SIZE = BYTE
			INIT = IOPORT (2)  LOC (2-0) 100
	  CHOICE = "COM2"
		SUBTYPE = "COM2"
		LINK
			IRQ = 3
				SHARE = NO
				TRIGGER = EDGE
			PORT = 02F8h-02FFh
				SHARE = NO
				SIZE = BYTE
			INIT = IOPORT (2)  LOC(2-0) 101
	  CHOICE = "COM3"
		SUBTYPE = "COM3"
		LINK
			IRQ = 10
				SHARE = NO
				TRIGGER = EDGE
			PORT = 03E8h-03EFh
				SHARE = NO
				SIZE = BYTE
			INIT = IOPORT(2)  LOC(2-0) 110
	  CHOICE = "COM4"
		SUBTYPE = "COM4"
		LINK
			IRQ = 11
				SHARE = NO
				TRIGGER = EDGE
			PORT = 02E8h-02EFh
				SHARE = NO
				SIZE = BYTE
			INIT = IOPORT(2)  LOC(2-0) 111
	  CHOICE = "Disabled"
		DISABLE = YES
		FREE
		INIT = IOPORT(2)  LOC(2) 0


	  FUNCTION = "Parallel Port Functions"
	    TYPE = "PAR"
	    CONNECTION = "25-pin, female, D-type connector"
	    HELP = "There is one built-in parallel port.  It supports the
		    use of two parallel port configurations and bidirectional
		    communications.  The parallel port may also be disabled."
	    SUBFUNCTION = "Parallel Port"
	      CHOICE = "LPT1"
		SUBTYPE = "LPT2"
		LINK
		  IRQ = 7
		    SHARE = NO
		    TRIGGER = EDGE
		  PORT = 0378h-037Fh
		    SHARE = NO
		    SIZE = BYTE
		  INIT = IOPORT(1) LOC(5 4) 10
	      CHOICE = "LPT2"
		SUBTYPE = "LPT3"
		LINK
		  IRQ = 5
		    SHARE = NO
		    TRIGGER = EDGE
		  PORT = 0278h-027Fh
		    SHARE = NO
		    SIZE = BYTE
		  INIT = IOPORT(1) LOC(5 4) 11
	      CHOICE = "Disabled"
		DISABLE = YES
		FREE
		  INIT = IOPORT(1) LOC(5) 0
	    SUBFUNCTION = "Parallel Port Bidirectionality"
	      CHOICE = "Disabled"
		      FREE
		      INIT = IOPORT(1) LOC(6) 0
	      CHOICE = "Enabled"
		      FREE
		      INIT = IOPORT(1) LOC(6) 1